fix(): Codespell issues

Author: P-R-O-C-H-Y

libraries/Zigbee/examples/Zigbee_Color_Dimmable_Light/Zigbee_Color_Dimmable_Light.ino

@@ -86,7 +86,7 @@ void setup() {
 }
 
 void loop() {
-  // Cheking button for factory reset
+  // Checking button for factory reset
   if (digitalRead(BUTTON_PIN) == LOW) {  // Push button pressed
     // Key debounce handling
     delay(100);
@@ -95,7 +95,7 @@ void loop() {
       delay(50);
       if ((millis() - startTime) > 3000) {
         // If key pressed for more than 3secs, factory reset Zigbee and reboot
-        Serial.printf("Reseting Zigbee to factory settings, reboot.\n");
+        Serial.printf("Resetting Zigbee to factory settings, reboot.\n");
         Zigbee.factoryReset();
       }
     }

libraries/Zigbee/examples/Zigbee_Color_Dimmer_Switch/Zigbee_Color_Dimmer_Switch.ino

@@ -90,7 +90,7 @@ void loop() {
     // Toggle light
     zbSwitch.lightToggle();
   }
-  // Handle serial input to controll color and level of the light
+  // Handle serial input to control color and level of the light
   if (Serial.available()) {
     String command = Serial.readString();
 

libraries/Zigbee/examples/Zigbee_On_Off_Light/Zigbee_On_Off_Light.ino

@@ -69,7 +69,7 @@ void setup() {
 }
 
 void loop() {
-  // Cheking button for factory reset
+  // Checking button for factory reset
   if (digitalRead(BUTTON_PIN) == LOW) {  // Push button pressed
     // Key debounce handling
     delay(100);
@@ -78,7 +78,7 @@ void loop() {
       delay(50);
       if ((millis() - startTime) > 3000) {
         // If key pressed for more than 3secs, factory reset Zigbee and reboot
-        Serial.printf("Reseting Zigbee to factory settings, reboot.\n");
+        Serial.printf("Resetting Zigbee to factory settings, reboot.\n");
         Zigbee.factoryReset();
       }
     }

libraries/Zigbee/examples/Zigbee_Temperature_Sensor/Zigbee_Temperature_Sensor.ino

@@ -82,13 +82,13 @@ void setup() {
   // Set reporting interval for temperature measurement in seconds, must be called after Zigbee.begin()
   // min_interval and max_interval in seconds, delta (temp change in °C)
   // if min = 1 and max = 0, reporting is sent only when temperature changes by delta
-  // if min = 0 and max = 10, reporting is sent every 10 secods or temperature changes by delta
+  // if min = 0 and max = 10, reporting is sent every 10 seconds or temperature changes by delta
   // if min = 0, max = 10 and delta = 0, reporting is sent every 10 seconds regardless of temperature change
   zbTempSensor.setReporting(1, 0, 1);
 }
 
 void loop() {
-  // Cheking button for factory reset
+  // Checking button for factory reset
   if (digitalRead(BUTTON_PIN) == LOW) {  // Push button pressed
     // Key debounce handling
     delay(100);
@@ -97,7 +97,7 @@ void loop() {
       delay(50);
       if ((millis() - startTime) > 3000) {
         // If key pressed for more than 3secs, factory reset Zigbee and reboot
-        Serial.printf("Reseting Zigbee to factory settings, reboot.\n");
+        Serial.printf("Resetting Zigbee to factory settings, reboot.\n");
         Zigbee.factoryReset();
       }
     }

libraries/Zigbee/examples/Zigbee_Thermostat/Zigbee_Thermostat.ino

@@ -67,7 +67,7 @@ void setup() {
   // Init button switch
   pinMode(BUTTON_PIN, INPUT);
 
-  // Set callback functions for temperature and configuration recieve
+  // Set callback functions for temperature and configuration receive
   zbThermostat.onTempRecieve(recieveSensorTemp);
   zbThermostat.onConfigRecieve(recieveSensorConfig);
 

libraries/Zigbee/src/ZigbeeCore.cpp

@@ -156,7 +156,7 @@ void ZigbeeCore::setRebootOpenNetwork(uint8_t time) {
 
 void ZigbeeCore::openNetwork(uint8_t time) {
   if (_started) {
-    log_v("Openning network for joining for %d seconds", time);
+    log_v("Opening network for joining for %d seconds", time);
     esp_zb_bdb_open_network(time);
   }
 }
@@ -198,7 +198,7 @@ void esp_zb_app_signal_handler(esp_zb_app_signal_t *signal_struct) {
           log_i("Device rebooted");
           Zigbee._started = true;
           if ((zigbee_role_t)Zigbee.getRole() == ZIGBEE_COORDINATOR && Zigbee._open_network > 0) {
-            log_i("Openning network for joining for %d seconds", Zigbee._open_network);
+            log_i("Opening network for joining for %d seconds", Zigbee._open_network);
             esp_zb_bdb_open_network(Zigbee._open_network);
           }
         }
@@ -289,7 +289,7 @@ void esp_zb_app_signal_handler(esp_zb_app_signal_t *signal_struct) {
 }
 
 void ZigbeeCore::factoryReset() {
-  log_v("Factory reseting Zigbee stack, device will reboot");
+  log_v("Factory resetting Zigbee stack, device will reboot");
   esp_zb_factory_reset();
 }
 

libraries/Zigbee/src/ZigbeeEP.h

@@ -7,7 +7,7 @@
 
 #include <Arduino.h>
 
-/* Usefull defines */
+/* Useful defines */
 #define ZB_ARRAY_LENTH(arr) (sizeof(arr) / sizeof(arr[0]))
 #define print_ieee_addr(addr) \
   log_i("IEEE Address: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X", addr[0], addr[1], addr[2], addr[3], addr[4], addr[5], addr[6], addr[7])
@@ -93,7 +93,7 @@ class ZigbeeEP {
   // findEndpoind may be implemented by EPs to find and bind devices
   virtual void findEndpoint(esp_zb_zdo_match_desc_req_param_t *cmd_req) {};
 
