qt_zh_cn.ts

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="zh_CN">
<context>
    <name>QPlatformTheme</name>
    <message>
        <source>OK</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation>确定(&amp;O)</translation>
    </message>
    <message>
        <source>&amp;No</source>
        <translation>否(&amp;N)</translation>
    </message>
    <message>
        <source>&amp;Yes</source>
        <translation>是(&amp;Y)</translation>
    </message>
    <message>
        <source>Help</source>
        <translation>帮助</translation>
    </message>
    <message>
        <source>Open</source>
        <translation>打开</translation>
    </message>
    <message>
        <source>Save</source>
        <translation>保存</translation>
    </message>
    <message>
        <source>&amp;Save</source>
        <translation>保存(&amp;S)</translation>
    </message>
    <message>
        <source>Abort</source>
        <translation>放弃</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Reset</source>
        <translation>重置</translation>
    </message>
    <message>
        <source>Retry</source>
        <translation>重试</translation>
    </message>
    <message>
        <source>Restore Defaults</source>
        <translation>恢复默认</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation>关闭(&amp;C)</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Ignore</source>
        <translation>忽略</translation>
    </message>
    <message>
        <source>Close without Saving</source>
        <translation>不保存关闭</translation>
    </message>
    <message>
        <source>N&amp;o to All</source>
        <translation>全部否(&amp;O)</translation>
    </message>
    <message>
        <source>Save All</source>
        <translation>保存全部</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation>取消(&amp;C)</translation>
    </message>
    <message>
        <source>Discard</source>
        <translation>抛弃</translation>
    </message>
    <message>
        <source>Yes to &amp;All</source>
        <translation>全部是(&amp;A)</translation>
    </message>
    <message>
        <source>Don&apos;t Save</source>
        <translation>不保存</translation>
    </message>
</context>
<context>
    <name>QKeySequenceEdit</name>
    <message>
        <source>Press shortcut</source>
        <translation>按下快捷键</translation>
    </message>
</context>
<context>
    <name>QShortcut</name>
    <message>
        <source>+</source>
        <translation>+</translation>
    </message>
    <message>
        <source>No</source>
        <translation>否</translation>
    </message>
    <message>
        <source>Left</source>
        <translation>←</translation>
    </message>
    <message>
        <source>Up</source>
        <translation>↑</translation>
    </message>
    <message>
        <source>Right</source>
        <translation>→</translation>
    </message>
    <message>
        <source>Down</source>
        <translation>↓</translation>
    </message>
    <message>
        <source>Alt</source>
        <translation>Alt</translation>
    </message>
    <message>
        <source>F%1</source>
        <translation>F%1</translation>
    </message>
    <message>
        <source>Del</source>
        <translation>Del</translation>
    </message>
    <message>
        <source>End</source>
        <translation>End</translation>
    </message>
    <message>
        <source>Esc</source>
        <translation>Esc</translation>
    </message>
    <message>
        <source>Ins</source>
        <translation>Ins</translation>
    </message>
    <message>
        <source>Tab</source>
        <translation>Tab</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation>是</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>后退</translation>
    </message>
    <message>
        <source>Call</source>
        <translation>呼叫</translation>
    </message>
    <message>
        <source>Ctrl</source>
        <translation>Ctrl</translation>
    </message>
    <message>
        <source>Flip</source>
        <translation>翻转</translation>
    </message>
    <message>
        <source>Help</source>
        <translation>Help</translation>
    </message>
    <message>
        <source>Home</source>
        <translation>Home</translation>
    </message>
    <message>
        <source>Menu</source>
        <translation>Menu</translation>
    </message>
    <message>
        <source>Meta</source>
        <translation>Meta</translation>
    </message>
    <message>
        <source>PgUp</source>
        <translation>PgUp</translation>
    </message>
    <message>
        <source>Stop</source>
        <translation>停止</translation>
    </message>
    <message>
        <source>Enter</source>
        <translation>Enter</translation>
    </message>
    <message>
        <source>Pause</source>
        <translation>Pause</translation>
    </message>
    <message>
        <source>Print</source>
        <translation>Print</translation>
    </message>
    <message>
        <source>Shift</source>
        <translation>Shift</translation>
    </message>
    <message>
        <source>Space</source>
        <translation>空格</translation>
    </message>
    <message>
        <source>Media Record</source>
        <translation>多媒体记录</translation>
    </message>
    <message>
        <source>Print Screen</source>
        <translation>Print Screen</translation>
    </message>
    <message>
        <source>Treble Down</source>
        <translation>调小高音</translation>
    </message>
    <message>
        <source>Scroll Lock</source>
        <translation>Scroll Lock</translation>
    </message>
    <message>
        <source>Volume Down</source>
        <translation>调小音量</translation>
    </message>
    <message>
        <source>Volume Mute</source>
        <translation>静音</translation>
    </message>
    <message>
        <source>Media Previous</source>
        <translation>上一个多媒体</translation>
    </message>
    <message>
        <source>Home Page</source>
        <translation>主页</translation>
    </message>
    <message>
        <source>Volume Up</source>
        <translation>调大音量</translation>
    </message>
    <message>
        <source>Launch (6)</source>
        <translation>启动 (6)</translation>
    </message>
    <message>
        <source>Launch (7)</source>
        <translation>启动 (7)</translation>
    </message>
    <message>
        <source>Launch (8)</source>
        <translation>启动 (8)</translation>
    </message>
    <message>
        <source>Launch (9)</source>
        <translation>启动 (9)</translation>
    </message>
    <message>
        <source>Launch (2)</source>
        <translation>启动 (2)</translation>
    </message>
    <message>
        <source>Launch (3)</source>
        <translation>启动 (3)</translation>
    </message>
    <message>
        <source>Launch (4)</source>
        <translation>启动 (4)</translation>
    </message>
    <message>
        <source>Launch (5)</source>
        <translation>启动 (5)</translation>
    </message>
    <message>
        <source>Launch (0)</source>
        <translation>启动 (0)</translation>
    </message>
    <message>
        <source>Launch (1)</source>
        <translation>启动 (1)</translation>
    </message>
    <message>
        <source>Launch (F)</source>
        <translation>启动 (F)</translation>
    </message>
    <message>
        <source>Launch (B)</source>
        <translation>启动 (B)</translation>
    </message>
    <message>
        <source>Launch (C)</source>
        <translation>启动 (C)</translation>
    </message>
    <message>
        <source>Launch (D)</source>
        <translation>启动 (D)</translation>
    </message>
    <message>
        <source>Launch (E)</source>
        <translation>启动 (E)</translation>
    </message>
    <message>
        <source>Launch (A)</source>
        <translation>启动 (A)</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>Delete</translation>
    </message>
    <message>
        <source>Escape</source>
        <translation>Escape</translation>
    </message>
    <message>
        <source>Hangup</source>
        <translation>挂起</translation>
    </message>
    <message>
        <source>Insert</source>
        <translation>Insert</translation>
    </message>
    <message>
        <source>Bass Boost</source>
        <translation>低音增强</translation>
    </message>
    <message>
        <source>PgDown</source>
        <translation>PgDown</translation>
    </message>
    <message>
        <source>Return</source>
        <translation>Return</translation>
    </message>
    <message>
        <source>Search</source>
        <translation>搜索</translation>
    </message>
    <message>
        <source>Select</source>
        <translation>选择</translation>
    </message>
    <message>
        <source>SysReq</source>
        <translation>SysReq</translation>
    </message>
    <message>
        <source>NumLock</source>
        <translation>NumLock</translation>
    </message>
    <message>
        <source>ScrollLock</source>
        <translation>ScrollLock</translation>
    </message>
    <message>
        <source>Context1</source>
        <translation>上下文1</translation>
    </message>
    <message>
        <source>Context2</source>
        <translation>上下文2</translation>
    </message>
    <message>
        <source>Context3</source>
        <translation>上下文3</translation>
    </message>
    <message>
        <source>Context4</source>
        <translation>上下文4</translation>
    </message>
    <message>
        <source>Page Up</source>
        <translation>Page Up</translation>
    </message>
    <message>
        <source>Open URL</source>
        <translation>打开URL</translation>
    </message>
    <message>
        <source>Caps Lock</source>
        <translation>Caps Lock</translation>
    </message>
    <message>
        <source>System Request</source>
        <translation>System Request</translation>
    </message>
    <message>
        <source>CapsLock</source>
        <translation>CapsLock</translation>
    </message>
    <message>
        <source>Backtab</source>
        <translation>Backtab</translation>
    </message>
    <message>
        <source>Bass Up</source>
        <translation>调大低音</translation>
    </message>
    <message>
        <source>Refresh</source>
        <translation>刷新</translation>
    </message>
    <message>
        <source>Launch Mail</source>
        <translation>启动邮件</translation>
    </message>
    <message>
        <source>Backspace</source>
        <translation>Backspace</translation>
    </message>
    <message>
        <source>Bass Down</source>
        <translation>调小低音</translation>
    </message>
    <message>
        <source>Standby</source>
        <translation>等待</translation>
    </message>
    <message>
        <source>Treble Up</source>
        <translation>调大高音</translation>
    </message>
    <message>
        <source>Num Lock</source>
        <translation>Num Lock</translation>
    </message>
    <message>
        <source>Number Lock</source>
        <translation>Number Lock</translation>
    </message>
    <message>
        <source>Favorites</source>
        <translation>最喜爱的</translation>
    </message>
    <message>
        <source>Forward</source>
        <translation>前进</translation>
    </message>
    <message>
        <source>Page Down</source>
        <translation>Page Down</translation>
    </message>
    <message>
        <source>Media Play</source>
        <translation>多媒体播放</translation>
    </message>
    <message>
        <source>Media Stop</source>
        <translation>多媒体停止</translation>
    </message>
    <message>
        <source>Media Next</source>
        <translation>下一个多媒体</translation>
    </message>
    <message>
        <source>Launch Media</source>
        <translation>启动多媒体</translation>
    </message>
</context>
<context>
    <name>QPrintDialog</name>
    <message>
        <source>A0</source>
        <translation>A0</translation>
    </message>
    <message>
        <source>A1</source>
        <translation>A1</translation>
    </message>
    <message>
        <source>A2</source>
        <translation>A2</translation>
    </message>
    <message>
        <source>A3</source>
        <translation>A3</translation>
    </message>
    <message>
        <source>A4</source>
        <translation>A4</translation>
    </message>
    <message>
        <source>A5</source>
        <translation>A5</translation>
    </message>
    <message>
        <source>A6</source>
        <translation>A6</translation>
    </message>
    <message>
        <source>A7</source>
        <translation>A7</translation>
    </message>
    <message>
        <source>A8</source>
        <translation>A8</translation>
    </message>
    <message>
        <source>A9</source>
        <translation>A9</translation>
    </message>
    <message>
        <source>B0</source>
        <translation>B0</translation>
    </message>
    <message>
        <source>B1</source>
        <translation>B1</translation>
    </message>
    <message>
        <source>B2</source>
        <translation>B2</translation>
    </message>
    <message>
        <source>B3</source>
        <translation>B3</translation>
    </message>
    <message>
        <source>B4</source>
        <translation>B4</translation>
    </message>
    <message>
        <source>B5</source>
        <translation>B5</translation>
    </message>
    <message>
        <source>B6</source>
        <translation>B6</translation>
    </message>
    <message>
        <source>B7</source>
        <translation>B7</translation>
    </message>
    <message>
        <source>B8</source>
        <translation>B8</translation>
    </message>
    <message>
        <source>B9</source>
        <translation>B9</translation>
    </message>
    <message>
        <source>OK</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>B10</source>
        <translation>B10</translation>
    </message>
    <message>
        <source>C5E</source>
        <translation>C5E</translation>
    </message>
    <message>
        <source>DLE</source>
        <translation>DLE</translation>
    </message>
    <message>
        <source>A6 (105 x 148 mm)</source>
        <translation>A6 (105 x 148 毫米)</translation>
    </message>
    <message>
        <source>Legal (8.5 x 14 inches, 216 x 356 mm)</source>
        <translation>Legal (8.5 x 14 英寸，216 x 356 毫米)</translation>
    </message>
    <message>
        <source>Folio</source>
        <translation>对开纸</translation>
    </message>
    <message>
        <source>Legal</source>
        <translation>法律文书</translation>
    </message>
    <message>
        <source>Print all</source>
        <translation>打印全部</translation>
    </message>
    <message>
        <source>Print</source>
        <translation>打印</translation>
    </message>
    <message>
        <source>&amp;Options &lt;&lt;</source>
        <translation>选项(&amp;O) &lt;&lt;</translation>
    </message>
    <message>
        <source>&amp;Options &gt;&gt;</source>
        <translation>选项(&amp;O) &gt;&gt;</translation>
    </message>
    <message>
        <source>B6 (125 x 176 mm)</source>
        <translation>B6 (125 x 176 毫米)</translation>
    </message>
    <message>
        <source>B8 (62 x 88 mm)</source>
        <translation>B8 (62 x 88 毫米)</translation>
    </message>
    <message>
        <source>A8 (52 x 74 mm)</source>
        <translation>A8 (52 x 74 毫米)</translation>
    </message>
    <message>
        <source>B9 (44 x 62 mm)</source>
        <translation>B9 (44 x 62 毫米)</translation>
    </message>
    <message>
        <source>A9 (37 x 52 mm)</source>
        <translation>A9 (37 x 52 毫米)</translation>
    </message>
    <message>
        <source>B0 (1000 x 1414 mm)</source>
        <translation>B0 (1000 x 1414 毫米)</translation>
    </message>
    <message>
        <source>A5 (148 x 210 mm)</source>
        <translation>A5 (148 x 210 毫米)</translation>
    </message>
    <message>
        <source>Tabloid (279 x 432 mm)</source>
        <translation>Tabloid (279 x 432 毫米)</translation>
    </message>
    <message>
        <source>B10 (31 x 44 mm)</source>
        <translation>B10 (31 x 44 毫米)</translation>
    </message>
    <message>
        <source>B2 (500 x 707 mm)</source>
        <translation>B2 (500 x 707 毫米)</translation>
    </message>
    <message>
        <source>&amp;Print</source>
        <translation>打印(&amp;P)</translation>
    </message>
    <message>
        <source>A3 (297 x 420 mm)</source>
        <translation>A3 (297 x 420 毫米)</translation>
    </message>
    <message>
        <source>Print selection</source>
        <translation>打印选择</translation>
    </message>
    <message>
        <source>Print to File (Postscript)</source>
        <translation>打印到文件(Postscript)</translation>
    </message>
    <message>
        <source>B4 (250 x 353 mm)</source>
        <translation>B4 (250 x 353 毫米)</translation>
    </message>
    <message>
        <source>%1 already exists.
Do you want to overwrite it?</source>
        <translation>%1已经存在。
你想覆盖它么？</translation>
    </message>
    <message>
        <source>A1 (594 x 841 mm)</source>
        <translation>A1 (594 x 841 毫米)</translation>
    </message>
    <message>
        <source>Custom</source>
        <translation>自定义</translation>
    </message>
    <message>
        <source>B1 (707 x 1000 mm)</source>
        <translation>B1 (707 x 1000 毫米)</translation>
    </message>
    <message>
        <source>Folio (210 x 330 mm)</source>
        <translation>Folio (210 x 330 毫米)</translation>
    </message>
    <message>
        <source>Ledger</source>
        <translation>帐页</translation>
    </message>
    <message>
        <source>Letter</source>
        <translation>信纸</translation>
    </message>
    <message>
        <source>DLE (110 x 220 mm)</source>
        <translation>DLE (110 x 220 毫米)</translation>
    </message>
    <message>
        <source>C5E (163 x 229 mm)</source>
        <translation>C5E (163 x 229 毫米)</translation>
    </message>
    <message>
        <source>B5 (176 x 250 mm, 6.93 x 9.84 inches)</source>
        <translation>B5 (176 x 250 毫米，6.93 x 9.84 英寸)</translation>
    </message>
    <message>
        <source>Print range</source>
        <translation>打印范围</translation>
    </message>
    <message>
        <source>File exists</source>
        <translation>文件存在</translation>
    </message>
    <message>
        <source>Write %1 file</source>
        <translation>写入 %1 文件</translation>
    </message>
    <message>
        <source>A0 (841 x 1189 mm)</source>
        <translation>A0 (841 x 1189 毫米)</translation>
    </message>
    <message>
        <source>Local file</source>
        <translation>本地文件</translation>
    </message>
    <message>
        <source>locally connected</source>
        <translation>本地已经连接的</translation>
    </message>
    <message>
        <source>Ledger (432 x 279 mm)</source>
        <translation>Ledger (432 x 279 毫米)</translation>
    </message>
    <message>
        <source>Aliases: %1</source>
        <translation>别名：%1</translation>
    </message>
    <message>
        <source>Print to File (PDF)</source>
        <translation>打印到文件(PDF)</translation>
    </message>
    <message>
        <source>Print To File ...</source>
        <translation>打印到文件……</translation>
    </message>
    <message>
        <source>US Common #10 Envelope (105 x 241 mm)</source>
        <translation>美国普通10号信封 (105 x 241 毫米)</translation>
    </message>
    <message>
        <source>Tabloid</source>
        <translation>小型报纸</translation>
    </message>
    <message>
        <source>A4 (210 x 297 mm, 8.26 x 11.7 inches)</source>
        <translation>A4 (210 x 297 毫米，8.26 x 11.7 英寸)</translation>
    </message>
    <message>
        <source>Executive</source>
        <translation>决策文书</translation>
    </message>
    <message>
        <source>unknown</source>
        <translation>未知的</translation>
    </message>
    <message>
        <source>&lt;qt&gt;Do you want to overwrite it?&lt;/qt&gt;</source>
        <translation>&lt;qt&gt;你想覆盖它么？&lt;/qt&gt;</translation>
    </message>
    <message>
        <source>Executive (7.5 x 10 inches, 191 x 254 mm)</source>
        <translation>Executive (7.5 x 10 英寸，191 x 254 毫米)</translation>
    </message>
    <message>
        <source>Letter (8.5 x 11 inches, 216 x 279 mm)</source>
        <translation>Letter (8.5 x 11 英寸，216 x 279 毫米)</translation>
    </message>
    <message>
        <source>The &apos;From&apos; value cannot be greater than the &apos;To&apos; value.</source>
        <translation>“从”的数值不能大于“到”的数值。</translation>
    </message>
    <message>
        <source>US Common #10 Envelope</source>
        <translation>美国普通10号信封</translation>
    </message>
    <message>
        <source>%1 is a directory.
Please choose a different file name.</source>
        <translation>%1是目录。
请选择一个不同的文件名。</translation>
    </message>
    <message>
        <source>File %1 is not writable.
