- 中文版本
- Basic Example:
This example demonstrates how the ADF periph_console controls the esp_audio API and other system APIs.
Familiarization with commands when using the command-line interface (CLI) can greatly speed up the debug analysis and feature test of ADF projects.
- Refer to the table below for the supported commands:
| Index | Command | Description or Usage | Related Function |
|---|---|---|---|
| 01 | play | Play music with given index, cmd:"play [index or url] [byte_pos]" 1."play" 2. play with index after scan, "play index_number" 3. play with specific url, "play url_path" |
cli_play |
| 02 | pause | Pause the playing music | cli_pause |
| 03 | resume | Resume | cli_resume |
| 04 | stop | Stop player | cli_stop |
| 05 | setvol | Set volume | cli_set_vol |
| 06 | getvol | Get volume | cli_get_vol |
| 07 | getpos | Get position by seconds | get_pos |
| 08 | seek | Seek position by second | cli_seek |
| 09 | duration | Get music duration | cli_duration |
| 10 | tone | Insert tone to play | cli_insert_tone |
| 11 | stone | Stop tone by a timer | cli_stop_tone |
| 12 | setspeed | Set speed | cli_set_speed |
| 13 | getspeed | Get speed | cli_get_speed |
| 14 | join | Join Wi-Fi AP as a station | wifi_set |
| 15 | wifi | Get connected AP information | wifi_info |
| 16 | led | Lyrat-MSC led bar pattern | led |
| 17 | scan | Scan SD card music file, cmd: "scan [path]",e.g. "scan /sdcard" | playlist_sd_scan |
| 18 | list | Show scanned playlist | playlist_sd_show |
| 19 | next | Next x file to play, cmd: "next [step]" | playlist_sd_next |
| 20 | prev | Previous x file to play, cmd: "prev [step]" | playlist_sd_prev |
| 21 | mode | Set auto play mode, cmd:"mode [value]", 0: once; others: playlist loop all | playlist_set_mode |
| 22 | reboot | Reboot system | sys_reset |
| 23 | free | Get system free memory | show_free_mem |
| 24 | stat | Show processor time of all FreeRTOS tasks | run_time_stats |
| 25 | tasks | Get information about running tasks | task_list |
| 26 | system | Get freertos all task states information | task_real_time_states |
This example runs on the boards that are marked with a green checkbox in the table. Please remember to select the board in menuconfig as discussed in Section Configuration below.
This example supports IDF release/v5.0 and later branches. By default, it runs on ADF's built-in branch $ADF_PATH/esp-idf.
Prepare a microSD card and some audio files in AMR, FLAC, OGG, OPUS, MP3, WAV, AAC, TS, M4A and other formats, and name them test.amr, test.flac, test.ogg, test.opus, test.mp3, test.wav, test.aac, test.ts, and test.m4a. Then, copy them to the card, and insert the card to the development board.
The default board for this example is ESP32-Lyrat V4.3, if you need to run this example on other development boards, select the board in menuconfig, such as ESP32-Lyrat-Mini V1.1.
menuconfig > Audio HAL > ESP32-Lyrat-Mini V1.1
If you need to modify the audio file name, please enable FatFs long file name support.
menuconfig > Component config > FAT Filesystem support > Long filename support
Build the project and flash it to the board, then run monitor tool to view serial output (replace PORT with your board's serial port name):
idf.py -p PORT flash monitor
To exit the serial monitor, type Ctrl-].
See ESP-IDF Programming Guide for full steps to configure and build an ESP-IDF project.
- The example starts running and the terminal prompts
esp32and waits for you to input commands. The log is as follows:
entry 0x400806f4
I (27) boot: ESP-IDF v4.2.2 2nd stage bootloader
I (27) boot: compile time 15:16:34
I (27) boot: chip revision: 3
I (30) boot_comm: chip revision: 3, min. bootloader chip revision: 0
I (37) boot.esp32: SPI Speed : 40MHz
I (42) boot.esp32: SPI Mode : DIO
I (46) boot.esp32: SPI Flash Size : 4MB
I (51) boot: Enabling RNG early entropy source...
I (56) boot: Partition Table:
I (60) boot: ## Label Usage Type ST Offset Length
I (67) boot: 0 nvs WiFi data 01 02 00009000 00006000
I (75) boot: 1 phy_init RF data 01 01 0000f000 00001000
I (82) boot: 2 factory factory app 00 00 00010000 00200000
I (90) boot: End of partition table
I (94) boot_comm: chip revision: 3, min. application chip revision: 0
I (101) esp_image: segment 0: paddr=0x00010020 vaddr=0x3f400020 size=0x866c8 (550600) map
I (340) esp_image: segment 1: paddr=0x000966f0 vaddr=0x3ffb0000 size=0x03620 ( 13856) load
I (346) esp_image: segment 2: paddr=0x00099d18 vaddr=0x40080000 size=0x06300 ( 25344) load
0x40080000: _WindowOverflow4 at /hengyongchao/esp-idfs/esp-idf-v4.2.2/components/freertos/xtensa/xtensa_vectors.S:1730
I (359) esp_image: segment 3: paddr=0x000a0020 vaddr=0x400d0020 size=0x1098bc (1087676) map
0x400d0020: _stext at ??:?
I (813) esp_image: segment 4: paddr=0x001a98e4 vaddr=0x40086300 size=0x189c0 (100800) load
0x40086300: esp_flash_erase_region at /hengyongchao/esp-idfs/esp-idf-v4.2.2/components/spi_flash/esp_flash_api.c:364
I (878) boot: Loaded app from partition at offset 0x10000
I (878) boot: Disabling RNG early entropy source...