-  //list of all handlers function calls, to be overide by EPs implementation
+  //list of all handlers function calls, to be override by EPs implementation
   virtual void zbAttributeSet(const esp_zb_zcl_set_attr_value_message_t *message) {};
   virtual void zbAttributeRead(uint16_t cluster_id, const esp_zb_zcl_attribute_t *attribute) {};
   virtual void zbReadBasicCluster(const esp_zb_zcl_attribute_t *attribute);  //already implemented

libraries/Zigbee/src/ep/ZigbeeColorDimmableLight.cpp

@@ -47,7 +47,7 @@ void ZigbeeColorDimmableLight::calculateRGB(uint16_t x, uint16_t y, uint8_t &red
   blue = (uint8_t)(b * (float)255);
 }
 
-//set attribude method -> methon overriden in child class
+//set attribute method -> method overriden in child class
 void ZigbeeColorDimmableLight::zbAttributeSet(const esp_zb_zcl_set_attr_value_message_t *message) {
   //check the data and call right method
   if (message->info.cluster == ESP_ZB_ZCL_CLUSTER_ID_ON_OFF) {
@@ -58,7 +58,7 @@ void ZigbeeColorDimmableLight::zbAttributeSet(const esp_zb_zcl_set_attr_value_me
       }
       return;
     } else {
-      log_w("Recieved message ignored. Attribute ID: %d not supported for On/Off Light", message->attribute.id);
+      log_w("Received message ignored. Attribute ID: %d not supported for On/Off Light", message->attribute.id);
     }
   } else if (message->info.cluster == ESP_ZB_ZCL_CLUSTER_ID_LEVEL_CONTROL) {
     if (message->attribute.id == ESP_ZB_ZCL_ATTR_LEVEL_CONTROL_CURRENT_LEVEL_ID && message->attribute.data.type == ESP_ZB_ZCL_ATTR_TYPE_U8) {
@@ -68,7 +68,7 @@ void ZigbeeColorDimmableLight::zbAttributeSet(const esp_zb_zcl_set_attr_value_me
       }
       return;
     } else {
-      log_w("Recieved message ignored. Attribute ID: %d not supported for Level Control", message->attribute.id);
+      log_w("Received message ignored. Attribute ID: %d not supported for Level Control", message->attribute.id);
       //TODO: implement more attributes -> includes/zcl/esp_zigbee_zcl_level.h
     }
   } else if (message->info.cluster == ESP_ZB_ZCL_CLUSTER_ID_COLOR_CONTROL) {
@@ -96,10 +96,10 @@ void ZigbeeColorDimmableLight::zbAttributeSet(const esp_zb_zcl_set_attr_value_me
       lightChanged();
       return;
     } else {
-      log_w("Recieved message ignored. Attribute ID: %d not supported for Color Control", message->attribute.id);
+      log_w("Received message ignored. Attribute ID: %d not supported for Color Control", message->attribute.id);
     }
   } else {
-    log_w("Recieved message ignored. Cluster ID: %d not supported for Color dimmable Light", message->info.cluster);
+    log_w("Received message ignored. Cluster ID: %d not supported for Color dimmable Light", message->info.cluster);
   }
 }
 

libraries/Zigbee/src/ep/ZigbeeLight.cpp

@@ -9,18 +9,18 @@ ZigbeeLight::ZigbeeLight(uint8_t endpoint) : ZigbeeEP(endpoint) {
   _ep_config = {.endpoint = _endpoint, .app_profile_id = ESP_ZB_AF_HA_PROFILE_ID, .app_device_id = ESP_ZB_HA_ON_OFF_LIGHT_DEVICE_ID, .app_device_version = 0};
 }
 
-//set attribude method -> methon overriden in child class
+//set attribute method -> method overridden in child class
 void ZigbeeLight::zbAttributeSet(const esp_zb_zcl_set_attr_value_message_t *message) {
   //check the data and call right method
   if (message->info.cluster == ESP_ZB_ZCL_CLUSTER_ID_ON_OFF) {
     if (message->attribute.id == ESP_ZB_ZCL_ATTR_ON_OFF_ON_OFF_ID && message->attribute.data.type == ESP_ZB_ZCL_ATTR_TYPE_BOOL) {
       _current_state = *(bool *)message->attribute.data.value;
       lightChanged();
     } else {
-      log_w("Recieved message ignored. Attribute ID: %d not supported for On/Off Light", message->attribute.id);
+      log_w("Received message ignored. Attribute ID: %d not supported for On/Off Light", message->attribute.id);
     }
   } else {
-    log_w("Recieved message ignored. Cluster ID: %d not supported for On/Off Light", message->info.cluster);
+    log_w("Received message ignored. Cluster ID: %d not supported for On/Off Light", message->info.cluster);
   }
 }