Please choose a different file name.</source>
        <translation>文件%1不可写。
请选择一个不同的文件名。</translation>
    </message>
    <message>
        <source>B3 (353 x 500 mm)</source>
        <translation>B3 (353 x 500 毫米)</translation>
    </message>
    <message>
        <source>A7 (74 x 105 mm)</source>
        <translation>A7 (74 x 105 毫米)</translation>
    </message>
    <message>
        <source>A2 (420 x 594 mm)</source>
        <translation>A2 (420 x 594 毫米)</translation>
    </message>
    <message>
        <source>B7 (88 x 125 mm)</source>
        <translation>B7 (88 x 125 毫米)</translation>
    </message>
</context>
<context>
    <name>QDateTimeEdit</name>
    <message>
        <source>AM</source>
        <translation>AM</translation>
    </message>
    <message>
        <source>PM</source>
        <translation>PM</translation>
    </message>
    <message>
        <source>am</source>
        <translation>am</translation>
    </message>
    <message>
        <source>pm</source>
        <translation>pm</translation>
    </message>
</context>
<context>
    <name>Q3TabDialog</name>
    <message>
        <source>OK</source>
        <translation>确认</translation>
    </message>
    <message>
        <source>Help</source>
        <translation>帮助</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Defaults</source>
        <translation>默认</translation>
    </message>
</context>
<context>
    <name>QAxSelect</name>
    <message>
        <source>OK</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>COM &amp;Object:</source>
        <translation>COM对象(&amp;O)：</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation>取消(&amp;C)</translation>
    </message>
    <message>
        <source>Select ActiveX Control</source>
        <translation>选择ActiveX控件</translation>
    </message>
</context>
<context>
    <name>QDialogButtonBox</name>
    <message>
        <source>OK</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation>确定(&amp;O)</translation>
    </message>
    <message>
        <source>&amp;No</source>
        <translation>否(&amp;N)</translation>
    </message>
    <message>
        <source>&amp;Yes</source>
        <translation>是(&amp;Y)</translation>
    </message>
    <message>
        <source>Help</source>
        <translation>帮助</translation>
    </message>
    <message>
        <source>Open</source>
        <translation>打开</translation>
    </message>
    <message>
        <source>Save</source>
        <translation>保存</translation>
    </message>
    <message>
        <source>&amp;Save</source>
        <translation>保存(&amp;S)</translation>
    </message>
    <message>
        <source>Abort</source>
        <translation>放弃</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>应用</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Reset</source>
        <translation>重置</translation>
    </message>
    <message>
        <source>Retry</source>
        <translation>重试</translation>
    </message>
    <message>
        <source>Restore Defaults</source>
        <translation>恢复默认</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation>关闭(&amp;C)</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Ignore</source>
        <translation>忽略</translation>
    </message>
    <message>
        <source>Close without Saving</source>
        <translation>不保存关闭</translation>
    </message>
    <message>
        <source>N&amp;o to All</source>
        <translation>全部否(&amp;O)</translation>
    </message>
    <message>
        <source>Save All</source>
        <translation>保存全部</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation>取消(&amp;C)</translation>
    </message>
    <message>
        <source>Discard</source>
        <translation>抛弃</translation>
    </message>
    <message>
        <source>Yes to &amp;All</source>
        <translation>全部是(&amp;A)</translation>
    </message>
    <message>
        <source>Don&apos;t Save</source>
        <translation>不保存</translation>
    </message>
</context>
<context>
    <name>QMessageBox</name>
    <message>
        <source>Yes</source>
        <translation>是</translation>
    </message>
    <message>
        <source>No</source>
        <translation>否</translation>
    </message>
    <message>
        <source>OK</source>
        <translation>确定</translation>
    </message>
    <message>
        <source>Help</source>
        <translation>帮助</translation>
    </message>
    <message>
        <source>Show Details...</source>
        <translation>显示细节……</translation>
    </message>
    <message>
        <source>About Qt</source>
        <translation>关于Qt</translation>
    </message>
    <message>
        <source>Hide Details...</source>
        <translation>隐藏细节……</translation>
    </message>
</context>
<context>
    <name>QSql</name>
    <message>
        <source>No</source>
        <translation>否</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation>是</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <source>Insert</source>
        <translation>插入</translation>
    </message>
    <message>
        <source>Update</source>
        <translation>更新</translation>
    </message>
    <message>
        <source>Delete this record?</source>
        <translation>删除这条记录？</translation>
    </message>
    <message>
        <source>Save edits?</source>
        <translation>保存编辑？</translation>
    </message>
    <message>
        <source>Confirm</source>
        <translation>确认</translation>
    </message>
    <message>
        <source>Cancel your edits?</source>
        <translation>取消您的编辑？</translation>
    </message>
</context>
<context>
    <name>QPrintSettingsOutput</name>
    <message>
        <source>to</source>
        <translation>到</translation>
    </message>
    <message>
        <source>Form</source>
        <translation>窗体</translation>
    </message>
    <message>
        <source>None</source>
        <translation>无</translation>
    </message>
    <message>
        <source>Color</source>
        <translation>彩色</translation>
    </message>
    <message>
        <source>Print all</source>
        <translation>打印全部</translation>
    </message>
    <message>
        <source>Selection</source>
        <translation>选择</translation>
    </message>
    <message>
        <source>Long side</source>
        <translation>长侧</translation>
    </message>
    <message>
        <source>Copies</source>
        <translation>拷贝</translation>
    </message>
    <message>
        <source>Print range</source>
        <translation>打印范围</translation>
    </message>
    <message>
        <source>Color Mode</source>
        <translation>彩色模式</translation>
    </message>
    <message>
        <source>Options</source>
        <translation>选项</translation>
    </message>
    <message>
        <source>Output Settings</source>
        <translation>输出设置</translation>
    </message>
    <message>
        <source>Reverse</source>
        <translation>反向</translation>
    </message>
    <message>
        <source>Grayscale</source>
        <translation>灰度</translation>
    </message>
    <message>
        <source>Short side</source>
        <translation>短侧</translation>
    </message>
    <message>
        <source>Collate</source>
        <translation>校对</translation>
    </message>
    <message>
        <source>Copies:</source>
        <translation>备份：</translation>
    </message>
    <message>
        <source>Pages from</source>
        <translation>页数从</translation>
    </message>
    <message>
        <source>Duplex Printing</source>
        <translation>两部分打印</translation>
    </message>
</context>
<context>
    <name>QPrintPreviewDialog</name>
    <message>
        <source>%1%</source>
        <translation>%1%</translation>
    </message>
    <message>
        <source>Print Preview</source>
        <translation>打印预览</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Print</source>
        <translation>打印</translation>
    </message>
    <message>
        <source>Fit page</source>
        <translation>适应页面</translation>
    </message>
    <message>
        <source>Zoom in</source>
        <translation>放大</translation>
    </message>
    <message>
        <source>Landscape</source>
        <translation>横向</translation>
    </message>
    <message>
        <source>Zoom out</source>
        <translation>缩小</translation>
    </message>
    <message>
        <source>Fit width</source>
        <translation>适应宽度</translation>
    </message>
    <message>
        <source>Portrait</source>
        <translation>纵向</translation>
    </message>
    <message>
        <source>Page Setup</source>
        <translation>页面设置</translation>
    </message>
    <message>
        <source>Page setup</source>
        <translation>打印设置</translation>
    </message>
    <message>
        <source>Show overview of all pages</source>
        <translation>显示所有页的概览</translation>
    </message>
    <message>
        <source>First page</source>
        <translation>第一页</translation>
    </message>
    <message>
        <source>Last page</source>
        <translation>最后一页</translation>
    </message>
    <message>
        <source>Show single page</source>
        <translation>显示单页</translation>
    </message>
    <message>
        <source>Export to PDF</source>
        <translation>导出为PDF</translation>
    </message>
    <message>
        <source>Previous page</source>
        <translation>上一页</translation>
    </message>
    <message>
        <source>Next page</source>
        <translation>下一页</translation>
    </message>
    <message>
        <source>Show facing pages</source>
        <translation>显示当前页</translation>
    </message>
    <message>
        <source>Export to PostScript</source>
        <translation>导出为PostScript</translation>
    </message>
</context>
<context>
    <name>Q3FileDialog</name>
    <message>
        <source>&amp;OK</source>
        <translation>确定(&amp;O)</translation>
    </message>
    <message>
        <source>&amp;No</source>
        <translation>否(&amp;N)</translation>
    </message>
    <message>
        <source>Dir</source>
        <translation>目录</translation>
    </message>
    <message>
        <source>&amp;Yes</source>
        <translation>是(&amp;Y)</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>后退</translation>
    </message>
    <message>
        <source>Date</source>
        <translation>日期</translation>
    </message>
    <message>
        <source>File</source>
        <translation>文件</translation>
    </message>
    <message>
        <source>Name</source>
        <translation>名称</translation>
    </message>
    <message>
        <source>Open</source>
        <translation>打开</translation>
    </message>
    <message>
        <source>Size</source>
        <translation>大小</translation>
    </message>
    <message>
        <source>Sort</source>
        <translation>排列</translation>
    </message>
    <message>
        <source>Type</source>
        <translation>类型</translation>
    </message>
    <message>
        <source>&amp;Open</source>
        <translation>打开(&amp;O)</translation>
    </message>
    <message>
        <source>&amp;Save</source>
        <translation>保存(&amp;S)</translation>
    </message>
    <message>
        <source>Error</source>
        <translation>错误</translation>
    </message>
    <message>
        <source>Open </source>
        <translation>打开</translation>
    </message>
    <message>
        <source>Write: %1</source>
        <translation>写入：%1</translation>
    </message>
    <message>
        <source>Sort by &amp;Size</source>
        <translation>按大小排列(&amp;S)</translation>
    </message>
    <message>
        <source>Sort by &amp;Date</source>
        <translation>按日期排列(&amp;D)</translation>
    </message>
    <message>
        <source>Sort by &amp;Name</source>
        <translation>按名称排列(&amp;N)</translation>
    </message>
    <message>
        <source>New Folder 1</source>
        <translation>新建文件夹1</translation>
    </message>
    <message>
        <source>the directory</source>
        <translation>目录</translation>
    </message>
    <message>
        <source>File &amp;type:</source>
        <translation>文件类型(&amp;T)：</translation>
    </message>
    <message>
        <source>File &amp;name:</source>
        <translation>文件名称(&amp;N)：</translation>
    </message>
    <message>
        <source>Delete %1</source>
        <translation>删除%1</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>R&amp;eload</source>
        <translation>重新载入(&amp;E)</translation>
    </message>
    <message>
        <source>New Folder</source>
        <translation>新建文件夹</translation>
    </message>
    <message>
        <source>&amp;Unsorted</source>
        <translation>未排列的(&amp;U)</translation>
    </message>
    <message>
        <source>Look &amp;in:</source>
        <translation>查找范围(&amp;I)：</translation>
    </message>
    <message>
        <source>Preview File Contents</source>
        <translation>预览文件内容</translation>
    </message>
    <message>
        <source>New Folder %1</source>
        <translation>新建文件夹%1</translation>
    </message>
    <message>
        <source>Read-write</source>
        <translation>读写</translation>
    </message>
    <message>
        <source>Read-only</source>
        <translation>只读</translation>
    </message>
    <message>
        <source>Copy or Move a File</source>
        <translation>复制或者移动一个文件</translation>
    </message>
    <message>
        <source>&lt;qt&gt;Are you sure you wish to delete %1 &quot;%2&quot;?&lt;/qt&gt;</source>
        <translation>&lt;qt&gt;你确认你想删除%1，“%2”？&lt;/qt&gt;</translation>
    </message>
    <message>
        <source>Find Directory</source>
        <translation>查找目录</translation>
    </message>
    <message>
        <source>Attributes</source>
        <translation>属性</translation>
    </message>
    <message>
        <source>Show &amp;hidden files</source>
        <translation>显示隐藏文件(&amp;H)</translation>
    </message>
    <message>
        <source>Save As</source>
        <translation>另存为</translation>
    </message>
    <message>
        <source>Inaccessible</source>
        <translation>不可访问的</translation>
    </message>
    <message>
        <source>%1
File not found.
Check path and filename.</source>
        <translation>文件%1
未找到。
请检查路径和文件名。
</translation>
    </message>
    <message>
        <source>List View</source>
        <translation>列表视图</translation>
    </message>
    <message>
        <source>Special</source>
        <translation>特殊</translation>
    </message>
    <message>
        <source>Write-only</source>
        <translation>只写</translation>
    </message>
    <message>
        <source>the symlink</source>
        <translation>系统链接</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation>删除(&amp;D)</translation>
    </message>
    <message>
        <source>All Files (*)</source>
        <translation>所有文件 (*)</translation>
    </message>
    <message>
        <source>Directories</source>
        <translation>目录</translation>
    </message>
    <message>
        <source>Symlink to Special</source>
        <translation>特殊的系统链接</translation>
    </message>
    <message>
        <source>Select a Directory</source>
        <translation>选择一个目录</translation>
    </message>
    <message>
        <source>All Files (*.*)</source>
        <translation>所有文件 (*.*)</translation>
    </message>
    <message>
        <source>Read: %1</source>
        <translation>读取：%1</translation>
    </message>
    <message>
        <source>&amp;Rename</source>
        <translation>重命名(&amp;R)</translation>
    </message>
    <message>
        <source>Directory:</source>
        <translation>目录：</translation>
    </message>
    <message>
        <source>One directory up</source>
        <translation>向上一级</translation>
    </message>
    <message>
        <source>Preview File Info</source>
        <translation>预览文件信息</translation>
    </message>
    <message>
        <source>the file</source>
        <translation>文件</translation>
    </message>
    <message>
        <source>Create New Folder</source>
        <translation>创建新文件夹</translation>
    </message>
    <message>
        <source>Symlink to File</source>
        <translation>文件的系统链接</translation>
    </message>
    <message>
        <source>Symlink to Directory</source>
        <translation>目录的系统链接</translation>
    </message>
    <message>
        <source>Detail View</source>
        <translation>详细视图</translation>
    </message>
</context>
<context>
    <name>QErrorMessage</name>
    <message>
        <source>&amp;OK</source>
        <translation>确定(&amp;O)</translation>
    </message>
    <message>
        <source>Fatal Error:</source>
        <translation>致命错误：</translation>
    </message>
    <message>
        <source>&amp;Show this message again</source>
        <translation>再次显示这个消息(&amp;S)</translation>
    </message>
    <message>
        <source>Debug Message:</source>
        <translation>调试消息：</translation>
    </message>
    <message>
        <source>Warning:</source>
        <translation>警告：</translation>
    </message>
</context>
<context>
    <name>QPrintWidget</name>
    <message>
        <source>...</source>
        <translation>...</translation>
    </message>
    <message>
        <source>Form</source>
        <translation>窗体</translation>
    </message>
    <message>
        <source>Type:</source>
        <translation>类型：</translation>
    </message>
    <message>
        <source>&amp;Name:</source>
        <translation>名称(&amp;N)：</translation>
    </message>
    <message>
        <source>Output &amp;file:</source>
        <translation>输出文件(&amp;F)：</translation>
    </message>
    <message>
        <source>P&amp;roperties</source>
        <translation>属性(&amp;R)</translation>
    </message>
    <message>
        <source>Preview</source>
        <translation>预览</translation>
    </message>
    <message>
        <source>Printer</source>
        <translation>打印机</translation>
    </message>
    <message>
        <source>Location:</source>
        <translation>位置：</translation>
    </message>
</context>
<context>
    <name>QFontDatabase</name>
    <message>
        <source>Any</source>
        <translation>任意</translation>
    </message>
    <message>
        <source>Lao</source>
        <translation>老挝文</translation>
    </message>
    <message>
        <source>Bold</source>
        <translation>粗体</translation>
    </message>
    <message>
        <source>Demi</source>
        <translation>半体</translation>
    </message>
    <message>
        <source>Thai</source>
        <translation>泰国文</translation>
    </message>
    <message>
        <source>Black</source>
        <translation>黑体</translation>
    </message>
    <message>
        <source>Greek</source>
        <translation>希腊文</translation>
    </message>
    <message>
        <source>Khmer</source>
        <translation>谷美尔文</translation>
    </message>
    <message>
        <source>Latin</source>
        <translation>拉丁文</translation>
    </message>
    <message>
        <source>Light</source>
        <translation>轻体</translation>
    </message>
    <message>
        <source>Ogham</source>
        <translation>欧甘文</translation>
    </message>
    <message>
        <source>Oriya</source>
        <translation>奥里雅文</translation>
    </message>
    <message>
        <source>Runic</source>
        <translation>古北欧文</translation>
    </message>
    <message>
        <source>Tamil</source>
        <translation>泰米尔文</translation>
    </message>
    <message>
        <source>Cyrillic</source>
        <translation>西里尔文</translation>
    </message>
    <message>
        <source>Kannada</source>
        <translation>埃纳德文</translation>
    </message>
    <message>
        <source>Malayalam</source>
        <translation>马拉亚拉姆文</translation>
    </message>
    <message>
        <source>Simplified Chinese</source>
        <translation>简体中文</translation>
    </message>
    <message>
        <source>Demi Bold</source>
        <translation>半粗体</translation>
    </message>
    <message>
        <source>Arabic</source>
        <translation>阿拉伯文</translation>
    </message>
    <message>
        <source>Hebrew</source>
        <translation>希伯来文</translation>
    </message>
    <message>
        <source>Myanmar</source>
        <translation>缅甸文</translation>
    </message>
    <message>
        <source>Italic</source>
        <translation>斜体</translation>
    </message>
    <message>
        <source>Korean</source>
        <translation>韩文</translation>
    </message>
    <message>
        <source>Normal</source>
        <translation>普通</translation>
    </message>
    <message>
        <source>Oblique</source>
        <translation>斜体</translation>
    </message>
    <message>
        <source>Telugu</source>
        <translation>泰卢固文</translation>
    </message>
    <message>
        <source>Thaana</source>
        <translation>马尔代夫文</translation>
    </message>
    <message>
        <source>Symbol</source>
        <translation>符号</translation>
    </message>
    <message>
        <source>Syriac</source>
        <translation>叙利亚文</translation>
    </message>
    <message>
        <source>Devanagari</source>
        <translation>梵文</translation>
    </message>
    <message>
        <source>Japanese</source>
        <translation>日文</translation>
    </message>
    <message>
        <source>Bengali</source>
        <translation>孟加拉文</translation>
    </message>
    <message>
        <source>Armenian</source>
        <translation>亚美尼亚文</translation>
    </message>
    <message>
        <source>Sinhala</source>
        <translation>僧伽罗文</translation>
    </message>
    <message>
        <source>Tibetan</source>
        <translation>藏文</translation>
    </message>
    <message>
        <source>Vietnamese</source>
        <translation>越南文</translation>
    </message>
    <message>
        <source>Gujarati</source>
        <translation>古吉拉特文</translation>
    </message>
    <message>
        <source>Traditional Chinese</source>
        <translation>繁体中文</translation>
    </message>
    <message>
        <source>Georgian</source>
        <translation>格鲁吉亚文</translation>
    </message>
    <message>
        <source>Gurmukhi</source>
        <translation>旁遮普文</translation>
    </message>
</context>
<context>
    <name>QWebPage</name>
    <message>
        <source>Cut</source>
        <translation>剪切</translation>
    </message>
    <message>
        <source>LTR</source>
        <translation>LTR</translation>
    </message>
    <message>
        <source>RTL</source>
        <translation>RTL</translation>
    </message>
    <message>
        <source>Top</source>
        <translation>顶部</translation>
    </message>
    <message>
        <source>Bold</source>
        <translation>粗体</translation>
    </message>
    <message>
        <source>Copy</source>
        <translation>复制</translation>
    </message>
    <message>
        <source>Stop</source>
        <translation>停止</translation>
    </message>
    <message>
