Skip to content

Preserve phase relationship when waveform updated #7192

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Closed
wants to merge 8 commits into from
Closed

Preserve phase relationship when waveform updated #7192

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
8 commits
Select commit Hold shift + click to select a range
37d9fce
Preserve phase relationship when waveform updated
earlephilhower Apr 4, 2020
6450989
Allow clock-cycle granularity for analogWrite
earlephilhower Apr 4, 2020
e75da87
Actually use the Cycles not the US call in analogWrite
earlephilhower Apr 4, 2020
6fc6b80
Use InterruptLock and not manual locking
earlephilhower Apr 5, 2020
393cc85
Fix potential race condition when Tone() updating
earlephilhower Apr 5, 2020
4b2562a
Adjust to a lockfree cycle update logic
earlephilhower Apr 6, 2020
545fa10
Move waveform vars to a struct to save IRAM
earlephilhower Apr 6, 2020
371ef22
Favor phase over duty cycle
earlephilhower Apr 7, 2020
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
126 changes: 77 additions & 49 deletions cores/esp8266/core_esp8266_waveform.cpp
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -38,7 +38,7 @@
*/

#include <Arduino.h>
#include "ets_sys.h"
#include "interrupts.h"
#include "core_esp8266_waveform.h"

extern "C" {
Expand All @@ -54,20 +54,34 @@ extern "C" {
typedef struct {
uint32_t nextServiceCycle; // ESP cycle timer when a transition required
uint32_t expiryCycle; // For time-limited waveform, the cycle when this waveform must stop
uint32_t nextTimeHighCycles; // Copy over low->high to keep smooth waveform
uint32_t nextTimeLowCycles; // Copy over high->low to keep smooth waveform
uint32_t timeHighCycles; // Currently running waveform period
uint32_t timeLowCycles; //
uint32_t gotoTimeHighCycles; // Copied over on the next period to preserve phase
uint32_t gotoTimeLowCycles; //
} Waveform;

static Waveform waveform[17]; // State of all possible pins
static volatile uint32_t waveformState = 0; // Is the pin high or low, updated in NMI so no access outside the NMI code
static volatile uint32_t waveformEnabled = 0; // Is it actively running, updated in NMI so no access outside the NMI code

// Enable lock-free by only allowing updates to waveformState and waveformEnabled from IRQ service routine
static volatile uint32_t waveformToEnable = 0; // Message to the NMI handler to start a waveform on a inactive pin
static volatile uint32_t waveformToDisable = 0; // Message to the NMI handler to disable a pin from waveform generation
static struct WaveformState {
volatile uint32_t waveformState = 0; // Is the pin high or low, updated in NMI so no access outside the NMI code
volatile uint32_t waveformEnabled = 0; // Is it actively running, updated in NMI so no access outside the NMI code

static uint32_t (*timer1CB)() = NULL;
// Enable lock-free by only allowing updates to waveformState and waveformEnabled from IRQ service routine
volatile uint32_t waveformToEnable = 0; // Message to the NMI handler to start a waveform on a inactive pin
volatile uint32_t waveformToDisable = 0; // Message to the NMI handler to disable a pin from waveform generation

volatile int32_t waveformToChange = -1;
volatile uint32_t waveformNewHigh = 0;
volatile uint32_t waveformNewLow = 0;

uint32_t (*timer1CB)() = NULL;

// Optimize the NMI inner loop by keeping track of the min and max GPIO that we
// are generating. In the common case (1 PWM) these may be the same pin and
// we can avoid looking at the other pins.
int startPin = 0;
int endPin = 0;
} state;

// Non-speed critical bits
#pragma GCC optimize ("Os")
Expand Down Expand Up @@ -99,11 +113,11 @@ static void ICACHE_RAM_ATTR deinitTimer() {

// Set a callback. Pass in NULL to stop it
void setTimer1Callback(uint32_t (*fn)()) {
timer1CB = fn;
state.timer1CB = fn;
if (!timerRunning && fn) {
initTimer();
timer1_write(microsecondsToClockCycles(1)); // Cause an interrupt post-haste
} else if (timerRunning && !fn && !waveformEnabled) {
} else if (timerRunning && !fn && !state.waveformEnabled) {
deinitTimer();
}
}
Expand All @@ -112,23 +126,36 @@ void setTimer1Callback(uint32_t (*fn)()) {
// waveform smoothly on next low->high transition. For immediate change, stopWaveform()
// first, then it will immediately begin.
int startWaveform(uint8_t pin, uint32_t timeHighUS, uint32_t timeLowUS, uint32_t runTimeUS) {
return startWaveformCycles(pin, microsecondsToClockCycles(timeHighUS), microsecondsToClockCycles(timeLowUS), microsecondsToClockCycles(runTimeUS));
}