        <source>Open Frame</source>
        <translation>打开框架</translation>
    </message>
    <message>
        <source>Open Image</source>
        <translation>打开图片</translation>
    </message>
    <message>
        <source>Fonts</source>
        <translation>字体</translation>
    </message>
    <message>
        <source>Paste</source>
        <translation>粘贴</translation>
    </message>
    <message>
        <source>Reset</source>
        <translation>重置</translation>
    </message>
    <message>
        <source>Inspect</source>
        <translation>检查</translation>
    </message>
    <message>
        <source>Select to the start of the block</source>
        <translation>选中到块首</translation>
    </message>
    <message>
        <source>Move the cursor to the end of the block</source>
        <translation>移动光标到块尾</translation>
    </message>
    <message>
        <source>Select to the start of the line</source>
        <translation>选中到行首</translation>
    </message>
    <message>
        <source>Look Up In Dictionary</source>
        <translation>在字典中查找</translation>
    </message>
    <message>
        <source>Search The Web</source>
        <translation>搜索网页</translation>
    </message>
    <message>
        <source>Check Spelling While Typing</source>
        <translation>在输入时检查拼写</translation>
    </message>
    <message>
        <source>Add To Dictionary</source>
        <translation>添加到字典</translation>
    </message>
    <message>
        <source>Delete to the start of the word</source>
        <translation>删除到单词首</translation>
    </message>
    <message>
        <source>Recent searches</source>
        <translation>最近的搜索</translation>
    </message>
    <message>
        <source>Move the cursor to the next word</source>
        <translation>移动光标到下一个单词</translation>
    </message>
    <message>
        <source>Move the cursor to the next line</source>
        <translation>移动光标到下一行</translation>
    </message>
    <message>
        <source>JavaScript Alert - %1</source>
        <translation>JavaScript警告 - %1</translation>
    </message>
    <message>
        <source>Scroll down</source>
        <translation>向下滚动</translation>
    </message>
    <message>
        <source>Scroll here</source>
        <translation>滚动到这里</translation>
    </message>
    <message>
        <source>Scroll left</source>
        <translation>向左滚动</translation>
    </message>
    <message>
        <source>Move the cursor to the start of the block</source>
        <translation>移动光标到块首</translation>
    </message>
    <message>
        <source>Text Direction</source>
        <translation>文本方向</translation>
    </message>
    <message>
        <source>Bottom</source>
        <translation>底部</translation>
    </message>
    <message>
        <source>Ignore</source>
        <translation>忽略</translation>
    </message>
    <message>
        <source>Italic</source>
        <translation>斜体</translation>
    </message>
    <message>
        <source>Move the cursor to the end of the line</source>
        <translation>移动光标到行尾</translation>
    </message>
    <message>
        <source>Move the cursor to the start of the line</source>
        <translation>移动光标到行首</translation>
    </message>
    <message>
        <source>Reload</source>
        <translation>重新载入</translation>
    </message>
    <message>
        <source>JavaScript Confirm - %1</source>
        <translation>JavaScript确认 - %1</translation>
    </message>
    <message>
        <source>Submit</source>
        <translation>提交</translation>
    </message>
    <message>
        <source>Web Inspector - %2</source>
        <translation>网页检查员 - %2</translation>
    </message>
    <message>
        <source>Page up</source>
        <translation>上一页</translation>
    </message>
    <message>
        <source>Spelling</source>
        <translation>拼写</translation>
    </message>
    <message>
        <source>Outline</source>
        <translation>轮廓</translation>
    </message>
    <message>
        <source>Check Grammar With Spelling</source>
        <translation>检查语法和拼写</translation>
    </message>
    <message>
        <source>No file selected</source>
        <translation>没有文件被选择</translation>
    </message>
    <message>
        <source>Ignore</source>
        <comment>Ignore Grammar context menu item</comment>
        <translation>忽略</translation>
    </message>
    <message>
        <source>Save Image</source>
        <translation>保存图片</translation>
    </message>
    <message>
        <source>Save Link...</source>
        <translation>保存链接...</translation>
    </message>
    <message>
        <source>No recent searches</source>
        <translation>没有最近的搜索</translation>
    </message>
    <message>
        <source>Page right</source>
        <translation>右一页</translation>
    </message>
    <message>
        <source>Move the cursor to the start of the document</source>
        <translation>移动光标到文件开头</translation>
    </message>
    <message>
        <source>Move the cursor to the next character</source>
        <translation>移动光标到下一个字符</translation>
    </message>
    <message>
        <source>JavaScript Prompt - %1</source>
        <translation>JavaScript提示 - %1</translation>
    </message>
    <message>
        <source>Copy Link</source>
        <translation>复制链接</translation>
    </message>
    <message>
        <source>Select to the previous line</source>
        <translation>选中到上一行</translation>
    </message>
    <message>
        <source>Select to the previous word</source>
        <translation>选中到上一个单词</translation>
    </message>
    <message>
        <source>Check Spelling</source>
        <translation>检查拼写</translation>
    </message>
    <message>
        <source>Select to the next character</source>
        <translation>选中到下一个字符</translation>
    </message>
    <message>
        <source>Show Spelling and Grammar</source>
        <translation>显示拼写和语法</translation>
    </message>
    <message>
        <source>Delete to the end of the word</source>
        <translation>删除到单词尾</translation>
    </message>
    <message>
        <source>Direction</source>
        <translation>方向</translation>
    </message>
    <message>
        <source>Select to the end of the line</source>
        <translation>选中到行尾</translation>
    </message>
    <message>
        <source>Submit</source>
        <comment>Submit (input element) alt text for &lt;input&gt; elements with no alt, title, or value</comment>
        <translation>提交</translation>
    </message>
    <message>
        <source>Choose File</source>
        <translation>选择文件</translation>
    </message>
    <message>
        <source>Scroll up</source>
        <translation>向上滚动</translation>
    </message>
    <message>
        <source>Clear recent searches</source>
        <translation>清除最近的搜索</translation>
    </message>
    <message>
        <source>Select to the start of the document</source>
        <translation>选中到文件首</translation>
    </message>
    <message>
        <source>Default</source>
        <translation>默认</translation>
    </message>
    <message>
        <source>Underline</source>
        <translation>下划线</translation>
    </message>
    <message>
        <source>Move the cursor to the previous character</source>
        <translation>移动光标到上一个字符</translation>
    </message>
    <message>
        <source>Copy Image</source>
        <translation>复制图片</translation>
    </message>
    <message>
        <source>Select to the end of the document</source>
        <translation>选中到文件尾</translation>
    </message>
    <message>
        <source>Select to the end of the block</source>
        <translation>选中到块尾</translation>
    </message>
    <message>
        <source>Scroll right</source>
        <translation>向右滚动</translation>
    </message>
    <message>
        <source>No Guesses Found</source>
        <translation>没有找到猜测</translation>
    </message>
    <message>
        <source>Open Link</source>
        <translation>打开链接</translation>
    </message>
    <message>
        <source>Bad HTTP request</source>
        <translation>错误的 HTTP 请求</translation>
    </message>
    <message>
        <source>Unknown</source>
        <translation>未知的</translation>
    </message>
    <message>
        <source>Move the cursor to the previous word</source>
        <translation>移动光标到上一个单词</translation>
    </message>
    <message>
        <source>Move the cursor to the previous line</source>
        <translation>移动光标到上一行</translation>
    </message>
    <message numerus="yes">
        <source>%n file(s)</source>
        <translation>
            <numerusform>%n 个文件</numerusform>
        </translation>
    </message>
    <message>
        <source>Left edge</source>
        <translation>左边缘</translation>
    </message>
    <message>
        <source>Go Forward</source>
        <translation>前进</translation>
    </message>
    <message>
        <source>Page down</source>
        <translation>下一页</translation>
    </message>
    <message>
        <source>Page left</source>
        <translation>左一页</translation>
    </message>
    <message>
        <source>This is a searchable index. Enter search keywords: </source>
        <translation>这是一个可以搜索的索引。请输入要搜索的关键字：</translation>
    </message>
    <message>
        <source>Select to the previous character</source>
        <translation>选中到上一个字符</translation>
    </message>
    <message>
        <source>Go Back</source>
        <translation>后退</translation>
    </message>
    <message>
        <source>Open in New Window</source>
        <translation>在新窗口中打开</translation>
    </message>
    <message>
        <source>Right edge</source>
        <translation>右边缘</translation>
    </message>
    <message>
        <source>Move the cursor to the end of the document</source>
        <translation>移动光标到文件末尾</translation>
    </message>
    <message>
        <source>Hide Spelling and Grammar</source>
        <translation>隐藏拼写和语法</translation>
    </message>
    <message>
        <source>%1 (%2x%3 pixels)</source>
        <translation>%1 （%2x%3 像素）</translation>
    </message>
    <message>
        <source>Select to the next word</source>
        <translation>选中到下一个单词</translation>
    </message>
    <message>
        <source>Select to the next line</source>
        <translation>选中到下一行</translation>
    </message>
</context>
<context>
    <name>QScrollBar</name>
    <message>
        <source>Top</source>
        <translation>顶部</translation>
    </message>
    <message>
        <source>Scroll down</source>
        <translation>向下滚动</translation>
    </message>
    <message>
        <source>Scroll here</source>
        <translation>滚动到这里</translation>
    </message>
    <message>
        <source>Scroll left</source>
        <translation>向左滚动</translation>
    </message>
    <message>
        <source>Line up</source>
        <translation>向上排列</translation>
    </message>
    <message>
        <source>Line down</source>
        <translation>向下排列</translation>
    </message>
    <message>
        <source>Bottom</source>
        <translation>底部</translation>
    </message>
    <message>
        <source>Page up</source>
        <translation>上一页</translation>
    </message>
    <message>
        <source>Position</source>
        <translation>位置</translation>
    </message>
    <message>
        <source>Page right</source>
        <translation>右一页</translation>
    </message>
    <message>
        <source>Scroll up</source>
        <translation>向上滚动</translation>
    </message>
    <message>
        <source>Scroll right</source>
        <translation>向右滚动</translation>
    </message>
    <message>
        <source>Left edge</source>
        <translation>左边缘</translation>
    </message>
    <message>
        <source>Page down</source>
        <translation>下一页</translation>
    </message>
    <message>
        <source>Page left</source>
        <translation>左一页</translation>
    </message>
    <message>
        <source>Right edge</source>
        <translation>右边缘</translation>
    </message>
</context>
<context>
    <name>QInputContext</name>
    <message>
        <source>XIM</source>
        <translation>XIM</translation>
    </message>
    <message>
        <source>Windows input method</source>
        <translation>Windows输入法</translation>
    </message>
    <message>
        <source>XIM input method</source>
        <translation>XIM输入法</translation>
    </message>
    <message>
        <source>Mac OS X input method</source>
        <translation>Mac OS X输入法</translation>
    </message>
</context>
<context>
    <name>QFileDialog</name>
    <message>
        <source>Back</source>
        <translation>后退</translation>
    </message>
    <message>
        <source>File</source>
        <translation>文件</translation>
    </message>
    <message>
        <source>Open</source>
        <translation>打开</translation>
    </message>
    <message>
        <source>&amp;Open</source>
        <translation>打开(&amp;O)</translation>
    </message>
    <message>
        <source>&amp;Save</source>
        <translation>保存(&amp;S)</translation>
    </message>
    <message>
        <source>Drive</source>
        <translation>驱动器</translation>
    </message>
    <message>
        <source>Show </source>
        <translation>显示 </translation>
    </message>
    <message>
        <source>&apos;%1&apos; is write protected.
Do you want to delete it anyway?</source>
        <translation>“%1“是写保护的。
你还是想删除它么？</translation>
    </message>
    <message>
        <source>File &amp;name:</source>
        <translation>文件名称(&amp;N)：</translation>
    </message>
    <message>
        <source>New Folder</source>
        <translation>新建文件夹</translation>
    </message>
    <message>
        <source>Parent Directory</source>
        <translation>父目录</translation>
    </message>
    <message>
        <source>&amp;New Folder</source>
        <translation>新建文件夹(&amp;N)</translation>
    </message>
    <message>
        <source>Remove</source>
        <translation>移除</translation>
    </message>
    <message>
        <source>My Computer</source>
        <translation>我的计算机</translation>
    </message>
    <message>
        <source>Look in:</source>
        <translation>查看：</translation>
    </message>
    <message>
        <source>Files of type:</source>
        <translation>文件类型：</translation>
    </message>
    <message>
        <source>Find Directory</source>
        <translation>查找目录</translation>
    </message>
    <message>
        <source>Show &amp;hidden files</source>
        <translation>显示隐藏文件(&amp;H)</translation>
    </message>
    <message>
        <source>Are sure you want to delete &apos;%1&apos;?</source>
        <translation>你确认你想删除“%1“？</translation>
    </message>
    <message>
        <source>Save As</source>
        <translation>另存为</translation>
    </message>
    <message>
        <source>%1
Directory not found.
Please verify the correct directory name was given.</source>
        <translation>目录%1
没有找到。
请核实已给定正确目录名。</translation>
    </message>
    <message>
        <source>List View</source>
        <translation>列表视图</translation>
    </message>
    <message>
        <source>&amp;Choose</source>
        <translation>选择(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation>删除(&amp;D)</translation>
    </message>
    <message>
        <source>All Files (*)</source>
        <translation>所有文件 (*)</translation>
    </message>
    <message>
        <source>Directories</source>
        <translation>目录</translation>
    </message>
    <message>
        <source>All Files (*.*)</source>
        <translation>所有文件 (*.*)</translation>
    </message>
    <message>
        <source>&amp;Rename</source>
        <translation>重命名(&amp;R)</translation>
    </message>
    <message>
        <source>Could not delete directory.</source>
        <translation>不能删除目录。</translation>
    </message>
    <message>
        <source>Directory:</source>
        <translation>目录：</translation>
    </message>
    <message>
        <source>Unknown</source>
        <translation>未知的</translation>
    </message>
    <message>
        <source>%1 already exists.
Do you want to replace it?</source>
        <translation>%1已经存在。
你想要替换它么？</translation>
    </message>
    <message>
        <source>Forward</source>
        <translation>前进</translation>
    </message>
    <message>
        <source>Recent Places</source>
        <translation>最近的地方</translation>
    </message>
    <message>
        <source>Create New Folder</source>
        <translation>创建新文件夹</translation>
    </message>
    <message>
        <source>Detail View</source>
        <translation>详细视图</translation>
    </message>
    <message>
        <source>%1
File not found.
Please verify the correct file name was given.</source>
        <translation>文件%1
没有找到。
请核实已给定正确文件名。</translation>
    </message>
</context>
<context>
    <name>Q3TextEdit</name>
    <message>
        <source>Cu&amp;t</source>
        <translation>剪切(&amp;T)</translation>
    </message>
    <message>
        <source>&amp;Copy</source>
        <translation>复制(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Redo</source>
        <translation>恢复(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Undo</source>
        <translation>撤消(&amp;U)</translation>
    </message>
    <message>
        <source>Clear</source>
        <translation>清空</translation>
    </message>
    <message>
        <source>&amp;Paste</source>
        <translation>粘贴(&amp;P)</translation>
    </message>
    <message>
        <source>Select All</source>
        <translation>选择全部</translation>
    </message>
</context>
<context>
    <name>QLineEdit</name>
    <message>
        <source>Cu&amp;t</source>
        <translation>剪切(&amp;T)</translation>
    </message>
    <message>
        <source>&amp;Copy</source>
        <translation>复制(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Redo</source>
        <translation>恢复(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Undo</source>
        <translation>撤消(&amp;U)</translation>
    </message>
    <message>
        <source>&amp;Paste</source>
        <translation>粘贴(&amp;P)</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <source>Select All</source>
        <translation>选择全部</translation>
    </message>
</context>
<context>
    <name>QWidgetTextControl</name>
    <message>
        <source>Cu&amp;t</source>
        <translation>剪切(&amp;T)</translation>
    </message>
    <message>
        <source>&amp;Copy</source>
        <translation>复制(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Redo</source>
        <translation>恢复(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Undo</source>
        <translation>撤消(&amp;U)</translation>
    </message>
    <message>
        <source>&amp;Paste</source>
        <translation>粘贴(&amp;P)</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <source>Select All</source>
        <translation>选择全部</translation>
    </message>
    <message>
        <source>Copy &amp;Link Location</source>
        <translation>复制链接位置(&amp;L)</translation>
    </message>
</context>
<context>
    <name>QDockWidget</name>
    <message>
        <source>Dock</source>
        <translation>锚接</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Float</source>
        <translation>浮动</translation>
    </message>
</context>
<context>
    <name>QDialog</name>
    <message>
        <source>Done</source>
        <translation>完成</translation>
    </message>
    <message>
        <source>What&apos;s This?</source>
        <translation>这是什么？</translation>
    </message>
</context>
<context>
    <name>QWizard</name>
    <message>
        <source>Done</source>
        <translation>完成</translation>
    </message>
    <message>
        <source>Help</source>
        <translation>帮助</translation>
    </message>
    <message>
        <source>&amp;Help</source>
        <translation>帮助(&amp;H)</translation>
    </message>
    <message>
        <source>&amp;Next</source>
        <translation>下一步(&amp;N)</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Commit</source>
        <translation>提交</translation>
    </message>
    <message>
        <source>Continue</source>
        <translation>继续</translation>
    </message>
    <message>
        <source>&amp;Finish</source>
        <translation>完成(&amp;F)</translation>
    </message>
    <message>
        <source>&amp;Next &gt;</source>
        <translation>下一步(&amp;N) &gt;</translation>
    </message>
    <message>
        <source>Go Back</source>
        <translation>返回</translation>
    </message>
    <message>
        <source>&lt; &amp;Back</source>
        <translation>&lt; 上一步(&amp;B)</translation>
    </message>
</context>
<context>
    <name>QPageSetupWidget</name>
    <message>
        <source>Form</source>
        <translation>窗体</translation>
    </message>
    <message>
        <source>bottom margin</source>
        <translation>下边距</translation>
    </message>
    <message>
        <source>Paper</source>
        <translation>纸张</translation>
    </message>
    <message>
        <source>Paper source:</source>
        <translation>纸张源：</translation>
    </message>
    <message>
        <source>Centimeters (cm)</source>
        <translation>厘米 (cm)</translation>
    </message>
    <message>
        <source>right margin</source>
        <translation>右边距</translation>
    </message>
    <message>
        <source>Margins</source>
        <translation>边距</translation>
    </message>
    <message>
        <source>Landscape</source>
        <translation>横向</translation>
    </message>
    <message>
        <source>Width:</source>
        <translation>宽度：</translation>
    </message>
    <message>
        <source>Orientation</source>
        <translation>方向</translation>
    </message>
    <message>
        <source>Portrait</source>
        <translation>纵向</translation>
    </message>
    <message>
        <source>top margin</source>
        <translation>上边距</translation>
    </message>
    <message>
        <source>left margin</source>
        <translation>左边距</translation>
    </message>
    <message>
        <source>Page size:</source>
        <translation>纸张大小：</translation>
    </message>
    <message>
        <source>Reverse portrait</source>
        <translation>反向纵向</translation>
    </message>
    <message>
        <source>Millimeters (mm)</source>
        <translation>毫米 (mm)</translation>
    </message>
    <message>
        <source>Points (pt)</source>
        <translation>点 (pt)</translation>
    </message>
    <message>
        <source>Inches (in)</source>
        <translation>英寸 (in)</translation>
    </message>
    <message>
        <source>Reverse landscape</source>
        <translation>反向横向</translation>
    </message>
    <message>
        <source>Height:</source>
        <translation>高度：</translation>
    </message>
</context>
<context>
    <name>QPrintPropertiesWidget</name>
    <message>
        <source>Form</source>
        <translation>窗体</translation>
    </message>
    <message>
        <source>Page</source>
        <translation>页</translation>
    </message>
    <message>
        <source>Advanced</source>
        <translation>高级</translation>
    </message>
</context>
<context>
    <name>QMdiSubWindow</name>
    <message>
        <source>Help</source>
        <translation>帮助</translation>
    </message>
    <message>
        <source>Menu</source>
        <translation>菜单</translation>
    </message>
    <message>
        <source>&amp;Move</source>
        <translation>移动(&amp;M)</translation>
    </message>
    <message>
        <source>&amp;Size</source>
        <translation>大小(&amp;S)</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Minimize</source>
        <translation>最小化</translation>
    </message>
    <message>
        <source>Shade</source>
        <translation>遮蔽</translation>
    </message>
    <message>
        <source>Stay on &amp;Top</source>
        <translation>总在最前(&amp;T)</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation>关闭(&amp;C)</translation>
    </message>
    <message>
        <source>- [%1]</source>
        <translation>- [%1]</translation>
    </message>
    <message>
        <source>%1 - [%2]</source>
        <translation>%1 - [%2]</translation>
    </message>
    <message>
        <source>&amp;Restore</source>
        <translation>恢复(&amp;R)</translation>
    </message>
    <message>
        <source>Restore</source>
        <translation>恢复</translation>
    </message>
    <message>
        <source>Maximize</source>
        <translation>最大化</translation>
    </message>
    <message>
        <source>Unshade</source>
        <translation>取消遮蔽</translation>
    </message>
    <message>
        <source>Mi&amp;nimize</source>
        <translation>最小化(&amp;N)</translation>
    </message>
    <message>
        <source>Ma&amp;ximize</source>
        <translation>最大化(&amp;X)</translation>
    </message>
    <message>
        <source>Restore Down</source>
        <translation>向下恢复</translation>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <source>Home</source>
        <translation>家</translation>
    </message>
    <message>
        <source>Protocol error: packet of size 0 received</source>
        <translation>协议错误：收到了大小为 0 的包</translation>
    </message>
    <message>
        <source>Invalid URI: %1</source>
        <translation>无效的 URI：%1</translation>
    </message>
    <message>
        <source>Socket error on %1: %2</source>
        <translation>%1 上的套接字错误：%2</translation>
    </message>
    <message>
        <source>No host name given</source>
        <translation>未指定主机名</translation>
    </message>
    <message>
        <source>Read error reading from %1: %2</source>
        <translation>读取 %1 错误：%2</translation>
    </message>
    <message>
        <source>Remote host closed the connection prematurely on %1</source>
        <translation>远程主机过早地关闭了在 %1 上的这个连接</translation>
    </message>
    <message>
        <source>Operation not supported on %1</source>
        <translation>在 %1 上不被支持的操作</translation>
    </message>
    <message>
        <source>Write error writing to %1: %2</source>
        <translation>写入 %1 错误：%2</translation>
    </message>
</context>
<context>
    <name>QDirModel</name>
    <message>
        <source>Kind</source>
        <translation>类型</translation>
    </message>
    <message>
        <source>Name</source>
        <translation>名称</translation>
    </message>
    <message>
        <source>Size</source>
        <translation>大小</translation>
    </message>
    <message>
        <source>Type</source>
        <translation>类型</translation>
    </message>
    <message>
        <source>Date Modified</source>
        <translation>日期被修改</translation>
    </message>
</context>
<context>
    <name>QFileSystemModel</name>
    <message>
        <source>Kind</source>
        <translation>类型</translation>
    </message>
    <message>
        <source>Name</source>
        <translation>名称</translation>
    </message>
    <message>
        <source>Size</source>
        <translation>大小</translation>
    </message>
    <message>
        <source>Type</source>
        <translation>类型</translation>
    </message>
    <message>
        <source>%1 GB</source>
        <translation>%1 GB</translation>
    </message>
    <message>
        <source>%1 KB</source>
        <translation>%1千字节</translation>
    </message>
    <message>
        <source>%1 MB</source>
        <translation>%1 MB</translation>
    </message>
    <message>
        <source>%1 TB</source>
        <translation>%1 TB</translation>
    </message>
    <message>
        <source>&lt;b&gt;The name &quot;%1&quot; can not be used.&lt;/b&gt;&lt;p&gt;Try using another name, with fewer characters or no punctuations marks.</source>
        <translation>&lt;b&gt;名称“%1“不能被使用。&lt;/b&gt;&lt;p&gt;请使用另外一个包含更少字符或者不含有标点符号的名称。</translation>
    </message>
    <message>
        <source>%1 bytes</source>
        <translation>%1字节</translation>
    </message>
    <message>
        <source>My Computer</source>
        <translation>我的计算机</translation>
    </message>
    <message>
        <source>Computer</source>
        <translation>计算机</translation>
    </message>
    <message>
        <source>Invalid filename</source>
        <translation>无效文件名</translation>
    </message>
    <message>
        <source>Date Modified</source>
        <translation>日期被修改</translation>
    </message>
</context>
<context>
    <name>QDoubleSpinBox</name>
    <message>
        <source>Less</source>
        <translation>更少</translation>
    </message>
    <message>
        <source>More</source>
        <translation>更多</translation>
    </message>
</context>
<context>
    <name>QSpinBox</name>
    <message>
        <source>Less</source>
        <translation>更少</translation>
    </message>
    <message>
        <source>More</source>
        <translation>更多</translation>
    </message>
</context>
<context>
    <name>QPPDOptionsModel</name>
    <message>
        <source>Name</source>
        <translation>名称</translation>
    </message>
    <message>
        <source>Value</source>
        <translation>值</translation>
    </message>
</context>
<context>
    <name>QComboBox</name>
    <message>
        <source>Open</source>
        <translation>打开</translation>
    </message>
    <message>
        <source>True</source>
        <translation>真</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>False</source>
        <translation>假</translation>
    </message>
</context>
<context>
    <name>QMenu</name>
    <message>
        <source>Open</source>
        <translation>打开</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Execute</source>
        <translation>执行</translation>
    </message>
</context>
<context>
    <name>QPushButton</name>
    <message>
        <source>Open</source>
        <translation>打开</translation>
    </message>
</context>
<context>
    <name>QToolButton</name>
    <message>
        <source>Open</source>
        <translation>打开</translation>
    </message>
    <message>
        <source>Press</source>
        <translation>按下</translation>
    </message>
</context>
<context>
    <name>QUndoGroup</name>
    <message>
        <source>Redo</source>
        <translation>恢复</translation>
    </message>
    <message>
        <source>Undo</source>
        <translation>撤销</translation>
    </message>
</context>
<context>
    <name>QUndoStack</name>
    <message>
        <source>Redo</source>
        <translation>恢复</translation>
    </message>
    <message>
        <source>Undo</source>
        <translation>撤销</translation>
    </message>
</context>
<context>
    <name>Q3DataTable</name>
    <message>
        <source>True</source>
        <translation>真</translation>
    </message>
    <message>
        <source>False</source>
        <translation>假</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>删除</translation>
    </message>
    <message>
        <source>Insert</source>
        <translation>插入</translation>
    </message>
    <message>
        <source>Update</source>
        <translation>更新</translation>
    </message>
</context>
<context>
    <name>QSslSocket</name>
    <message>
        <source>Error creating SSL session: %1</source>
        <translation>创建SSL会话错误：%1</translation>
    </message>
    <message>
        <source>Error creating SSL session, %1</source>
        <translation>创建SSL会话错误，%1</translation>
    </message>
    <message>
        <source>Cannot provide a certificate with no key, %1</source>
        <translation>不能提供没有键的证书，%1</translation>
    </message>
    <message>
        <source>Unable to write data: %1</source>
        <translation>不能写入数据：%1</translation>
    </message>
    <message>
        <source>Error during SSL handshake: %1</source>
        <translation>SSL握手错误：%1</translation>
    </message>
    <message>
        <source>Error loading local certificate, %1</source>
        <translation>不能载入本地证书，%1</translation>
    </message>
    <message>
        <source>Invalid or empty cipher list (%1)</source>
        <translation>无效或者空白的密码列表（%1）</translation>
    </message>
    <message>
        <source>Private key does not certificate public key, %1</source>
        <translation>私有键不能验证公有键，%1</translation>
    </message>
    <message>
        <source>Error creating SSL context (%1)</source>
        <translation>创建SSL上下文错误（%1）</translation>
    </message>
    <message>
        <source>Error while reading: %1</source>
        <translation>读取时错误：%1</translation>
    </message>
    <message>
        <source>Error loading private key, %1</source>
        <translation>不能载入私有键，%1</translation>
    </message>
</context>
<context>
    <name>QLocalSocket</name>
    <message>
        <source>%1: Connection error</source>
        <translation>%1：连接错误</translation>
    </message>
    <message>
        <source>%1: Connection refused</source>
        <translation>%1：连接被拒绝</translation>
    </message>
    <message>
        <source>%1: Unknown error %2</source>
        <translation>%1：未知错误 %2</translation>
    </message>
    <message>
        <source>%1: Socket access error</source>
        <translation>%1：套接字访问错误</translation>
    </message>
    <message>
        <source>%1: Socket resource error</source>
        <translation>%1：套接字资源错误</translation>
    </message>
    <message>
        <source>%1: The socket operation is not supported</source>
        <translation>%1：套接字操作不被支持</translation>
    </message>
    <message>
        <source>%1: Invalid name</source>
        <translation>%1：无效名称</translation>
    </message>
    <message>
        <source>%1: Unknown error</source>
        <translation>%1：未知错误</translation>
    </message>
    <message>
        <source>%1: Socket operation timed out</source>
        <translation>%1：套接字操作超时</translation>
    </message>
    <message>
        <source>%1: Datagram too large</source>
        <translation>%1：数据报太大</translation>
    </message>
    <message>
        <source>%1: Remote closed</source>
        <translation>%1：远程已关闭</translation>
    </message>
</context>
<context>
    <name>QtXmlPatterns</name>
    <message>
        <source>A comment cannot contain %1</source>
        <translation>注释不能包含 %1</translation>
    </message>
    <message>
        <source>Version %1 is not supported. The supported XQuery version is 1.0.</source>
        <translation>不支持版本 %1。被支持的 XQuery 版本是 1.0。</translation>
    </message>
    <message>
        <source>The root node of the second argument to function %1 must be a document node. %2 is not a document node.</source>
        <translation>函数 %1 的第二个参数的根节点必须是一个文档节点。%2 不是一个文档节点。</translation>
    </message>
    <message>
        <source>The parameter %1 is required, but no corresponding %2 is supplied.</source>
        <translation>需要参数%1，但是没有提供对应的%2。</translation>
    </message>
    <message>
        <source>Namespace declarations must occur before function, variable, and option declarations.</source>
        <translation>命名空间声明必须出现在函数、变量和选项声明之前。</translation>
    </message>
    <message>
        <source>empty</source>
        <translation>空白</translation>
    </message>
    <message>
        <source>The namespace URI cannot be the empty string when binding to a prefix, %1.</source>
        <translation>当这个命名空间 URI 被绑定到一个前缀 %1 时，它不能是空字符串。</translation>
    </message>
    <message>
        <source>A comment cannot end with a %1.</source>
        <translation>注释不能以 %1 结尾。</translation>
    </message>
    <message>
        <source>Top level stylesheet elements must be in a non-null namespace, which %1 isn&apos;t.</source>
        <translation>顶级样式表元素必须是在非空命名空间中的，而%1不是。</translation>
    </message>
    <message>
        <source>Integer division (%1) by zero (%2) is undefined.</source>
        <translation>整数除法(%1)除零(%2)是未定义的。</translation>
    </message>
    <message>
        <source>A library module cannot be evaluated directly. It must be imported from a main module.</source>
        <translation>一个库模块不能被直接评估。它必须从一个主模块中导入。</translation>
    </message>
    <message>
        <source>Time %1:%2:%3.%4 is invalid.</source>
        <translation>时间 %1:%2:%3.%4 是无效的。</translation>
    </message>
    <message>
        <source>Attribute %1 cannot appear on the element %2. Only the standard attributes can appear.</source>
        <translation>属性%1不能出现在元素%2上。只有标准属性可以出现。</translation>
    </message>
    <message>
        <source>A value of type %1 must contain an even number of digits. The value %2 does not.</source>
        <translation>类型为 %1 的值必须包含偶数个数字。值 %2 不是这样的。</translation>
    </message>
    <message>
        <source>Modulus division (%1) by zero (%2) is undefined.</source>
        <translation>求模除法(%1)除零(%2)是未定义的。</translation>
    </message>
    <message>
        <source>No function with signature %1 is available</source>
        <translation>没有签名为 %1 的可用函数。</translation>
    </message>
    <message>
        <source>None of the pragma expressions are supported. Therefore, a fallback expression must be present</source>
        <translation>不支持任何编译指示表达式(pragma expression)。因此，必须呈现一个回调表达式(fallback expression)。</translation>
    </message>
    <message>
        <source>In the replacement string, %1 can only be used to escape itself or %2, not %3</source>
        <translation>在这个替换字符串中，%1 只能被用于转义它本身或者 %2，而不是 %3</translation>
    </message>
    <message>
        <source>The codepoint %1, occurring in %2 using encoding %3, is an invalid XML character.</source>
        <translation>在使用编码%3的%2中出现的代码点%1不是一个有效的XML字符。</translation>
    </message>
    <message>
        <source>Network timeout.</source>
        <translation>网络超时。</translation>
    </message>
    <message>
        <source>No casting is possible with %1 as the target type.</source>
        <translation>无法以 %1 为目标类型进行抛出。</translation>
    </message>
    <message>
        <source>The Schema Import feature is not supported, and therefore %1 declarations cannot occur.</source>
        <translation>不支持方案导入(Schema Import)特性，并且因此 %1 声明不能出现。</translation>
    </message>
    <message>
        <source>Attribute %1 and %2 are mutually exclusive.</source>
        <translation>属性%1和%2彼此互斥。</translation>
    </message>
    <message>
        <source>Parse error: %1</source>
        <translation>解析错误：%1</translation>
    </message>
    <message>
        <source>If the first argument is the empty sequence or a zero-length string (no namespace), a prefix cannot be specified. Prefix %1 was specified.</source>
        <translation>如果第一个参数是空序列或者零长度字符串(无命名空间)，那么就不能指定前缀。前缀 %1 被指定了。</translation>
    </message>
    <message>
        <source>In an XSL-T pattern, the first argument to function %1 must be a literal or a variable reference, when used for matching.</source>
        <translation>在XSL-T样式中，函数%1的第一个参数必须是文字或者变量参考，以便用于匹配。</translation>
    </message>
    <message>
        <source>At least one component must be present.</source>
        <translation>至少有一个组件被呈现。</translation>
    </message>
    <message>
        <source>An attribute by name %1 has already been created.</source>
        <translation>一个名称为 %1 的属性已经被创建。</translation>
    </message>
    <message>
        <source>An argument by name %1 has already been declared. Every argument name must be unique.</source>
        <translation>名称为 %1 的参数已经被声明了。每个参数名称必须唯一。</translation>
    </message>
    <message>
        <source>%1 is an invalid flag for regular expressions. Valid flags are:</source>
        <translation>%1 是正则表达式中的一个无效标记。有效标记为：</translation>
    </message>
    <message>
        <source>At least one %1-element must occur inside %2.</source>
        <translation>至少一个元素%1要出现在%2之内。</translation>
    </message>
    <message>
        <source>Only the Unicode Codepoint Collation is supported(%1). %2 is unsupported.</source>
        <translation>只支持 Unicode 代码点校验(Unicode Codepoint Collation)(%1)。%2 是不被支持的。</translation>
    </message>
    <message>
        <source>Matches are case insensitive</source>
        <translation>匹配是大小写不敏感的</translation>
    </message>
    <message>
        <source>The name of an extension expression must be in a namespace.</source>
        <translation>一个扩展表达式的名称必须在一个命名空间中。</translation>
    </message>
    <message>
        <source>Each name of a template parameter must be unique; %1 is duplicated.</source>
        <translation>每一个模板参数的名称都必须是唯一的；%2是重复的。</translation>
    </message>
    <message>
        <source>At least one mode must be specified in the %1-attribute on element %2.</source>
        <translation>在元素%2的%1属性中至少要指定一个模式。</translation>
    </message>
    <message>
        <source>%1 matches newline characters</source>
        <translation>%1 匹配了换行符</translation>
    </message>
    <message>
        <source>Year %1 is invalid because it begins with %2.</source>
        <translation>%1 年是无效的，因为应该从 %2 开始。</translation>
    </message>
    <message>
        <source>The second argument to %1 cannot be of type %2. It must be of type %3, %4, or %5.</source>
        <translation>%1 的第二个参数不能是类型 %2 的。它必须是类型 %3、%4 或者 %5 的。</translation>
    </message>
    <message>
        <source>Element %1 cannot have children.</source>
        <translation>元素%1不能有子元素。</translation>
    </message>
    <message>
        <source>Attribute %1 cannot appear on the element %2. Only %3 is allowed, and the standard attributes.</source>
        <translation>属性%1不能出现在元素%2上。只有%3和标准属性是允许的。</translation>
    </message>
    <message>
        <source>Only one %1-element can appear.</source>
        <translation>只能出现一个元素%1。</translation>
    </message>
    <message>
        <source>The name for a computed attribute cannot have the namespace URI %1 with the local name %2.</source>
        <translation>一个被计算的属性的名称不能使用带有本地名称 %2 的命名空间 URI %1。</translation>
    </message>
    <message>
        <source>A positional predicate must evaluate to a single numeric value.</source>
        <translation>一个定位判断必须评估一个单一数值。</translation>
    </message>
    <message>
        <source>Element %1 can&apos;t be serialized because it appears outside the document element.</source>
        <translation>元素 %1 不能被串行化，因为它出现在文档元素之外。</translation>
    </message>
    <message>
        <source>%1 and %2 match the start and end of a line.</source>
        <translation>%1 和 %2 匹配了一行的头和尾。</translation>
    </message>
    <message>
        <source>Running an XSL-T 1.0 stylesheet with a 2.0 processor.</source>
        <translation>在XSL-T 2.0处理器中运行一个1.0的样式表。</translation>
    </message>
    <message>
        <source>A stylesheet function must have a prefixed name.</source>
        <translation>样式表函数必须有一个前缀名。</translation>
    </message>
    <message>
        <source>%1 cannot be retrieved</source>
        <translation>无法获取 %1</translation>
    </message>
    <message>
        <source>It&apos;s not possible to cast the value %1 of type %2 to %3</source>
        <translation>无法从类型为 %2 的值 %1 抛出到 %3</translation>
    </message>
    <message>
        <source>The value of the XSL-T version attribute must be a value of type %1, which %2 isn&apos;t.</source>
        <translation>XSL-T版本属性的值必须是%1类型的值，而%2不是。</translation>
    </message>
    <message>
        <source>The prefix %1 cannot be bound.</source>
        <translation>前缀%1不能被绑定。</translation>
    </message>
    <message>
        <source>The prefix must be a valid %1, which %2 is not.</source>
        <translation>前缀必须是有效的%1，而%2不是。</translation>
    </message>
    <message>
        <source>The keyword %1 cannot occur with any other mode name.</source>
        <translation>任何其他模式名称不能出现关键字%1。</translation>
    </message>
    <message>
        <source>Type error in cast, expected %1, received %2.</source>
        <translation>抛出类型错误，期望的是 %1，收到的是 %2。</translation>
    </message>
    <message>
        <source>%1 is not a valid numeric literal.</source>
        <translation>%1 不是一个有效的数字语义。</translation>
    </message>
    <message numerus="yes">
        <source>%1 takes at most %n argument(s). %2 is therefore invalid.</source>
        <translation>
            <numerusform>%1 最多可以有 %n 个参数。因此 %2 是无效的。</numerusform>
        </translation>
    </message>
    <message>
        <source>Circularity detected</source>
        <translation>检测到环</translation>
    </message>
    <message>
        <source>A variable by name %1 has already been declared.</source>
        <translation>变量%1已被声明。</translation>
    </message>
    <message>
        <source>The prefix %1 can not be bound. By default, it is already bound to the namespace %2.</source>
        <translation>前缀%1不能被绑定。默认的，它已被绑定到名字空间%2。</translation>
    </message>
    <message>
        <source>An %1-attribute must have a valid %2 as value, which %3 isn&apos;t.</source>
        <translation>一个 %1 属性必须带有一个有效的 %2 作为值，但 %3 却不是。</translation>
    </message>
    <message>
        <source>If element %1 has no attribute %2, it cannot have attribute %3 or %4.</source>
        <translation>如果元素%1没有属性%2，那么它也不能有属性%3或者%4。</translation>
    </message>
    <message>
        <source>A function already exists with the signature %1.</source>
        <translation>一个带有签名 %1 的函数已经存在。</translation>
    </message>
    <message>
        <source>When casting to %1 from %2, the source value cannot be %3.</source>
        <translation>当从 %2 抛出到 %1 时，源值不能是 %3。</translation>
    </message>
    <message>
        <source>Attribute %1 can&apos;t be serialized because it appears at the top level.</source>
        <translation>属性 %1 不能被串行化，因为它出现在最顶层。</translation>
    </message>
    <message>
        <source>No comparisons can be done involving the type %1.</source>
        <translation>对于类型 %1 不能进行比较。</translation>
    </message>
    <message>
        <source>No value is available for the external variable by name %1.</source>
        <translation>名称为 %1 的外部变量并没有可用的值。</translation>
    </message>
    <message>
        <source>The value of attribute %1 must of type %2, which %3 isn&apos;t.</source>
        <translation>属性%1的值必须是类型%2，但%3不是。</translation>
    </message>
    <message>
        <source>The item %1 did not match the required type %2.</source>