int startWaveformCycles(uint8_t pin, uint32_t timeHighCycles, uint32_t timeLowCycles, uint32_t runTimeCycles) {
if ((pin > 16) || isFlashInterfacePin(pin)) {
return false;
}
Waveform *wave = &waveform[pin];
// Adjust to shave off some of the IRQ time, approximately
wave->nextTimeHighCycles = microsecondsToClockCycles(timeHighUS);
wave->nextTimeLowCycles = microsecondsToClockCycles(timeLowUS);
wave->expiryCycle = runTimeUS ? GetCycleCount() + microsecondsToClockCycles(runTimeUS) : 0;
if (runTimeUS && !wave->expiryCycle) {

wave->expiryCycle = runTimeCycles ? GetCycleCount() + runTimeCycles : 0;
if (runTimeCycles && !wave->expiryCycle) {
wave->expiryCycle = 1; // expiryCycle==0 means no timeout, so avoid setting it
}

uint32_t mask = 1<<pin;
if (!(waveformEnabled & mask)) {
if (state.waveformEnabled & mask) {
state.waveformNewHigh = timeHighCycles;
state.waveformNewLow = timeLowCycles;
state.waveformToChange = pin;
while (state.waveformToChange >= 0) {
delay(0); // Wait for waveform to update
}
} else { // if (!(state.waveformEnabled & mask))
wave->timeHighCycles = timeHighCycles;
wave->timeLowCycles = timeLowCycles;
wave->gotoTimeHighCycles = wave->timeHighCycles;
wave->gotoTimeLowCycles = wave->timeLowCycles;
// Actually set the pin high or low in the IRQ service to guarantee times
wave->nextServiceCycle = GetCycleCount() + microsecondsToClockCycles(1);
waveformToEnable |= mask;
state.waveformToEnable |= mask;
if (!timerRunning) {
initTimer();
timer1_write(microsecondsToClockCycles(10));
Expand All @@ -138,7 +165,7 @@ int startWaveform(uint8_t pin, uint32_t timeHighUS, uint32_t timeLowUS, uint32_t
timer1_write(microsecondsToClockCycles(10));
}
}
while (waveformToEnable) {
while (state.waveformToEnable) {
delay(0); // Wait for waveform to update
}
}
Expand Down Expand Up @@ -174,18 +201,18 @@ int ICACHE_RAM_ATTR stopWaveform(uint8_t pin) {
// If user sends in a pin >16 but <32, this will always point to a 0 bit
// If they send >=32, then the shift will result in 0 and it will also return false
uint32_t mask = 1<<pin;
if (!(waveformEnabled & mask)) {
if (!(state.waveformEnabled & mask)) {
return false; // It's not running, nothing to do here
}
waveformToDisable |= mask;
state.waveformToDisable |= mask;
// Ensure timely service....
if (T1L > microsecondsToClockCycles(10)) {
timer1_write(microsecondsToClockCycles(10));
}
while (waveformToDisable) {
while (state.waveformToDisable) {
/* no-op */ // Can't delay() since stopWaveform may be called from an IRQ
}
if (!waveformEnabled && !timer1CB) {
if (!state.waveformEnabled && !state.timer1CB) {
deinitTimer();
}
return true;
Expand All @@ -202,36 +229,34 @@ int ICACHE_RAM_ATTR stopWaveform(uint8_t pin) {


static ICACHE_RAM_ATTR void timer1Interrupt() {
// Optimize the NMI inner loop by keeping track of the min and max GPIO that we
// are generating. In the common case (1 PWM) these may be the same pin and
// we can avoid looking at the other pins.
static int startPin = 0;
static int endPin = 0;

uint32_t nextEventCycles = microsecondsToClockCycles(MAXIRQUS);
uint32_t timeoutCycle = GetCycleCountIRQ() + microsecondsToClockCycles(14);

if (waveformToEnable || waveformToDisable) {
if (state.waveformToChange >=0) {
waveform[state.waveformToChange].gotoTimeHighCycles = state.waveformNewHigh;
waveform[state.waveformToChange].gotoTimeLowCycles = state.waveformNewLow;
state.waveformToChange = -1;
} else if (state.waveformToEnable || state.waveformToDisable) {
// Handle enable/disable requests from main app.
waveformEnabled = (waveformEnabled & ~waveformToDisable) | waveformToEnable; // Set the requested waveforms on/off
waveformState &= ~waveformToEnable; // And clear the state of any just started
waveformToEnable = 0;
waveformToDisable = 0;
state.waveformEnabled = (state.waveformEnabled & ~state.waveformToDisable) | state.waveformToEnable; // Set the requested waveforms on/off
state.waveformState &= ~state.waveformToEnable; // And clear the state of any just started
state.waveformToEnable = 0;
state.waveformToDisable = 0;
// Find the first GPIO being generated by checking GCC's find-first-set (returns 1 + the bit of the first 1 in an int32_t)
startPin = __builtin_ffs(waveformEnabled) - 1;
state.startPin = __builtin_ffs(state.waveformEnabled) - 1;
// Find the last bit by subtracting off GCC's count-leading-zeros (no offset in this one)
endPin = 32 - __builtin_clz(waveformEnabled);
state.endPin = 32 - __builtin_clz(state.waveformEnabled);
}

bool done = false;
if (waveformEnabled) {
if (state.waveformEnabled) {
do {
nextEventCycles = microsecondsToClockCycles(MAXIRQUS);
for (int i = startPin; i <= endPin; i++) {
for (int i = state.startPin; i <= state.endPin; i++) {
uint32_t mask = 1<<i;