        <translation>项 %1 和所需的类型 %2 不匹配。</translation>
    </message>
    <message>
        <source>Element %1 cannot have a sequence constructor.</source>
        <translation>元素%1不能有顺序构造。</translation>
    </message>
    <message>
        <source>When attribute %1 is present on %2, a sequence constructor cannot be used.</source>
        <translation>当属性%1出现在%2中时，不能使用顺序构造。</translation>
    </message>
    <message>
        <source>one or more</source>
        <translation>一或者更多</translation>
    </message>
    <message>
        <source>The encoding %1 is invalid. It must contain Latin characters only, must not contain whitespace, and must match the regular expression %2.</source>
        <translation>编码方式 %1 是无效的。它必须只包含拉丁字符，必须不包含空白符号，并且必须和正则表达式 %2 匹配。</translation>
    </message>
    <message numerus="yes">
        <source>%1 requires at least %n argument(s). %2 is therefore invalid.</source>
        <translation>
            <numerusform>%1 需要至少 %n 个参数。因此 %2 是无效的。</numerusform>
        </translation>
    </message>
    <message>
        <source>The target name in a processing instruction cannot be %1 in any combination of upper and lower case. Therefore, is %2 invalid.</source>
        <translation>一个处理指令中的目标名称不能是任何大小写混合的 %1。因此，%2 是无效的。</translation>
    </message>
    <message>
        <source>The focus is undefined.</source>
        <translation>焦点未定义。</translation>
    </message>
    <message>
        <source>%1 is an unknown schema type.</source>
        <translation>%1 是一个未知的方案类型。</translation>
    </message>
    <message>
        <source>The value for attribute %1 on element %2 must either be %3 or %4, not %5.</source>
        <translation>元素%2中属性%1的值必须是%3或者%4，而不是%5。</translation>
    </message>
    <message>
        <source>In the replacement string, %1 must be followed by at least one digit when not escaped.</source>
        <translation>在这个替换字符串中，%1 在没有被转义的时候必须被至少一个数字跟随。</translation>
    </message>
    <message>
        <source>In an XSL-T pattern, axis %1 cannot be used, only axis %2 or %3 can.</source>
        <translation>在XSL-T仰视中，不能使用%1轴，只能使用%2轴或者%3轴。</translation>
    </message>
    <message>
        <source>The namespace for a user defined function cannot be empty (try the predefined prefix %1 which exists for cases like this)</source>
        <translation>用户定义函数的名字空间不能为空（试用为这种情况而存在的预定义前缀%1）</translation>
    </message>
    <message>
        <source>The first operand in an integer division, %1, cannot be infinity (%2).</source>
        <translation>除法中的第一个操作数，%1，不能是无穷(%2)。</translation>
    </message>
    <message>
        <source>%1 is not a valid value of type %2.</source>
        <translation>%1 不是类型为 %2 的有效值。</translation>
    </message>
    <message>
        <source>Multiplication of a value of type %1 by %2 or %3 (plus or minus infinity) is not allowed.</source>
        <translation>一个类型为 %1 的值乘以 %2 或者 %3(正负无穷)是不允许的。</translation>
    </message>
    <message>
        <source>The variable %1 is unused</source>
        <translation>变量 %1 没有被使用</translation>
    </message>
    <message>
        <source>The %1-axis is unsupported in XQuery</source>
        <translation>这个 %1 轴在 XQuery 中是不被支持的。</translation>
    </message>
    <message>
        <source>A direct element constructor is not well-formed. %1 is ended with %2.</source>
        <translation>一个直接元素构造器没有很好地形成。%1 后面跟着 %2。</translation>
    </message>
    <message>
        <source>Dividing a value of type %1 by %2 or %3 (plus or minus zero) is not allowed.</source>
        <translation>一个类型为 %1 的值除以 %2 或者 %3(正负零)是不允许的。</translation>
    </message>
    <message>
        <source>Attribute %1 cannot have the value %2.</source>
        <translation>属性%1的值不能是%2。</translation>
    </message>
    <message>
        <source>It will not be possible to retrieve %1.</source>
        <translation>将不能获取 %1。</translation>
    </message>
    <message>
        <source>In an XSL-T pattern, function %1 cannot have a third argument.</source>
        <translation>在XSL-T样式中，函数%1不能有第三个参数。</translation>
    </message>
    <message>
        <source>The namespace URI in the name for a computed attribute cannot be %1.</source>
        <translation>一个被计算的属性的名称中的命名空间 URI 不能是 %1。</translation>
    </message>
    <message>
        <source>%1 is not a valid target name in a processing instruction. It must be a %2 value, e.g. %3.</source>
        <translation>%1 不是处理指令的有效目标名称。它必须是值 %2，例如 %3。</translation>
    </message>
    <message>
        <source>%1 is an complex type. Casting to complex types is not possible. However, casting to atomic types such as %2 works.</source>
        <translation>%1 是一个复杂类型。无法抛出到复杂类型。因此，抛出到例如 %2 这样的原子类型是可以的。</translation>
    </message>
    <message>
        <source>zero or one</source>
        <translation>零或者一</translation>
    </message>
    <message>
        <source>No operand in an integer division, %1, can be %2.</source>
        <translation>在整数除法中没有操作数，%1，可以是 %2。</translation>
    </message>
    <message>
        <source>The element with local name %1 does not exist in XSL-T.</source>
        <translation>有本地名称%1的元素在XSL-T中不存在。</translation>
    </message>
    <message>
        <source>Two namespace declaration attributes have the same name: %1.</source>
        <translation>两个命名空间声明属性使用了相同的名称：%1。</translation>
    </message>
    <message>
        <source>Effective Boolean Value cannot be calculated for a sequence containing two or more atomic values.</source>
        <translation>有效的布尔值(Effective Boolean Value)不能被用于计算一个包含两个或者更多原子值的序列。</translation>
    </message>
    <message>
        <source>%1 is an invalid %2</source>
        <translation>%1 是一个无效的 %2。</translation>
    </message>
    <message>
        <source>The first argument to %1 cannot be of type %2. It must be a numeric type, xs:yearMonthDuration or xs:dayTimeDuration.</source>
        <translation>%1 的第一个参数不能是类型 %2 的。它必须是数字类型的，xs:yearMonthDuration 或者 xs:dayTimeDuration。</translation>
    </message>
    <message>
        <source>Division (%1) by zero (%2) is undefined.</source>
        <translation>除法(%1)除零(%2)是未定义的。</translation>
    </message>
    <message>
        <source>No template by name %1 exists.</source>
        <translation>没有名为 %1 的模板存在。</translation>
    </message>
    <message>
        <source>The attribute %1 must appear on element %2.</source>
        <translation>属性%1必须出现在元素%2中。</translation>
    </message>
    <message>
        <source>An attribute by name %1 has already appeared on this element.</source>
        <translation>一个名称为 %1 的属性已经出现在这个元素中了。</translation>
    </message>
    <message>
        <source>The default collection is undefined</source>
        <translation>默认收集(collection)是未定义的</translation>
    </message>
    <message>
        <source>Only the prefix %1 can be bound to %2 and vice versa.</source>
        <translation>只有前缀%1可以绑定到%2，反之也一样</translation>
    </message>
    <message>
        <source>Value %1 of type %2 exceeds maximum (%3).</source>
        <translation>类型为 %2 的值 %1 超过了最大值(%3)。</translation>
    </message>
    <message>
        <source>Whitespace characters are removed, except when they appear in character classes</source>
        <translation>空白字符被移除了，除非当它们出现在字符类中</translation>
    </message>
    <message>
        <source>Casting to %1 is not possible because it is an abstract type, and can therefore never be instantiated.</source>
        <translation>无法抛出到 %1，因为它是一个抽象类型，并且因此无法被实例化。</translation>
    </message>
    <message>
        <source>Operator %1 cannot be used on type %2.</source>
        <translation>操作符 %1 不能被用于类型 %2。</translation>
    </message>
    <message>
        <source>The namespace %1 is reserved; therefore user defined functions may not use it. Try the predefined prefix %2, which exists for these cases.</source>
        <translation>命名空间 %1 是保留的；因此用户定义的函数不能使用它。请试试预定义的前缀 %2，它就是用于这种情况的。</translation>
    </message>
    <message>
        <source>The target namespace of a %1 cannot be empty.</source>
        <translation>%1 的目标命名空间不能为空。</translation>
    </message>
    <message>
        <source>%1 must be followed by %2 or %3, not at the end of the replacement string.</source>
        <translation>%1 必须被 %2 或者 %3 跟随，不能在替换字符串的末尾。</translation>
    </message>
    <message>
        <source>%1 is an invalid namespace URI.</source>
        <translation>%1 是一个无效的命名空间 URI。</translation>
    </message>
    <message>
        <source>The attribute %1 cannot appear on %2, when it is a child of %3.</source>
        <translation>属性%1不能出现在%2中，因为它是%3的子元素。</translation>
    </message>
    <message>
        <source>The attribute %1 can only appear on the first %2 element.</source>
        <translation>属性%1只能出现在前%2个元素中。</translation>
    </message>
    <message>
        <source>Element %1 must have either a %2-attribute or a sequence constructor.</source>
        <translation>元素%1必须有在一个%2属性或者顺序构造。</translation>
    </message>
    <message>
        <source>Module imports must occur before function, variable, and option declarations.</source>
        <translation>模块导入不能出现在函数、变量和选项声明之前。</translation>
    </message>
    <message>
        <source>Day %1 is outside the range %2..%3.</source>
        <translation>%1 日是在 %2...%3 范围之外的。</translation>
    </message>
    <message>
        <source>%1 contains octets which are disallowed in the requested encoding %2.</source>
        <translation>%1包含了在请求编码%2中不允许的八进位值。</translation>
    </message>
    <message>
        <source>When a parameter is required, a default value cannot be supplied through a %1-attribute or a sequence constructor.</source>
        <translation>当需要参数时，不能通过属性%1或者顺序构造提供默认值。</translation>
    </message>
    <message>
        <source>In an XSL-T pattern, the first argument to function %1 must be a string literal, when used for matching.</source>
        <translation>在XSL-T样式中，函数%1的第一个参数必须是字符串，以便用于匹配。</translation>
    </message>
    <message>
        <source>Text nodes are not allowed at this location.</source>
        <translation>文本节点不能在这个位置。</translation>
    </message>
    <message>
        <source>A value of type %1 cannot be a predicate. A predicate must have either a numeric type or an Effective Boolean Value type.</source>
        <translation>类型为 %1 的值不能被判断。一个判断必须是数值类型或者一个有效的布尔值(Effective Boolean Value)类型。</translation>
    </message>
    <message>
        <source>%1 is not a valid name for a processing-instruction.</source>
        <translation>%1不是一个处理指令的合法名称。</translation>
    </message>
    <message>
        <source>%1 was called.</source>
        <translation>%1 被调用了。</translation>
    </message>
    <message>
        <source>It&apos;s not possible to add attributes after any other kind of node.</source>
        <translation>不能在任何其它类型节点后添加属性。</translation>
    </message>
    <message>
        <source>At least one %1-element must occur before %2.</source>
        <translation>至少一个元素%1要出现在%2之前。</translation>
    </message>
    <message>
        <source>The normalization form %1 is unsupported. The supported forms are %2, %3, %4, and %5, and none, i.e. the empty string (no normalization).</source>
        <translation>不支持正规化(normalization)表单 %1。被支持的表单是 %2、%3、%4 和 %5，以及无，例如空字符串(无正规化)。</translation>
    </message>
    <message>
        <source>When casting to %1 or types derived from it, the source value must be of the same type, or it must be a string literal. Type %2 is not allowed.</source>
        <translation>当抛出到 %1 或者它的派生类时，源类型必须是同一类型，或者它必须是一个字符串类型。类型 %2 是不被允许的。</translation>
    </message>
    <message>
        <source>A parameter in a function cannot be declared to be a tunnel.</source>
        <translation>函数内的参数不能被声明为通道(tunnel)。</translation>
    </message>
    <message>
        <source>XSL-T attributes on XSL-T elements must be in the null namespace, not in the XSL-T namespace which %1 is.</source>
        <translation>XSL-T元素中的XSL-T属性必须放在空(null)命名空间中，而不是在XSL-T命名空间中，%1却是这个样子。</translation>
    </message>
    <message>
        <source>The namespace of a user defined function in a library module must be equivalent to the module namespace. In other words, it should be %1 instead of %2</source>
        <translation>用户在一个库模块中定义的函数的命名空间必须和这个模块的命名空间一致。也就是说，它应该是 %1，而不是 %2</translation>
    </message>
    <message>
        <source>Day %1 is invalid for month %2.</source>
        <translation>%1 日对于 %2 月是无效的。</translation>
    </message>
    <message>
        <source>Overflow: Can&apos;t represent date %1.</source>
        <translation>溢出：无法呈现数据 %1。</translation>
    </message>
    <message>
        <source>In a simplified stylesheet module, attribute %1 must be present.</source>
        <translation>在一个简化样式表模块中，属性%1必须存在。</translation>
    </message>
    <message>
        <source>Unknown XSL-T attribute %1.</source>
        <translation>未知的XSL-T属性%1。</translation>
    </message>
    <message>
        <source>It is not possible to redeclare prefix %1.</source>
        <translation>不能重复声明前缀 %1。</translation>
    </message>
    <message>
        <source>exactly one</source>
        <translation>确切地一</translation>
    </message>
    <message>
        <source>%1 is an invalid regular expression pattern: %2</source>
        <translation>%1 是正则表达式中的一个无效模式：%2</translation>
    </message>
    <message>
        <source>Element %1 is not allowed at this location.</source>
        <translation>元素%1不能在这个位置。</translation>
    </message>
    <message>
        <source>The Schema Validation Feature is not supported. Hence, %1-expressions may not be used.</source>
        <translation>不支持方案验证特性(Schema Validation Feature)。因此，也许不能使用 %1 表达式。</translation>
    </message>
    <message>
        <source>At least one %1 element must appear as child of %2.</source>
        <translation>%2必须至少又一个子元素%1。</translation>
    </message>
    <message>
        <source>This processor is not Schema-aware and therefore %1 cannot be used.</source>
        <translation>这个处理器不能感知Schema，因此%1不能被使用。</translation>
    </message>
    <message>
        <source>Attribute %1 cannot appear on the element %2. Allowed is %3, and the standard attributes.</source>
        <translation>属性%1不能出现在元素%2上。只有%3和标准属性是允许的。</translation>
    </message>
    <message>
        <source>Dividing a value of type %1 by %2 (not-a-number) is not allowed.</source>
        <translation>一个类型为 %1 的值除以 %2(不是一个数值)是不允许的。</translation>
    </message>
    <message>
        <source>Required cardinality is %1; got cardinality %2.</source>
        <translation>所需要的表间关系是 %1；得到的表间关系却是 %2。</translation>
    </message>
    <message>
        <source>A construct was encountered which only is allowed in XQuery.</source>
        <translation>遇到了一个只允许在XQuery中出现的构造。</translation>
    </message>
    <message>
        <source>No function by name %1 is available.</source>
        <translation>没有名称为 %1 的可用函数。</translation>
    </message>
    <message>
        <source>The URI cannot have a fragment</source>
        <translation>URI不能有片段</translation>
    </message>
    <message>
        <source>%1 is not an atomic type. Casting is only possible to atomic types.</source>
        <translation>%1 不是原子类型。只能抛出到原子类型。</translation>
    </message>
    <message>
        <source>The first argument to %1 cannot be of type %2.</source>
        <translation>%1 的第一个参数不能是类型 %2 的。</translation>
    </message>
    <message>
        <source>The namespace URI must be a constant and cannot use enclosed expressions.</source>
        <translation>命名空间 URI 必须是一个常量并且不能使用封闭的表达式。</translation>
    </message>
    <message>
        <source>Prefix %1 is already declared in the prolog.</source>
        <translation>前缀 %1 在序言中已经声明过了。</translation>
    </message>
    <message>
        <source>Ambiguous rule match.</source>
        <translation>含糊规则匹配。</translation>
    </message>
    <message>
        <source>Promoting %1 to %2 may cause loss of precision.</source>
        <translation>把 %1 升级为 %2 会导致精度的损失。</translation>
    </message>
    <message>
        <source>In an XSL-T pattern, only function %1 and %2, not %3, can be used for matching.</source>
        <translation>在XSL-T样式中，只用函数%1和%2可以用于匹配，%3不可以。</translation>
    </message>
    <message>
        <source>A default namespace declaration must occur before function, variable, and option declarations.</source>
        <translation>默认命名空间声明必须出现在函数、变量和选项声明之前。</translation>
    </message>
    <message>
        <source>Operator %1 cannot be used on atomic values of type %2 and %3.</source>
        <translation>操作符 %1 不能被用于类型为 %2 和 %3 的原子值。</translation>
    </message>
    <message>
        <source>The module import feature is not supported</source>
        <translation>不支持模块导入特性</translation>
    </message>
    <message>
        <source>The parameter %1 is passed, but no corresponding %2 exists.</source>
        <translation>参数%1已传递，但没有相应的%2存在。</translation>
    </message>
    <message>
        <source>A value of type %1 cannot have an Effective Boolean Value.</source>
        <translation>一个类型为 %1 的值不能是一个有效的布尔值(Effective Boolean Value)。</translation>
    </message>
    <message>
        <source>The data of a processing instruction cannot contain the string %1</source>
        <translation>处理指令的数据不能包含字符串 %1</translation>
    </message>
    <message>
        <source>Time 24:%1:%2.%3 is invalid. Hour is 24, but minutes, seconds, and milliseconds are not all 0; </source>
        <translation>时间 24:%1:%2.%3 是无效的。小时是 24，但是分钟、秒和毫秒不全为 0； </translation>
    </message>
    <message>
        <source>A template by name %1 has already been declared.</source>
        <translation>模板%1已被声明</translation>
    </message>
    <message>
        <source>It is not possible to bind to the prefix %1</source>
        <translation>无法绑定到这个前缀 %1。</translation>
    </message>
    <message>
        <source>Value %1 of type %2 is below minimum (%3).</source>
        <translation>类型为 %2 的值 %1 超过了最小值(%3)。</translation>
    </message>
    <message>
        <source>Required type is %1, but %2 was found.</source>
        <translation>需要的类型是 %1，但是找到的是 %2。</translation>
    </message>
    <message>
        <source>%1 is an unsupported encoding.</source>
        <translation> %1 是不被支持的编码。</translation>
    </message>
    <message>
        <source>The name of an option must have a prefix. There is no default namespace for options.</source>
        <translation>一个选项的名称必须带有前缀。对于选项没有默认命名空间。</translation>
    </message>
    <message>
        <source>Element %1 must come last.</source>
        <translation>元素%1必须最后出现。</translation>
    </message>
    <message>
        <source>Attribute %1 cannot appear on the element %2. Allowed is %3, %4, and the standard attributes.</source>
        <translation>属性%1不能出现在元素%2上。只有%3、%4和标准属性是允许的。</translation>
    </message>
    <message>
        <source>No namespace binding exists for the prefix %1 in %2</source>
        <translation>对于 %2 中的前缀 %1，没有存在绑定的命名空间。</translation>
    </message>
    <message>
        <source>The name %1 does not refer to any schema type.</source>
        <translation>名称 %1 没有指向任何方案类型。</translation>
    </message>
    <message>
        <source>Prefix %1 can only be bound to %2 (and it is, in either case, pre-declared).</source>
        <translation>前缀 %1 只能和 %2 绑定(并且如果是这种情况，需要提前声明)。</translation>
    </message>
    <message>
        <source>The initialization of variable %1 depends on itself</source>
        <translation>变量 %1 的初始化依赖于它本身</translation>
    </message>
    <message>
        <source>An attribute node cannot be a child of a document node. Therefore, the attribute %1 is out of place.</source>
        <translation>一个属性节点不能是一个文档节点的子节点。因此，这个属性 %1 所在位置是不合适的。</translation>
    </message>
    <message>
        <source>Month %1 is outside the range %2..%3.</source>
        <translation>%1 月是在 %2...%3 范围之外的。</translation>
    </message>
    <message>
        <source>The name of a variable bound in a for-expression must be different from the positional variable. Hence, the two variables named %1 collide.</source>
        <translation>一个在 for 表达式中绑定的变量的名称必须和这个定位变量不同。因此，这两个名称为 %1 的变量冲突。</translation>
    </message>
    <message>
        <source>No namespace binding exists for the prefix %1</source>
        <translation>对于前缀 %1，没有存在绑定的命名空间。</translation>
    </message>
    <message>
        <source>An %1-attribute with value %2 has already been declared.</source>
        <translation>带有值 %2 的 %1 属性已经声明过了。</translation>
    </message>
    <message>
        <source>%1 is not valid as a value of type %2.</source>
        <translation>%1 不是类型为 %2 的有效值。</translation>
    </message>
    <message>
        <source>zero or more</source>
        <translation>零或者更多</translation>
    </message>
    <message>
        <source>%1 is not in the in-scope attribute declarations. Note that the schema import feature is not supported.</source>
        <translation>%1 不是范围内属性声明。注意方案导入特性是不被支持的。</translation>
    </message>
    <message>
        <source>When function %1 is used for matching inside a pattern, the argument must be a variable reference or a string literal.</source>
        <translation>当函数%1被用于样式匹配时，参数必须是变量参考或者字符串。</translation>
    </message>
    <message>
        <source>%1 is an invalid template mode name.</source>
        <translation>%1不是一个合法的模板模式名称。</translation>
    </message>
    <message>
        <source>At least one time component must appear after the %1-delimiter.</source>
        <translation>至少一个时间组件必须出现在这个 %1 界限之后。</translation>
    </message>
    <message>
        <source>Overflow: Date can&apos;t be represented.</source>
        <translation>溢出：数据无法被呈现。</translation>
    </message>
    <message>
        <source>Operator %1 is not available between atomic values of type %2 and %3.</source>
        <translation>在类型 %2 和 %3 的原子值之间，操作符 %1 是不可用的。</translation>
    </message>
    <message>
        <source>A zone offset must be in the range %1..%2 inclusive. %3 is out of range.</source>
        <translation>区偏移(zone offset)必须在 %1...%2 范围之内。%3 是在范围之外的。</translation>
    </message>
    <message>
        <source>%1 is not a valid XML 1.0 character.</source>
        <translation>%1 不是一个有效的 XML 1.0 字符。</translation>
    </message>
    <message>
        <source>The first argument to %1 cannot be of type %2. It must be of type %3, %4, or %5.</source>
        <translation>%1 的第一个参数不能是类型 %2 的。它必须是类型 %3、%4 或者 %5 的。</translation>
    </message>
    <message>
        <source>%1 is not a whole number of minutes.</source>
        <translation>%1 不是分钟的整数。</translation>
    </message>
    <message>
        <source>Failure when casting from %1 to %2: %3</source>
        <translation>从 %2 抛出到 %1 失败：%3</translation>
    </message>
    <message>
        <source>It is not possible to cast from %1 to %2.</source>
        <translation>无法从 %1 抛出到 %2。</translation>
    </message>
    <message>
        <source>No variable by name %1 exists</source>
        <translation>没有名称为 %1 的变量存在。</translation>
    </message>
    <message>
        <source>Namespace %1 can only be bound to %2 (and it is, in either case, pre-declared).</source>
        <translation>命名空间 %1 只能和 %2 绑定(并且如果是这种情况，需要提前声明)。</translation>
    </message>
    <message>
        <source>The second operand in a division, %1, cannot be zero (%2).</source>
        <translation>除法中的第二个操作数，%1，不能是零(%2)。</translation>
    </message>
    <message>
        <source>Only one %1 declaration can occur in the query prolog.</source>
        <translation>只有一个 %1 的声明可以出现在查询序言中。</translation>
    </message>
    <message>
        <source>Element %1 must have at least one of the attributes %2 or %3.</source>
        <translation>元素%1必须至少有属性%2或者%3其中一个。</translation>
    </message>
    <message>
        <source>If both values have zone offsets, they must have the same zone offset. %1 and %2 are not the same.</source>
        <translation>如果两个值都有区偏移(zone offset)，它们必须拥有相同的区偏移。%1 和 %2 的区偏移是不同的。</translation>
    </message>
    <message>
        <source>No external functions are supported. All supported functions can be used directly, without first declaring them as external</source>
        <translation>不支持外部函数。所有支持的函数必须可以被直接使用，不能把它们声明为外部的</translation>
    </message>
    <message>
        <source>The last step in a path must contain either nodes or atomic values. It cannot be a mixture between the two.</source>
        <translation>一个路径中的最后一步必须包含节点或者原子值。它不能是两者的一个组合。</translation>
    </message>
</context>
<context>
    <name>QFontDialog</name>
    <message>
        <source>&amp;Font</source>
        <translation>字体(&amp;F)</translation>
    </message>
    <message>
        <source>&amp;Size</source>
        <translation>大小(&amp;S)</translation>
    </message>
    <message>
        <source>Sample</source>
        <translation>示例</translation>
    </message>
    <message>
        <source>Font st&amp;yle</source>
        <translation>字形(&amp;Y)</translation>
    </message>
    <message>
        <source>Wr&amp;iting System</source>
        <translation>书写系统(&amp;I)</translation>
    </message>
    <message>
        <source>Select Font</source>
        <translation>选择字体</translation>
    </message>
    <message>
        <source>&amp;Underline</source>
        <translation>下划线(&amp;U)</translation>
    </message>
    <message>
        <source>Effects</source>
        <translation>效果</translation>
    </message>
    <message>
        <source>Stri&amp;keout</source>
        <translation>删除线(&amp;K)</translation>
    </message>
</context>
<context>
    <name>Q3Wizard</name>
    <message>
        <source>&amp;Help</source>
        <translation>帮助(&amp;H)</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation>取消(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Finish</source>
        <translation>完成(&amp;F)</translation>
    </message>
    <message>
        <source>&amp;Next &gt;</source>
        <translation>下一步(&amp;N) &gt;</translation>
    </message>
    <message>
        <source>&lt; &amp;Back</source>
        <translation>&lt; 上一步(&amp;B)</translation>
    </message>
</context>
<context>
    <name>QWorkspace</name>
    <message>
        <source>&amp;Move</source>
        <translation>移动(&amp;M)</translation>
    </message>
    <message>
        <source>&amp;Size</source>
        <translation>大小(&amp;S)</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Minimize</source>
        <translation>最小化</translation>
    </message>
    <message>
        <source>Stay on &amp;Top</source>
        <translation>总在最前(&amp;T)</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation>关闭(&amp;C)</translation>
    </message>
    <message>
        <source>%1 - [%2]</source>
        <translation>%1 - [%2]</translation>
    </message>
    <message>
        <source>Sh&amp;ade</source>
        <translation>卷起(&amp;A)</translation>
    </message>
    <message>
        <source>&amp;Restore</source>
        <translation>恢复(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Unshade</source>
        <translation>展开(&amp;U)</translation>
    </message>
    <message>
        <source>Mi&amp;nimize</source>
        <translation>最小化(&amp;N)</translation>
    </message>
    <message>
        <source>Ma&amp;ximize</source>
        <translation>最大化(&amp;X)</translation>
    </message>
    <message>
        <source>Restore Down</source>
        <translation>恢复</translation>
    </message>
</context>
<context>
    <name>QColorDialog</name>
    <message>
        <source>&amp;Pick Screen Color</source>
        <translation>屏幕取色(&amp;P)</translation>
    </message>
    <message>
        <source>Cursor at %1, %2
Press ESC to cancel</source>
        <translation>光标位置: %1, %2
按 Esc 取消</translation>
    </message>
    <message>
        <source>&amp;Red:</source>
        <translation>红色(&amp;R)：</translation>
    </message>
    <message>
        <source>&amp;Sat:</source>
        <translation>饱和度(&amp;S)：</translation>
    </message>
    <message>
        <source>&amp;Val:</source>
        <translation>亮度(&amp;V)：</translation>
    </message>
    <message>
        <source>Hu&amp;e:</source>
        <translation>色调(&amp;E)：</translation>
    </message>
    <message>
        <source>Select Color</source>
        <translation>选择颜色</translation>
    </message>
    <message>
        <source>&amp;Add to Custom Colors</source>
        <translation>添加到自定义颜色(&amp;A)</translation>
    </message>
    <message>
        <source>Bl&amp;ue:</source>
        <translation>蓝色(&amp;U)：</translation>
    </message>
    <message>
        <source>&amp;Green:</source>
        <translation>绿色(&amp;G)：</translation>
    </message>
    <message>
        <source>&amp;Basic colors</source>
        <translation>基本颜色(&amp;B)</translation>
    </message>
    <message>
        <source>&amp;Custom colors</source>
        <translation>自定义颜色(&amp;C)</translation>
    </message>
    <message>
        <source>A&amp;lpha channel:</source>
        <translation>Alpha 通道(&amp;A)：</translation>
    </message>
</context>
<context>
    <name>QSharedMemory</name>
    <message>
        <source>%1: system-imposed size restrictions</source>
        <translation>%1：系统预设大小限制</translation>
    </message>
    <message>
        <source>%1: unix key file doesn&apos;t exists</source>
        <translation>%1：Unix 键文件不存在</translation>
    </message>
    <message>
        <source>%1: doesn&apos;t exists</source>
        <translation>%1：不存在</translation>
    </message>
    <message>
        <source>%1: key is empty</source>
        <translation>%1：键是空的</translation>
    </message>
    <message>
        <source>%1: key error</source>
        <translation>%1: 键错误</translation>
    </message>
    <message>
        <source>%1: create size is less then 0</source>
        <translation>%1：创建的大小小于 0</translation>
    </message>
    <message>
        <source>%1: already exists</source>
        <translation>%1：已经存在</translation>
    </message>
    <message>
        <source>%1: unknown error %2</source>
        <translation>%1：未知错误 %2</translation>
    </message>
    <message>
        <source>%1: invalid size</source>
        <translation>%1：无效大小</translation>
    </message>
    <message>
        <source>%1: unable to make key</source>
        <translation>%1：不能制造键</translation>
    </message>
    <message>
        <source>%1: unable to set key on lock</source>
        <translation>%1：无法设置锁定的键</translation>
    </message>
    <message>
        <source>%1: unable to unlock</source>
        <translation>%1：无法取消锁定</translation>
    </message>
    <message>
        <source>%1: permission denied</source>
        <translation>%1：权限被拒绝</translation>
    </message>
    <message>
        <source>%1: ftok failed</source>
        <translation>%1：ftok 失败</translation>
    </message>
    <message>
        <source>%1: out of resources</source>
        <translation>%1：资源耗尽了</translation>
    </message>
    <message>
        <source>%1: not attached</source>
        <translation>%1：没有附加</translation>
    </message>
    <message>
        <source>%1: size query failed</source>
        <translation>%1：大小查询失败</translation>
    </message>
    <message>
        <source>%1: unable to lock</source>
        <translation>%1：无法锁定</translation>
    </message>
</context>
<context>
    <name>QXmlStream</name>
    <message>
        <source>Reference to unparsed entity &apos;%1&apos;.</source>
        <translation>未解析实体“%1“的引用。</translation>
    </message>
    <message>
        <source>Unexpected character &apos;%1&apos; in public id literal.</source>
        <translation>在公有标识文本中有意外的字符”%1“。</translation>
    </message>
    <message>
        <source>Illegal namespace declaration.</source>
        <translation>非法的命名空间声明。</translation>
    </message>
    <message>
        <source>Invalid XML character.</source>
        <translation>无效的XML字符。</translation>
    </message>
    <message>
        <source>Expected character data.</source>
        <translation>期待的字符数据。</translation>
    </message>
    <message>
        <source>Standalone accepts only yes or no.</source>
        <translation>独立运行只允许是或者否。</translation>
    </message>
    <message>
        <source>Invalid XML version string.</source>
        <translation>无效的XML版本字符串。</translation>
    </message>
    <message>
        <source>Invalid processing instruction name.</source>
        <translation>无效的处理指令名称。</translation>
    </message>
    <message>
        <source>Namespace prefix &apos;%1&apos; not declared</source>
        <translation>命名空间的”%1“前缀没有被声明</translation>
    </message>
    <message>
        <source>Entity &apos;%1&apos; not declared.</source>
        <translation>实体”%1“没有被声明。</translation>
    </message>
    <message>
        <source>%1 is an invalid processing instruction name.</source>
        <translation>%1 是无效的处理指令名称。</translation>
    </message>
    <message>
        <source>The standalone pseudo attribute must appear after the encoding.</source>
        <translation>独立运行伪属性必须出现在编码之后。</translation>
    </message>
    <message>
        <source>Sequence &apos;]]&gt;&apos; not allowed in content.</source>
        <translation>内容中不允许有“]]&gt;“序列。</translation>
    </message>
    <message>
        <source>%1 is an invalid encoding name.</source>
        <translation>%1是无效的编码名称。</translation>
    </message>
    <message>
        <source>, but got &apos;</source>
        <translation>，但是得到的是“</translation>
    </message>
    <message>
        <source>Start tag expected.</source>
        <translation>开始期待的标记。</translation>
    </message>
    <message>
        <source>Invalid character reference.</source>
        <translation>无效的字符引用。</translation>
    </message>
    <message>
        <source>Reference to external entity &apos;%1&apos; in attribute value.</source>
        <translation>在属性值中的外部实体“%1”的引用。</translation>
    </message>
    <message>
        <source>Expected </source>
        <translation>期待的 </translation>
    </message>
    <message>
        <source>Invalid document.</source>
        <translation>无效的文档。</translation>
    </message>
    <message>
        <source>Opening and ending tag mismatch.</source>
        <translation>开始标记和结束标记不匹配。</translation>
    </message>
    <message>
        <source>Encountered incorrectly encoded content.</source>
        <translation>遇到不正确的编码内容。</translation>
    </message>
    <message>
        <source>Invalid attribute in XML declaration.</source>
        <translation>在XML声明中无效的属性。</translation>
    </message>
    <message>
        <source>Attribute redefined.</source>
        <translation>属性重复定义。</translation>
    </message>
    <message>
        <source>%1 is an invalid PUBLIC identifier.</source>
        <translation>%1是一个无效的公有(PUBLIC)标识符。</translation>
    </message>
    <message>
        <source>Extra content at end of document.</source>
        <translation>文档末尾有额外内容。</translation>
    </message>
    <message>
        <source>Invalid XML name.</source>
        <translation>无效的XML名称。</translation>
    </message>
    <message>
        <source>Premature end of document.</source>
        <translation>文档过早的结束。</translation>
    </message>
    <message>
        <source>XML declaration not at start of document.</source>
        <translation>XML声明没有在文档的开始位置。</translation>
    </message>
    <message>
        <source>Recursive entity detected.</source>
        <translation>检测到嵌套实体。</translation>
    </message>
    <message>
        <source>Unsupported XML version.</source>
        <translation>不被支持的XML版本。</translation>
    </message>
    <message>
        <source>Unexpected &apos;</source>
        <translation>意外的“</translation>
    </message>
    <message>
        <source>Invalid entity value.</source>
        <translation>无效的实体值。</translation>
    </message>
    <message>
        <source>Encoding %1 is unsupported</source>
        <translation>编码%1不被支持。</translation>
    </message>
    <message>
        <source>NDATA in parameter entity declaration.</source>
        <translation>在参数实体声明中有NDATA。</translation>
    </message>
</context>
<context>
    <name>QProcess</name>
    <message>
        <source>Error writing to process</source>
        <translation>向进程写入时发生错误</translation>
    </message>
    <message>
        <source>Resource error (fork failure): %1</source>
        <translation>资源错误(fork失败)：%1</translation>
    </message>
    <message>
        <source>Error reading from process</source>
        <translation>从进程中读取时发生错误</translation>
    </message>
    <message>
        <source>Process failed to start</source>
        <translation>启动进程失败</translation>
    </message>
    <message>
        <source>Could not open input redirection for reading</source>
        <translation>无法打开用于读取的输入重定向</translation>
    </message>
    <message>
        <source>Could not open output redirection for writing</source>
        <translation>无法打开用于写入的输出重定向</translation>
    </message>
    <message>
        <source>Process operation timed out</source>
        <translation>进程处理超时</translation>
    </message>
    <message>
        <source>Process crashed</source>
        <translation>进程已崩溃</translation>
    </message>
</context>
<context>
    <name>QNativeSocketEngine</name>
    <message>
        <source>The proxy type is invalid for this operation</source>
        <translation>对于这个操作代理类型是无效的。</translation>
    </message>
    <message>
        <source>Network operation timed out</source>
        <translation>网络操作超时</translation>
    </message>
    <message>
        <source>The remote host closed the connection</source>
        <translation>远端主机关闭了这个连接</translation>
    </message>
    <message>
        <source>Invalid socket descriptor</source>
        <translation>无效的套接字描述符</translation>
    </message>
    <message>
        <source>Host unreachable</source>
        <translation>主机不能访问</translation>
    </message>
    <message>
        <source>Protocol type not supported</source>
        <translation>协议类型不被支持</translation>
    </message>
    <message>
        <source>Datagram was too large to send</source>
        <translation>不能发送过大的数据报</translation>
    </message>
    <message>
        <source>Attempt to use IPv6 socket on a platform with no IPv6 support</source>
        <translation>试图在不支持IPv6支持的平台上使用IPv6套接字</translation>
    </message>
    <message>
        <source>Unable to receive a message</source>
        <translation>不能接收一个消息</translation>
    </message>
    <message>
        <source>Permission denied</source>
        <translation>权限被拒绝</translation>
    </message>
    <message>
        <source>Connection refused</source>
        <translation>连接被拒绝</translation>
    </message>
    <message>
        <source>Unable to write</source>
        <translation>不能写入</translation>
    </message>
    <message>
        <source>Another socket is already listening on the same port</source>
        <translation>另一个套接字已经正在监听同一端口</translation>
    </message>
    <message>
        <source>Unable to send a message</source>
        <translation>不能发送一个消息</translation>
    </message>
    <message>
        <source>The bound address is already in use</source>
        <translation>要启用的地址已经被使用</translation>
    </message>
    <message>
        <source>Connection timed out</source>
        <translation>连接超时</translation>
    </message>
    <message>
        <source>Network error</source>
        <translation>网络错误</translation>
    </message>
    <message>
        <source>Unsupported socket operation</source>
        <translation>不被支持的套接字操作</translation>
    </message>
    <message>
        <source>Operation on non-socket</source>
        <translation>对非套接字操作</translation>
    </message>
    <message>
        <source>Unable to initialize broadcast socket</source>
        <translation>不能初始化广播套接字</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>未知的错误</translation>
    </message>
    <message>
        <source>Unable to initialize non-blocking socket</source>
        <translation>不能初始化非阻塞套接字</translation>
    </message>
    <message>
        <source>The address is protected</source>
        <translation>这个地址被保护了</translation>
    </message>
    <message>
        <source>Network unreachable</source>
        <translation>网络不能访问</translation>
    </message>
    <message>
        <source>The address is not available</source>
        <translation>这个地址不可用</translation>
    </message>
    <message>
        <source>Out of resources</source>
        <translation>资源耗尽了</translation>
    </message>
</context>
<context>
    <name>QNetworkAccessFtpBackend</name>
    <message>
        <source>No suitable proxy found</source>
        <translation>未找到合适的代理</translation>
    </message>
    <message>
        <source>Error while downloading %1: %2</source>
        <translation>下载 %1 时错误：%2</translation>
    </message>
    <message>
        <source>Error while uploading %1: %2</source>
        <translation>上载 %1 时错误：%2</translation>
    </message>
    <message>
        <source>Cannot open %1: is a directory</source>
        <translation>无法读取 %1：是一个目录</translation>
    </message>
    <message>
        <source>Logging in to %1 failed: authentication required</source>
        <translation>登入 %1 失败：需要验证</translation>
    </message>
</context>
<context>
    <name>QNetworkAccessHttpBackend</name>
    <message>
        <source>No suitable proxy found</source>
        <translation>未找到合适的代理</translation>
    </message>
</context>
<context>
    <name>QCheckBox</name>
    <message>
        <source>Check</source>
        <translation>选中</translation>
    </message>
    <message>
        <source>Toggle</source>
        <translation>切换</translation>
    </message>
    <message>
        <source>Uncheck</source>
        <translation>取消选中</translation>
    </message>
</context>
<context>
    <name>QRadioButton</name>
    <message>
        <source>Check</source>
        <translation>选中</translation>
    </message>
</context>
<context>
    <name>Q3TitleBar</name>
    <message>
        <source>Close</source>
        <translation>关闭</translation>
    </message>
    <message>
        <source>Minimize</source>
        <translation>最小化</translation>
    </message>
    <message>
        <source>Puts a minimized back to normal</source>
        <translation>把一个最小化窗口恢复为普通状态</translation>
    </message>
    <message>
        <source>Displays the name of the window and contains controls to manipulate it</source>
        <translation>显示窗口名称并且包含维护它的控件</translation>
    </message>
    <message>
        <source>Makes the window full screen</source>
        <translation>窗口全屏化</translation>
    </message>
    <message>
        <source>System</source>
        <translation>系统</translation>
    </message>
    <message>
        <source>Maximize</source>
        <translation>最大化</translation>
    </message>
    <message>
        <source>Contains commands to manipulate the window</source>
        <translation>包含操作窗口的命令。</translation>
    </message>
    <message>
        <source>Restore up</source>
        <translation>向上恢复</translation>
    </message>
    <message>
        <source>Closes the window</source>
        <translation>关闭窗口</translation>
    </message>
    <message>
        <source>Puts a maximized window back to normal</source>
        <translation>把一个最大化窗口恢复为普通状态</translation>
    </message>
    <message>
        <source>Moves the window out of the way</source>
        <translation>把窗口移到外面</translation>
    </message>
    <message>
        <source>Restore down</source>
        <translation>向下恢复</translation>
    </message>
</context>
<context>
    <name>Phonon::</name>
    <message>
        <source>Games</source>
        <translation>游戏</translation>
    </message>
    <message>
        <source>Music</source>
        <translation>音乐</translation>
    </message>
    <message>
        <source>Video</source>
        <translation>视频</translation>
    </message>
    <message>
        <source>Communication</source>
        <translation>通讯</translation>
    </message>
    <message>
        <source>Accessibility</source>
        <translation>无障碍环境</translation>
    </message>
    <message>
        <source>Notifications</source>
        <translation>通知</translation>
    </message>
</context>
<context>
    <name>VolumeSlider</name>
    <message>
        <source>Muted</source>
        <translation>已静音</translation>
    </message>
    <message>
        <source>Volume: %1%</source>
        <translation>音量：%1%</translation>
    </message>
</context>
<context>
    <name>Q3LocalFs</name>
    <message>
        <source>Could not open
%1</source>
        <translation>不能打开
%1</translation>
    </message>
    <message>
        <source>Could not remove file or directory
%1</source>
        <translation>不能移除文件或者目录
%1</translation>
    </message>
    <message>
        <source>Could not create directory
%1</source>
        <translation>不能创建目录
%1</translation>
    </message>
    <message>
        <source>Could not read directory
%1</source>
        <translation>不能读取目录
%1</translation>
    </message>
    <message>
        <source>Could not rename
%1
to
%2</source>
        <translation>不能把
%1
重命名为
%2</translation>
    </message>
    <message>
        <source>Could not write
%1</source>
        <translation>不能写入
%1</translation>
    </message>
</context>
<context>
    <name>QDial</name>
    <message>
        <source>QDial</source>
        <translation>QDial</translation>
    </message>
    <message>
        <source>SliderHandle</source>
        <translation>SliderHandle</translation>
    </message>
    <message>
        <source>SpeedoMeter</source>
        <translation>SpeedoMeter</translation>
    </message>
</context>
<context>
    <name>QSocks5SocketEngine</name>
    <message>
        <source>Network operation timed out</source>
        <translation>网络操作超时</translation>
    </message>
    <message>
        <source>Connection to proxy closed prematurely</source>
        <translation>代理连接过早关闭</translation>
    </message>
    <message>
        <source>Proxy authentication failed: %1</source>
        <translation>代理认证失败: %1</translation>
    </message>
    <message>
        <source>Proxy authentication failed</source>
        <translation>代理认证失败</translation>
    </message>
    <message>