// If it's not on, ignore!
if (!(waveformEnabled & mask)) {
if (!(state.waveformEnabled & mask)) {
continue;
}

Expand All @@ -243,7 +268,7 @@ static ICACHE_RAM_ATTR void timer1Interrupt() {
int32_t expiryToGo = wave->expiryCycle - now;
if (expiryToGo < 0) {
// Done, remove!
waveformEnabled &= ~mask;
state.waveformEnabled &= ~mask;
if (i == 16) {
GP16O &= ~1;
} else {
Expand All @@ -256,23 +281,26 @@ static ICACHE_RAM_ATTR void timer1Interrupt() {
// Check for toggles
int32_t cyclesToGo = wave->nextServiceCycle - now;
if (cyclesToGo < 0) {
waveformState ^= mask;
if (waveformState & mask) {
state.waveformState ^= mask;
if (state.waveformState & mask) {
if (i == 16) {
GP16O |= 1; // GPIO16 write slow as it's RMW
} else {
SetGPIO(mask);
}
wave->nextServiceCycle = now + wave->nextTimeHighCycles;
nextEventCycles = min_u32(nextEventCycles, wave->nextTimeHighCycles);
wave->nextServiceCycle += wave->timeHighCycles;
nextEventCycles = min_u32(nextEventCycles, wave->timeHighCycles);
} else {
if (i == 16) {
GP16O &= ~1; // GPIO16 write slow as it's RMW
} else {
ClearGPIO(mask);
}
wave->nextServiceCycle = now + wave->nextTimeLowCycles;
nextEventCycles = min_u32(nextEventCycles, wave->nextTimeLowCycles);
wave->nextServiceCycle += wave->timeLowCycles;
nextEventCycles = min_u32(nextEventCycles, wave->timeLowCycles);
// Copy over next full-cycle timings
wave->timeHighCycles = wave->gotoTimeHighCycles;
wave->timeLowCycles = wave->gotoTimeLowCycles;
}
} else {
uint32_t deltaCycles = wave->nextServiceCycle - now;
Expand All @@ -286,10 +314,10 @@ static ICACHE_RAM_ATTR void timer1Interrupt() {
int32_t cyclesLeftTimeout = timeoutCycle - now;
done = (cycleDeltaNextEvent < 0) || (cyclesLeftTimeout < 0);
} while (!done);
} // if (waveformEnabled)
} // if (state.waveformEnabled)

if (timer1CB) {
nextEventCycles = min_u32(nextEventCycles, timer1CB());
if (state.timer1CB) {
nextEventCycles = min_u32(nextEventCycles, state.timer1CB());
}

if (nextEventCycles < microsecondsToClockCycles(10)) {
Expand Down
2 changes: 2 additions & 0 deletions cores/esp8266/core_esp8266_waveform.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -50,6 +50,8 @@ extern "C" {
// If runtimeUS > 0 then automatically stop it after that many usecs.
// Returns true or false on success or failure.
int startWaveform(uint8_t pin, uint32_t timeHighUS, uint32_t timeLowUS, uint32_t runTimeUS);
// Same as above, but pass in CPU clock cycles instead of microseconds
int startWaveformCycles(uint8_t pin, uint32_t timeHighCycles, uint32_t timeLowCycles, uint32_t runTimeCycles);
// Stop a waveform, if any, on the specified pin.
// Returns true or false on success or failure.
int stopWaveform(uint8_t pin);
Expand Down
5 changes: 3 additions & 2 deletions cores/esp8266/core_esp8266_wiring_pwm.cpp
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -25,6 +25,7 @@
#include "core_esp8266_waveform.h"

extern "C" {
#include "user_interface.h"

static uint32_t analogMap = 0;
static int32_t analogScale = PWMRANGE;
Expand All @@ -50,7 +51,7 @@ extern void __analogWrite(uint8_t pin, int val) {
if (pin > 16) {
return;
}
uint32_t analogPeriod = 1000000L / analogFreq;
uint32_t analogPeriod = (1000000L * system_get_cpu_freq()) / analogFreq;
if (val < 0) {
val = 0;
} else if (val > analogScale) {
Expand All @@ -68,7 +69,7 @@ extern void __analogWrite(uint8_t pin, int val) {
stopWaveform(pin);
digitalWrite(pin, LOW);
} else {
if (startWaveform(pin, high, low, 0)) {
if (startWaveformCycles(pin, high, low, 0)) {
analogMap |= (1 << pin);
}
}
Expand Down