        <source>General SOCKSv5 server failure</source>
        <translation>常规服务器失败</translation>
    </message>
    <message>
        <source>Unknown SOCKSv5 proxy error code 0x%1</source>
        <translation>未知SOCKSv5代理，错误代码 0x%1</translation>
    </message>
    <message>
        <source>Connection not allowed by SOCKSv5 server</source>
        <translation>连接不被SOCKSv5服务器允许</translation>
    </message>
    <message>
        <source>SOCKSv5 command not supported</source>
        <translation>不支持的SOCKSv5命令</translation>
    </message>
    <message>
        <source>Connection to proxy timed out</source>
        <translation>代理连接超时</translation>
    </message>
    <message>
        <source>Proxy host not found</source>
        <translation>代理主机未找到</translation>
    </message>
    <message>
        <source>TTL expired</source>
        <translation>TTL已过期</translation>
    </message>
    <message>
        <source>Address type not supported</source>
        <translation>不支持的地址类型</translation>
    </message>
    <message>
        <source>Connection to proxy refused</source>
        <translation>代理拒绝连接</translation>
    </message>
    <message>
        <source>SOCKS version 5 protocol error</source>
        <translation>SOCKS版本5协议错误</translation>
    </message>
</context>
<context>
    <name>QWhatsThisAction</name>
    <message>
        <source>What&apos;s This?</source>
        <translation>这是什么？</translation>
    </message>
</context>
<context>
    <name>Q3UrlOperator</name>
    <message>
        <source>The protocol `%1&apos; does not support getting files</source>
        <translation>协议“%1”不支持获取文件</translation>
    </message>
    <message>
        <source>The protocol `%1&apos; does not support renaming files or directories</source>
        <translation>协议“%1”不支持重命名文件或者目录</translation>
    </message>
    <message>
        <source>The protocol `%1&apos; does not support listing directories</source>
        <translation>协议“%1”不支持列出目录</translation>
    </message>
    <message>
        <source>(unknown)</source>
        <translation>(未知的)</translation>
    </message>
    <message>
        <source>The protocol `%1&apos; does not support removing files or directories</source>
        <translation>协议“%1”不支持移除文件或者目录</translation>
    </message>
    <message>
        <source>The protocol `%1&apos; does not support putting files</source>
        <translation>协议“%1”不支持上传文件</translation>
    </message>
    <message>
        <source>The protocol `%1&apos; is not supported</source>
        <translation>协议“%1”不被支持</translation>
    </message>
    <message>
        <source>The protocol `%1&apos; does not support copying or moving files or directories</source>
        <translation>协议“%1”不支持复制或者移动文件或者目录</translation>
    </message>
    <message>
        <source>The protocol `%1&apos; does not support creating new directories</source>
        <translation>协议“%1”不支持创建新目录</translation>
    </message>
</context>
<context>
    <name>QFtp</name>
    <message>
        <source>Listing directory failed:
%1</source>
        <translation>列出目录失败：
%1</translation>
    </message>
    <message>
        <source>Creating directory failed:
%1</source>
        <translation>创建目录失败：
%1</translation>
    </message>
    <message>
        <source>Not connected</source>
        <translation>没有连接</translation>
    </message>
    <message>
        <source>Connection refused for data connection</source>
        <translation>因为数据连接而被拒绝连接</translation>
    </message>
    <message>
        <source>Login failed:
%1</source>
        <translation>登录失败：
%1</translation>
    </message>
    <message>
        <source>Downloading file failed:
%1</source>
        <translation>下载文件失败：
%1</translation>
    </message>
    <message>
        <source>Connected to host</source>
        <translation>连接到主机了</translation>
    </message>
    <message>
        <source>Connection timed out to host %1</source>
        <translation>主机%1连接超时</translation>
    </message>
    <message>
        <source>Connected to host %1</source>
        <translation>连接到主机%1了</translation>
    </message>
    <message>
        <source>Connecting to host failed:
%1</source>
        <translation>连接主机失败：
%1</translation>
    </message>
    <message>
        <source>Host %1 not found</source>
        <translation>主机%1没有找到</translation>
    </message>
    <message>
        <source>Uploading file failed:
%1</source>
        <translation>上传文件失败：
%1</translation>
    </message>
    <message>
        <source>Changing directory failed:
%1</source>
        <translation>改变目录失败：
%1</translation>
    </message>
    <message>
        <source>Host found</source>
        <translation>主机找到了</translation>
    </message>
    <message>
        <source>Removing directory failed:
%1</source>
        <translation>移除目录失败：
%1</translation>
    </message>
    <message>
        <source>Connection refused to host %1</source>
        <translation>连接被主机 %1 拒绝</translation>
    </message>
    <message>
        <source>Connection to %1 closed</source>
        <translation>到%1的连接关闭了</translation>
    </message>
    <message>
        <source>Removing file failed:
%1</source>
        <translation>移除文件失败：
%1</translation>
    </message>
    <message>
        <source>Host %1 found</source>
        <translation>主机%1找到了</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>未知的错误</translation>
    </message>
    <message>
        <source>Connection closed</source>
        <translation>连接关闭了</translation>
    </message>
</context>
<context>
    <name>QDB2Driver</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>不能提交事务</translation>
    </message>
    <message>
        <source>Unable to set autocommit</source>
        <translation>不能设置自动提交</translation>
    </message>
    <message>
        <source>Unable to connect</source>
        <translation>不能连接</translation>
    </message>
    <message>
        <source>Unable to rollback transaction</source>
        <translation>不能回滚事务</translation>
    </message>
</context>
<context>
    <name>QIBaseDriver</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>不能提交事务</translation>
    </message>
    <message>
        <source>Could not start transaction</source>
        <translation>不能开始事务</translation>
    </message>
    <message>
        <source>Error opening database</source>
        <translation>打开数据库错误</translation>
    </message>
    <message>
        <source>Unable to rollback transaction</source>
        <translation>不能回滚事务</translation>
    </message>
</context>
<context>
    <name>QIBaseResult</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>不能提交事务</translation>
    </message>
    <message>
        <source>Unable to open BLOB</source>
        <translation>不能打开BLOB</translation>
    </message>
    <message>
        <source>Could not describe statement</source>
        <translation>不能描述语句</translation>
    </message>
    <message>
        <source>Could not describe input statement</source>
        <translation>不能描述输入语句</translation>
    </message>
    <message>
        <source>Could not allocate statement</source>
        <translation>不能分配语句</translation>
    </message>
    <message>
        <source>Unable to write BLOB</source>
        <translation>不能写入BLOB</translation>
    </message>
    <message>
        <source>Could not start transaction</source>
        <translation>不能开始事务</translation>
    </message>
    <message>
        <source>Unable to close statement</source>
        <translation>不能关闭语句</translation>
    </message>
    <message>
        <source>Could not get query info</source>
        <translation>不能得到查询信息</translation>
    </message>
    <message>
        <source>Could not find array</source>
        <translation>不能找到数组</translation>
    </message>
    <message>
        <source>Could not get array data</source>
        <translation>不能得到数组数据</translation>
    </message>
    <message>
        <source>Unable to execute query</source>
        <translation>不能执行查询</translation>
    </message>
    <message>
        <source>Could not prepare statement</source>
        <translation>不能准备语句</translation>
    </message>
    <message>
        <source>Could not fetch next item</source>
        <translation>不能获取下一项</translation>
    </message>
    <message>
        <source>Could not get statement info</source>
        <translation>不能得到语句信息</translation>
    </message>
    <message>
        <source>Unable to create BLOB</source>
        <translation>不能创建BLOB</translation>
    </message>
    <message>
        <source>Unable to read BLOB</source>
        <translation>不能读取BLOB</translation>
    </message>
</context>
<context>
    <name>QMYSQLDriver</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>不能提交事务</translation>
    </message>
    <message>
        <source>Unable to open database &apos;</source>
        <translation>不能打开数据库</translation>
    </message>
    <message>
        <source>Unable to connect</source>
        <translation>不能连接</translation>
    </message>
    <message>
        <source>Unable to rollback transaction</source>
        <translation>不能回滚事务</translation>
    </message>
    <message>
        <source>Unable to begin transaction</source>
        <translation>不能开始事务</translation>
    </message>
</context>
<context>
    <name>QOCIDriver</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>不能提交事务</translation>
    </message>
    <message>
        <source>Unable to initialize</source>
        <translation>不能初始化</translation>
    </message>
    <message>
        <source>Unable to logon</source>
        <translation>不能登录</translation>
    </message>
    <message>
        <source>Unable to rollback transaction</source>
        <translation>不能回滚事务</translation>
    </message>
    <message>
        <source>Unable to begin transaction</source>
        <translation>不能开始事务</translation>
    </message>
</context>
<context>
    <name>QODBCDriver</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>不能提交事务</translation>
    </message>
    <message>
        <source>Unable to enable autocommit</source>
        <translation>不能打开自动提交</translation>
    </message>
    <message>
        <source>Unable to connect - Driver doesn&apos;t support all needed functionality</source>
        <translation>不能连接—驱动程序不支持所有功能</translation>
    </message>
    <message>
        <source>Unable to disable autocommit</source>
        <translation>不能禁止自动提交</translation>
    </message>
    <message>
        <source>Unable to connect</source>
        <translation>不能连接</translation>
    </message>
    <message>
        <source>Unable to rollback transaction</source>
        <translation>不能回滚事务</translation>
    </message>
</context>
<context>
    <name>QSQLite2Driver</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>不能提交事务</translation>
    </message>
    <message>
        <source>Error to open database</source>
        <translation>打开数据库错误</translation>
    </message>
    <message>
        <source>Unable to rollback Transaction</source>
        <translation>不能回滚事务</translation>
    </message>
    <message>
        <source>Unable to begin transaction</source>
        <translation>不能开始事务</translation>
    </message>
</context>
<context>
    <name>QSQLiteDriver</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>不能提交事务</translation>
    </message>
    <message>
        <source>Error closing database</source>
        <translation>关闭数据库错误</translation>
    </message>
    <message>
        <source>Error opening database</source>
        <translation>打开数据库错误</translation>
    </message>
    <message>
        <source>Unable to rollback transaction</source>
        <translation>不能回滚事务</translation>
    </message>
    <message>
        <source>Unable to begin transaction</source>
        <translation>不能开始事务</translation>
    </message>
</context>
<context>
    <name>QAbstractSocket</name>
    <message>
        <source>Host not found</source>
        <translation>主机未找到</translation>
    </message>
    <message>
        <source>Connection refused</source>
        <translation>连接被拒绝</translation>
    </message>
    <message>
        <source>Connection timed out</source>
        <translation>连接超时</translation>
    </message>
    <message>
        <source>Socket is not connected</source>
        <translation>套接字没有被连接</translation>
    </message>
    <message>
        <source>Socket operation timed out</source>
        <translation>套接字操作超时</translation>
    </message>
    <message>
        <source>Network unreachable</source>
        <translation>网络不能访问</translation>
    </message>
    <message>
        <source>Operation on socket is not supported</source>
        <translation>Socket操作不被支持</translation>
    </message>
</context>
<context>
    <name>QHostInfoAgent</name>
    <message>
        <source>Host not found</source>
        <translation>主机未找到</translation>
    </message>
    <message>
        <source>Unknown address type</source>
        <translation>未知的地址类型</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>未知的错误</translation>
    </message>
</context>
<context>
    <name>Phonon::Gstreamer::MediaObject</name>
    <message>
        <source>Could not open media source.</source>
        <translation>不能打开媒体源。</translation>
    </message>
    <message>
        <source>Could not decode media source.</source>
        <translation>不能解码媒体源。</translation>
    </message>
    <message>
        <source>Invalid source type.</source>
        <translation>无效的源类型。</translation>
    </message>
    <message>
        <source>Cannot start playback.

Check your Gstreamer installation and make sure you
have libgstreamer-plugins-base installed.</source>
        <translation>不能开始回放。

请检查您的 Gstreamer 安装并且确认您
已经安装 libgstreamer-plugins-base。</translation>
    </message>
    <message>
        <source>Could not open audio device. The device is already in use.</source>
        <translation>不能打开音频设备。这个设备正在被使用。</translation>
    </message>
    <message>
        <source>A required codec is missing. You need to install the following codec(s) to play this content: %0</source>
        <translation>缺少一个需要的解码器。您需要安装如下解码器来播放这个内容：%0</translation>
    </message>
    <message>
        <source>Could not locate media source.</source>
        <translation>不能定位媒体源。</translation>
    </message>
</context>
<context>
    <name>QLibrary</name>
    <message>
        <source>Could not unmap &apos;%1&apos;: %2</source>
        <translation>不能取消映射“%1“：%2</translation>
    </message>
    <message>
        <source>Cannot unload library %1: %2</source>
        <translation>无法卸载库%1：%2</translation>
    </message>
    <message>
        <source>Cannot load library %1: %2</source>
        <translation>无法加载库%1：%2</translation>
    </message>
    <message>
        <source>The plugin &apos;%1&apos; uses incompatible Qt library. (%2.%3.%4) [%5]</source>
        <translation>插件“%1”使用了不兼容的Qt库。(%2.%3.%4) [%5]</translation>
    </message>
    <message>
        <source>Cannot resolve symbol &quot;%1&quot; in %2: %3</source>
        <translation>无法解析%2中的符号“%2”：%3</translation>
    </message>
    <message>
        <source>Plugin verification data mismatch in &apos;%1&apos;</source>
        <translation>“%1“中的插件验证数据不匹配</translation>
    </message>
    <message>
        <source>The plugin &apos;%1&apos; uses incompatible Qt library. (Cannot mix debug and release libraries.)</source>
        <translation>插件“%1“使用了不兼容的Qt库。(不能混合使用库的调试版本和发布版本。)</translation>
    </message>
    <message>
        <source>The file &apos;%1&apos; is not a valid Qt plugin.</source>
        <translation>文件“%1“不是有效的Qt插件。</translation>
    </message>
    <message>
        <source>The shared library was not found.</source>
        <translation>共享库没有被找到。</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>未知的错误</translation>
    </message>
    <message>
        <source>The plugin &apos;%1&apos; uses incompatible Qt library. Expected build key &quot;%2&quot;, got &quot;%3&quot;</source>
        <translation>插件“%1“使用了不兼容的Qt库。期待的构建键是“%2“，得到的却是”%3“</translation>
    </message>
    <message>
        <source>Could not mmap &apos;%1&apos;: %2</source>
        <translation>不能映射”%1“：%2</translation>
    </message>
</context>
<context>
    <name>QHttp</name>
    <message>
        <source>Connection refused (or timed out)</source>
        <translation>连接被拒绝(或者超时)</translation>
    </message>
    <message>
        <source>Data corrupted</source>
        <translation>数据错误</translation>
    </message>
    <message>
        <source>Connected to host</source>
        <translation>连接到主机了</translation>
    </message>
    <message>
        <source>Connected to host %1</source>
        <translation>连接到%1主机了</translation>
    </message>
    <message>
        <source>Host %1 not found</source>
        <translation>主机%1没有找到</translation>
    </message>
    <message>
        <source>Host requires authentication</source>
        <translation>主机需要验证</translation>
    </message>
    <message>
        <source>Error writing response to device</source>
        <translation>向设备中进行写回复时发生错误</translation>
    </message>
    <message>
        <source>HTTPS connection requested but SSL support not compiled in</source>
        <translation>HTTPS 连接需要 SSL，但它没有被编译进来</translation>
    </message>
    <message>
        <source>Host found</source>
        <translation>主机找到了</translation>
    </message>
    <message>
        <source>Connection refused</source>
        <translation>连接被拒绝</translation>
    </message>
    <message>
        <source>Proxy authentication required</source>
        <translation>代理需要认证</translation>
    </message>
    <message>
        <source>Unknown protocol specified</source>
        <translation>所指定的协议是未知的</translation>
    </message>
    <message>
        <source>HTTP request failed</source>
        <translation>HTTP请求失败</translation>
    </message>
    <message>
        <source>Proxy requires authentication</source>
        <translation>代理需要验证</translation>
    </message>
    <message>
        <source>Authentication required</source>
        <translation>需要认证</translation>
    </message>
    <message>
        <source>SSL handshake failed</source>
        <translation>SSL 握手失败</translation>
    </message>
    <message>
        <source>Connection to %1 closed</source>
        <translation>到%1的连接关闭了</translation>
    </message>
    <message>
        <source>Invalid HTTP chunked body</source>
        <translation>无效的HTTP臃肿体</translation>
    </message>
    <message>
        <source>Host %1 found</source>
        <translation>主机%1找到了</translation>
    </message>
    <message>
        <source>Wrong content length</source>
        <translation>错误的内容长度</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>未知的错误</translation>
    </message>
    <message>
        <source>Invalid HTTP response header</source>
        <translation>无效的HTTP响应头</translation>
    </message>
    <message>
        <source>Connection closed</source>
        <translation>连接关闭了</translation>
    </message>
    <message>
        <source>No server set to connect to</source>
        <translation>没有设置要连接的服务器</translation>
    </message>
    <message>
        <source>Server closed connection unexpectedly</source>
        <translation>服务器异常地关闭了连接</translation>
    </message>
    <message>
        <source>Request aborted</source>
        <translation>请求被放弃了</translation>
    </message>
</context>
<context>
    <name>QXml</name>
    <message>
        <source>unparsed entity reference in wrong context</source>
        <translation>没有解析的错误上下文中的实体参考</translation>
    </message>
    <message>
        <source>external parsed general entity reference not allowed in DTD</source>
        <translation>在DTD中不允许使用外部解析的通用实体参考</translation>
    </message>
    <message>
        <source>wrong value for standalone declaration</source>
        <translation>错误的独立声明的值</translation>
    </message>
    <message>
        <source>encoding declaration or standalone declaration expected while reading the XML declaration</source>
        <translation>在读取XML声明的时候，编码声明或者独立声明被期待</translation>
    </message>
    <message>
        <source>no error occurred</source>
        <translation>没有错误发生</translation>
    </message>
    <message>
        <source>error occurred while parsing reference</source>
        <translation>在解析参考的时候发生错误</translation>
    </message>
    <message>
        <source>standalone declaration expected while reading the XML declaration</source>
        <translation>在读取XML声明的时候，独立声明被期待</translation>
    </message>
    <message>
        <source>invalid name for processing instruction</source>
        <translation>无效的处理指令名称</translation>
    </message>
    <message>
        <source>error triggered by consumer</source>
        <translation>由消费者出发的错误</translation>
    </message>
    <message>
        <source>error occurred while parsing element</source>
        <translation>在解析元素的时候发生错误</translation>
    </message>
    <message>
        <source>unexpected character</source>
        <translation>意外的字符</translation>
    </message>
    <message>
        <source>tag mismatch</source>
        <translation>标记不匹配</translation>
    </message>
    <message>
        <source>error occurred while parsing content</source>
        <translation>在解析内容的时候发生错误</translation>
    </message>
    <message>
        <source>error occurred while parsing comment</source>
        <translation>在解析注释的时候发生错误</translation>
    </message>
    <message>
        <source>internal general entity reference not allowed in DTD</source>
        <translation>在DTD中不允许使用内部解析的通用实体参考</translation>
    </message>
    <message>
        <source>recursive entities</source>
        <translation>嵌套实体</translation>
    </message>
    <message>
        <source>more than one document type definition</source>
        <translation>多于一个的文档类型定义</translation>
    </message>
    <message>
        <source>version expected while reading the XML declaration</source>
        <translation>在读取XML声明的时候，版本被期待</translation>
    </message>
    <message>
        <source>letter is expected</source>
        <translation>字符被期待</translation>
    </message>
    <message>
        <source>unexpected end of file</source>
        <translation>意外的文件终止</translation>
    </message>
    <message>
        <source>external parsed general entity reference not allowed in attribute value</source>
        <translation>在属性值中不允许使用外部解析的通用实体参考</translation>
    </message>
    <message>
        <source>error in the text declaration of an external entity</source>
        <translation>在一个外部实体的文本声明里有错误</translation>
    </message>
    <message>
        <source>error occurred while parsing document type definition</source>
        <translation>在解析文档类型定义的时候发生错误</translation>
    </message>
</context>
<context>
    <name>QSystemSemaphore</name>
    <message>
        <source>%1: does not exist</source>
        <translation>%1：不存在</translation>
    </message>
    <message>
        <source>%1: already exists</source>
        <translation>%1：已经存在</translation>
    </message>
    <message>
        <source>%1: unknown error %2</source>
        <translation>%1：未知错误 %2</translation>
    </message>
    <message>
        <source>%1: permission denied</source>
        <translation>%1：权限被拒绝</translation>
    </message>
    <message>
        <source>%1: out of resources</source>
        <translation>%1：资源耗尽了</translation>
    </message>
</context>
<context>
    <name>QSQLiteResult</name>
    <message>
        <source>Unable to fetch row</source>
        <translation>不能获取行</translation>
    </message>
    <message>
        <source>No query</source>
        <translation>没有查询</translation>
    </message>
    <message>
        <source>Unable to execute statement</source>
        <translation>不能执行语句</translation>
    </message>
    <message>
        <source>Unable to bind parameters</source>
        <translation>不能绑定参数</translation>
    </message>
    <message>
        <source>Unable to reset statement</source>
        <translation>不能重置语句</translation>
    </message>
    <message>
        <source>Parameter count mismatch</source>
        <translation>参数数量不匹配</translation>
    </message>
</context>
<context>
    <name>QApplication</name>
    <message>
        <source>Activates the program&apos;s main window</source>
        <translation>激活这个程序的主窗口</translation>
    </message>
    <message>
        <source>Activate</source>
        <translation>激活</translation>
    </message>
    <message>
        <source>Executable &apos;%1&apos; requires Qt %2, found Qt %3.</source>
        <translation>执行“%1”需要Qt %2，只找到了Qt %3。</translation>
    </message>
    <message>
        <source>Incompatible Qt Library Error</source>
        <translation>不兼容的Qt错误</translation>
    </message>
</context>
<context>
    <name>QUnicodeControlCharacterMenu</name>
    <message>
        <source>RLE Start of right-to-left embedding</source>
        <translation>RLE 开始从右向左嵌入</translation>
    </message>
    <message>
        <source>ZWSP Zero width space</source>
        <translation>ZWSP 零宽度空格</translation>
    </message>
    <message>
        <source>Insert Unicode control character</source>
        <translation>插入Unicode控制字符</translation>
    </message>
    <message>
        <source>LRO Start of left-to-right override</source>
        <translation>LRO 开始从左向右覆盖</translation>
    </message>
    <message>
        <source>LRE Start of left-to-right embedding</source>
        <translation>LRE 开始从左到右嵌入</translation>
    </message>
    <message>
        <source>RLM Right-to-left mark</source>
        <translation>RLM 从右向左标记</translation>
    </message>
    <message>
        <source>PDF Pop directional formatting</source>
        <translation>PDF 弹出方向格式</translation>
    </message>
    <message>
        <source>ZWNJ Zero width non-joiner</source>
        <translation>ZWNJ 零宽度非连接器</translation>
    </message>
    <message>
        <source>RLO Start of right-to-left override</source>
        <translation>RLO 开始从右向左覆盖</translation>
    </message>
    <message>
        <source>ZWJ Zero width joiner</source>
        <translation>ZWJ 零宽度连接器</translation>
    </message>
    <message>
        <source>LRM Left-to-right mark</source>
        <translation>LRM 从左到右标记</translation>
    </message>
</context>
<context>
    <name>QWebFrame</name>
    <message>
        <source>Request blocked</source>
        <translation>请求被阻塞了</translation>
    </message>
    <message>
        <source>Request cancelled</source>
        <translation>请求被取消了</translation>
    </message>
    <message>
        <source>Cannot show URL</source>
        <translation>无法显示 URL</translation>
    </message>
    <message>
        <source>Frame load interruped by policy change</source>
        <translation>因为策略调整打断了桢的加载</translation>
    </message>
    <message>
        <source>File does not exist</source>
        <translation>文件不存在</translation>
    </message>
    <message>
        <source>Cannot show mimetype</source>
        <translation>无法显示 MIMETYPE</translation>
    </message>
</context>
<context>
    <name>QRegExp</name>
    <message>
        <source>bad lookahead syntax</source>
        <translation>错误的预测语法</translation>
    </message>
    <message>
        <source>no error occurred</source>
        <translation>没有错误发生</translation>
    </message>
    <message>
        <source>missing left delim</source>
        <translation>找不到左分隔符</translation>
    </message>
    <message>
        <source>bad char class syntax</source>
        <translation>错误的字符类语法</translation>
    </message>
    <message>
        <source>disabled feature used</source>
        <translation>使用了失效的特效</translation>
    </message>
    <message>
        <source>invalid octal value</source>
        <translation>无效的八进制数值</translation>
    </message>
    <message>
        <source>bad repetition syntax</source>
        <translation>错误的重复语法</translation>
    </message>
    <message>
        <source>met internal limit</source>
        <translation>遇到内部限制</translation>
    </message>
    <message>
        <source>unexpected end</source>
        <translation>意外的终止</translation>
    </message>
</context>
<context>
    <name>QHttpSocketEngine</name>
    <message>
        <source>Proxy connection refused</source>
        <translation>代理连接被拒绝</translation>
    </message>
    <message>
        <source>Proxy denied connection</source>
        <translation>代理拒绝连接</translation>
    </message>
    <message>
        <source>Proxy server not found</source>
        <translation>未找到代理服务器</translation>
    </message>
    <message>
        <source>Proxy server connection timed out</source>
        <translation>代理服务器连接超时</translation>
    </message>
    <message>
        <source>Did not receive HTTP response from proxy</source>
        <translation>未收到代理的HTTP响应</translation>
    </message>
    <message>
        <source>Proxy connection closed prematurely</source>
        <translation>代理连接过早关闭</translation>
    </message>
    <message>
        <source>Error communicating with HTTP proxy</source>
        <translation>和HTTP代理通讯时发生错误</translation>
    </message>
    <message>
        <source>Authentication required</source>
        <translation>需要认证</translation>
    </message>
    <message>
        <source>Error parsing authentication request from proxy</source>
        <translation>解析代理的认证请求出错</translation>
    </message>
</context>
<context>
    <name>QOCIResult</name>
    <message>
        <source>Unable to alloc statement</source>
        <translation>不能分配语句</translation>
    </message>
    <message>
        <source>Unable to goto next</source>
        <translation>不能进入下一个</translation>
    </message>
    <message>
        <source>Unable to execute statement</source>
        <translation>不能执行语句</translation>
    </message>
    <message>
        <source>Unable to bind column for batch execute</source>
        <translation>不能绑定批处理执行的列</translation>
    </message>
    <message>
        <source>Unable to prepare statement</source>
        <translation>不能准备语句</translation>
    </message>
    <message>
        <source>Unable to execute batch statement</source>
        <translation>不能执行批处理语句</translation>
    </message>
    <message>
        <source>Unable to bind value</source>
        <translation>不能绑定值</translation>
    </message>
</context>
<context>
    <name>QNetworkReply</name>
    <message>
        <source>Error downloading %1 - server replied: %2</source>
        <translation>下载 %1 错误 - 服务器回复：%2</translation>
    </message>
    <message>
        <source>Protocol &quot;%1&quot; is unknown</source>
        <translation>协议“%1”是未知的</translation>
    </message>
</context>
<context>
    <name>QAbstractSpinBox</name>
    <message>
        <source>Step &amp;down</source>
        <translation>减少(&amp;D)</translation>
    </message>
    <message>
        <source>&amp;Step up</source>
        <translation>增加(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Select All</source>
        <translation>选择全部(&amp;S)</translation>
    </message>
</context>
<context>
    <name>QDB2Result</name>
    <message>
        <source>Unable to bind variable</source>
        <translation>不能帮定变量</translation>
    </message>
    <message>
        <source>Unable to execute statement</source>
        <translation>不能执行语句</translation>
    </message>
    <message>
        <source>Unable to fetch next</source>
        <translation>不能获取下一个</translation>
    </message>
    <message>
        <source>Unable to prepare statement</source>
        <translation>不能准备语句</translation>
    </message>
    <message>
        <source>Unable to fetch record %1</source>
        <translation>不能获取记录%1</translation>
    </message>
    <message>
        <source>Unable to fetch first</source>
        <translation>不能获取第一个</translation>
    </message>
</context>
<context>
    <name>QODBCResult</name>
    <message>
        <source>Unable to bind variable</source>
        <translation>不能帮定变量</translation>
    </message>
    <message>
        <source>Unable to execute statement</source>
        <translation>不能执行语句</translation>
    </message>
    <message>
        <source>Unable to fetch next</source>
        <translation>不能获取下一个</translation>
    </message>
    <message>
        <source>Unable to fetch last</source>
        <translation>不能获取最后一个</translation>
    </message>
    <message>
        <source>Unable to prepare statement</source>
        <translation>不能准备语句</translation>
    </message>
    <message>
        <source>Unable to fetch previous</source>
        <translation>不能获取上一个</translation>
    </message>
    <message>
        <source>Unable to fetch</source>
        <translation>不能获取</translation>
    </message>
    <message>
        <source>QODBCResult::reset: Unable to set &apos;SQL_CURSOR_STATIC&apos; as statement attribute. Please check your ODBC driver configuration</source>
        <translation>QODBCResult::reset: 不能把“SQL_CURSOR_STATIC”设置为语句属性。请检查你的ODBC驱动程序设置。</translation>
    </message>
    <message>
        <source>Unable to fetch first</source>
        <translation>不能获取第一个</translation>
    </message>
</context>
<context>
    <name>QPSQLDriver</name>
    <message>
        <source>Unable to subscribe</source>
        <translation>不能订阅</translation>
    </message>
    <message>
        <source>Could not begin transaction</source>
        <translation>不能开始事务</translation>
    </message>
    <message>
        <source>Could not rollback transaction</source>
        <translation>不能回滚事务</translation>
    </message>
    <message>
        <source>Could not commit transaction</source>
        <translation>不能提交事务</translation>
    </message>
    <message>
        <source>Unable to connect</source>
        <translation>不能连接</translation>
    </message>
    <message>
        <source>Unable to unsubscribe</source>
        <translation>不能取消订阅</translation>
    </message>
</context>
<context>
    <name>QInputDialog</name>
    <message>
        <source>Enter a value:</source>
        <translation>输入一个值：</translation>
    </message>
</context>
<context>
    <name>QCoreApplication</name>
    <message>
        <source>%1: key is empty</source>
        <translation>%1：键是空的</translation>
    </message>
    <message>
        <source>%1: unable to make key</source>
        <translation>%1：不能制造键</translation>
    </message>
    <message>
        <source>%1: ftok failed</source>
        <translation>%1：ftok 失败</translation>
    </message>
</context>
<context>
    <name>QIODevice</name>
    <message>
        <source>No such file or directory</source>
        <translation>没有这个文件或者目录</translation>
    </message>
    <message>
        <source>Permission denied</source>
        <translation>权限被拒绝</translation>
    </message>
    <message>
        <source>No space left on device</source>
        <translation>设备上没有空间了</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>未知的错误</translation>
    </message>
    <message>
        <source>Too many open files</source>
        <translation>太多打开的文件</translation>
    </message>
</context>
<context>
    <name>QMultiInputContext</name>
    <message>
        <source>Select IM</source>
        <translation>选择输入法</translation>
    </message>
</context>
<context>
    <name>QTabBar</name>
    <message>
        <source>Scroll Left</source>
        <translation>向左滚动</translation>
    </message>
    <message>
        <source>Scroll Right</source>
        <translation>向右滚动</translation>
    </message>
</context>
<context>
    <name>QUndoModel</name>
    <message>
        <source>&lt;empty&gt;</source>
        <translation>&lt;空白&gt;</translation>
    </message>
</context>
<context>
    <name>QNetworkAccessCacheBackend</name>
    <message>
        <source>Error opening %1</source>
        <translation>打开%1发生错误</translation>
    </message>
</context>
<context>
    <name>QMYSQLResult</name>
    <message>
        <source>Unable to execute statement</source>
        <translation>不能执行语句</translation>
    </message>
    <message>
        <source>Unable to store statement results</source>
        <translation>不能存储语句结果</translation>
    </message>
    <message>
        <source>Unable to execute next query</source>
        <translation>不能执行下一个查询</translation>
    </message>
    <message>
        <source>Unable to bind outvalues</source>
        <translation>不能绑定外值</translation>
    </message>
    <message>
        <source>Unable to store next result</source>
        <translation>不能存储下一个结果</translation>
    </message>
    <message>
        <source>Unable to fetch data</source>
        <translation>不能获取数据</translation>
    </message>
    <message>
        <source>Unable to prepare statement</source>
        <translation>不能准备语句</translation>
    </message>
    <message>
        <source>Unable to store result</source>
        <translation>不能存储结果</translation>
    </message>
    <message>
        <source>Unable to bind value</source>
        <translation>不能绑定值</translation>
    </message>
    <message>
        <source>Unable to execute query</source>
        <translation>不能执行查询</translation>
    </message>
    <message>
        <source>Unable to reset statement</source>
        <translation>不能重置语句</translation>
    </message>
</context>
<context>
    <name>QSQLite2Result</name>
    <message>
        <source>Unable to execute statement</source>
        <translation>不能执行语句</translation>
    </message>
    <message>
        <source>Unable to fetch results</source>
        <translation>不能获取结果</translation>
    </message>
</context>
<context>
    <name>Q3MainWindow</name>
    <message>
        <source>Line up</source>
        <translation>排列</translation>
    </message>
    <message>
        <source>Customize...</source>
        <translation>自定义...</translation>
    </message>
</context>
<context>
    <name>QUdpSocket</name>
    <message>
        <source>This platform does not support IPv6</source>
        <translation>这个平台不支持IPv6</translation>
    </message>
</context>
<context>
    <name>Phonon::Gstreamer::Backend</name>
    <message>
        <source>Warning: You do not seem to have the base GStreamer plugins installed.
          All audio and video support has been disabled</source>
        <translation>警告：看起来，您没有安装基础的 GStreamer 插件。
    所有的音频和视频支持都已经被关闭。</translation>
    </message>
    <message>
        <source>Warning: You do not seem to have the package gstreamer0.10-plugins-good installed.
          Some video features have been disabled.</source>
        <translation>警告：看起来，您没有安装 gstreamer0.10-plugins-good 包。
    一些视频特性已经被关闭。</translation>
    </message>
</context>
<context>
    <name>QLocalServer</name>
    <message>
        <source>%1: Name error</source>
        <translation>%1: 名称错误</translation>
    </message>
    <message>
        <source>%1: Unknown error %2</source>
        <translation>%1：未知错误 %2</translation>
    </message>
    <message>
        <source>%1: Permission denied</source>
        <translation>%1：权限被拒绝</translation>
    </message>
    <message>
        <source>%1: Address in use</source>
        <translation>%1：地址正在被使用</translation>
    </message>
</context>
<context>
    <name>Phonon::VolumeSlider</name>
    <message>
        <source>Volume: %1%</source>
        <translation>音量：%1%</translation>
    </message>
    <message>
        <source>Use this slider to adjust the volume. The leftmost position is 0%, the rightmost is %1%</source>
        <translation>请使用这个滑块调节音量。最左为%0，最右为%1%</translation>
    </message>
</context>
<context>
    <name>Q3ToolBar</name>
    <message>
        <source>More...</source>
        <translation>更多...</translation>
    </message>
</context>
<context>
    <name>QMultiInputContextPlugin</name>
    <message>
        <source>Multiple input method switcher that uses the context menu of the text widgets</source>
        <translation>使用文本窗口部件上下文菜单的多输入法切换器</translation>
    </message>
    <message>
        <source>Multiple input method switcher</source>
        <translation>多输入法切换器</translation>
    </message>
</context>
<context>
    <name>QGuiApplication</name>
    <message>
        <source>QT_LAYOUT_DIRECTION</source>
        <translation>LTR</translation>
    </message>
</context>
<context>
    <name>Q3ProgressDialog</name>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
</context>
<context>
    <name>QProgressDialog</name>
    <message>
        <source>Cancel</source>
        <translation>撤消</translation>
    </message>
</context>
<context>
    <name>QFile</name>
    <message>
        <source>Cannot create %1 for output</source>
        <translation>无法创建 %1 </translation>
    </message>
    <message>
        <source>Failure to write block</source>
        <translation>写块失败</translation>
    </message>
    <message>
        <source>Cannot open %1 for input</source>
        <translation>无法输入 %1 </translation>
    </message>
    <message>
        <source>Destination file exists</source>
        <translation>目标文件已存在</translation>
    </message>
    <message>
        <source>Cannot open for output</source>
        <translation>无法输出</translation>
    </message>
</context>
<context>
    <name>MAC_APPLICATION_MENU</name>
    <message>
        <source>Hide Others</source>
        <translation>隐藏其他</translation>
    </message>
    <message>
        <source>Quit %1</source>
        <translation>退出 %1</translation>
    </message>
    <message>
        <source>About %1</source>
        <translation>关于 %1</translation>
    </message>
    <message>
        <source>Preferences...</source>
        <translation>偏好设置…</translation>
    </message>
    <message>
        <source>Services</source>
        <translation>服务</translation>
    </message>
    <message>
        <source>Hide %1</source>
        <translation>隐藏%1</translation>
    </message>
    <message>
        <source>Show All</source>
        <translation>全部显示</translation>
    </message>
</context>
<context>
    <name>QTDSDriver</name>
    <message>
        <source>Unable to open connection</source>
        <translation>不能打开连接</translation>
    </message>
    <message>
        <source>Unable to use database</source>
        <translation>不能使用数据库</translation>
    </message>
</context>
<context>
    <name>AudioOutput</name>
    <message>
        <source>&lt;html&gt;The audio playback device &lt;b&gt;%1&lt;/b&gt; does not work.&lt;br/&gt;Falling back to &lt;b&gt;%2&lt;/b&gt;.&lt;/html&gt;</source>
        <translation>&lt;html&gt;音频回放设备 &lt;b&gt;%1&lt;/b&gt; 没有工作。&lt;br/&gt;回滚到 &lt;b&gt;%2&lt;/b&gt;。&lt;/html&gt;</translation>
    </message>
    <message>
        <source>Revert back to device &apos;%1&apos;</source>
        <translation>恢复到设备“%1”</translation>
    </message>
    <message>
        <source>&lt;html&gt;Switching to the audio playback device &lt;b&gt;%1&lt;/b&gt;&lt;br/&gt;which just became available and has higher preference.&lt;/html&gt;</source>
        <translation>&lt;html&gt;切换到音频回放设备 &lt;b&gt;%1&lt;/b&gt;，&lt;br/&gt;它刚刚变为可用并且具有更高的优先级。&lt;/html&gt;</translation>
    </message>
</context>
<context>
    <name>QPluginLoader</name>
    <message>
        <source>The plugin was not loaded.</source>
        <translation>插件没有被载入。</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>未知的错误</translation>
    </message>
</context>
<context>
    <name>QSlider</name>
    <message>
        <source>Page up</source>
        <translation>上一页</translation>
    </message>
    <message>
        <source>Position</source>
        <translation>位置</translation>
    </message>
    <message>
        <source>Page right</source>
        <translation>右一页</translation>
    </message>
    <message>
        <source>Page down</source>
        <translation>下一页</translation>
    </message>
    <message>
        <source>Page left</source>
        <translation>左一页</translation>
    </message>
</context>
<context>
    <name>CloseButton</name>
    <message>
        <source>Close Tab</source>
        <translation>关闭标签页</translation>
    </message>
</context>
<context>
    <name>QPSQLResult</name>
    <message>
        <source>Unable to prepare statement</source>
        <translation>不能准备语句</translation>
    </message>
    <message>
        <source>Unable to create query</source>
        <translation>不能创建查询</translation>
    </message>
</context>
<context>
    <name>QNetworkAccessFileBackend</name>
    <message>
        <source>Request for opening non-local file %1</source>
        <translation>正在打开非本地文件 %1 的请求</translation>
    </message>
    <message>
        <source>Read error reading from %1: %2</source>
        <translation>读取 %1 错误：%2</translation>
    </message>
    <message>
        <source>Cannot open %1: Path is a directory</source>
        <translation>无法打开 %1：路径是一个目录</translation>
    </message>
    <message>
        <source>Error opening %1: %2</source>
        <translation>打开 %1 错误：%2</translation>
    </message>
    <message>
        <source>Write error writing to %1: %2</source>
        <translation>写入 %1 错误：%2</translation>
    </message>
</context>
<context>
    <name>QNetworkReplyImpl</name>
    <message>
        <source>Operation canceled</source>
        <translation>操作被取消</translation>
    </message>
</context>
<context>
    <name>Q3NetworkProtocol</name>
    <message>
        <source>Operation stopped by the user</source>
        <translation>操作被用户停止</translation>
    </message>
</context>
<context>
    <name>QMdiArea</name>
    <message>
        <source>(Untitled)</source>
        <translation>(未命名的)</translation>
    </message>
</context>
<context>
    <name>QHostInfo</name>
    <message>
        <source>Unknown error</source>
        <translation>未知的错误</translation>
    </message>
</context>
<context>
    <name>Q3Accel</name>
    <message>
        <source>%1, %2 not defined</source>
        <translation>%1，%2未定义</translation>
    </message>
    <message>
        <source>Ambiguous %1 not handled</source>
        <translation>不明确的%1没有被处理</translation>
    </message>
</context>
<context>
    <name>QTcpServer</name>
    <message>
        <source>Operation on socket is not supported</source>
        <translation>socket操作不被支持</translation>
    </message>
</context>
</TS>