I (879) psram: This chip is ESP32-D0WD
I (884) spiram: Found 64MBit SPI RAM device
I (888) spiram: SPI RAM mode: flash 40m sram 40m
I (893) spiram: PSRAM initialized, cache is in low/high (2-core) mode.
I (900) cpu_start: Pro cpu up.
I (904) cpu_start: Application information:
I (909) cpu_start: Project name: cli_app
I (914) cpu_start: App version: v2.2-201-g6fa02923
I (920) cpu_start: Compile time: Oct 8 2021 15:16:28
I (926) cpu_start: ELF file SHA256: 678b9a48007e0989...
I (932) cpu_start: ESP-IDF: v4.2.2
I (937) cpu_start: Starting app cpu, entry point is 0x40082050
0x40082050: call_start_cpu1 at /hengyongchao/esp-idfs/esp-idf-v4.2.2/components/esp32/cpu_start.c:287
I (0) cpu_start: App cpu up.
I (1831) spiram: SPI SRAM memory test OK
I (1831) heap_init: Initializing. RAM available for dynamic allocation:
I (1832) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (1838) heap_init: At 3FFB8870 len 00027790 (157 KiB): DRAM
I (1844) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (1850) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (1857) heap_init: At 4009ECC0 len 00001340 (4 KiB): IRAM
I (1863) cpu_start: Pro cpu start user code
I (1868) spiram: Adding pool of 4096K of external SPI memory to heap allocator
I (1890) spi_flash: detected chip: gd
I (1891) spi_flash: flash io: dio
W (1891) spi_flash: Detected size(8192k) larger than the size in the binary image header(4096k). Using the size in the binary image header.
I (1901) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
I (1912) spiram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (1952) SDCARD: Using 1-line SD mode, 4-line SD mode, base path=/sdcard
I (1992) SDCARD: CID name SA16G!
I (2452) CONSOLE_EXAMPLE: Start Wi-Fi
I (2452) gpio: GPIO[19]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:3
E (2452) gpio: gpio_install_isr_service(438): GPIO isr service already installed
I (2472) wifi:wifi driver task: 3ffca798, prio:23, stack:6656, core=0
I (2472) system_api: Base MAC address is not set
I (2472) system_api: read default base MAC address from EFUSE
I (2482) wifi:wifi firmware version: bb6888c
I (2482) wifi:wifi certification version: v7.0
I (2482) wifi:config NVS flash: enabled
I (2492) wifi:config nano formating: disabled
I (2492) wifi:Init data frame dynamic rx buffer num: 32
I (2492) wifi:Init management frame dynamic rx buffer num: 32
I (2502) wifi:Init management short buffer num: 32
I (2512) wifi:Init static tx buffer num: 16
I (2512) wifi:Init tx cache buffer num: 32
I (2512) wifi:Init static rx buffer size: 1600
I (2522) wifi:Init static rx buffer num: 10
I (2522) wifi:Init dynamic rx buffer num: 32
I (2532) wifi_init: rx ba win: 6
I (2532) wifi_init: tcpip mbox: 32
I (2532) wifi_init: udp mbox: 6
I (2542) wifi_init: tcp mbox: 6
I (2542) wifi_init: tcp tx win: 5744
I (2542) wifi_init: tcp rx win: 5744
I (2552) wifi_init: tcp mss: 1440
I (2552) wifi_init: WiFi IRAM OP enabled
I (2562) wifi_init: WiFi RX IRAM OP enabled
I (2562) phy_init: phy_version 4660,0162888,Dec 23 2020
I (2692) wifi:mode : sta (94:b9:7e:65:c2:44)
I (2702) gpio: GPIO[21]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (2702) ES8388_DRIVER: init,out:02, in:00
I (2712) ESP_AUDIO_TASK: media_ctrl_task running...,0x3f806b38
----------------------------- ESP Audio Platform -----------------------------
| |
| ESP_AUDIO-v1.7.0-9-g84df87e-037bef3-09be8fe |
| Compile date: Jul 20 2021-13:51:36 |
------------------------------------------------------------------------------
I (2742) ESP_AUDIO_CTRL: Func:media_ctrl_create, Line:350, MEM Total:4292044 Bytes, Inter:146012 Bytes, Dram:141120 Bytes
I (2752) AUDIO_HAL: Codec mode is 3, Ctrl:1
I (2762) I2S: DMA Malloc info, datalen=blocksize=1200, dma_buf_count=3
I (2772) I2S: DMA Malloc info, datalen=blocksize=1200, dma_buf_count=3
I (2802) I2S: APLL: Req RATE: 48000, real rate: 47999.961, BITS: 16, CLKM: 1, BCK_M: 8, MCLK: 12287990.000, SCLK: 1535998.750000, diva: 1, divb: 0
I (2802) LYRAT_V4_3: I2S0, MCLK output by GPIO0
I (2812) MP3_DECODER: MP3 init
W (2812) I2S: I2S driver already installed
I (2812) LYRAT_V4_3: I2S0, MCLK output by GPIO0
I (2822) CONSOLE_EXAMPLE: Func:cli_setup_player, Line:657, MEM Total:4273924 Bytes, Inter:123648 Bytes, Dram:118756 Bytes
I (2832) CONSOLE_EXAMPLE: esp_audio instance is:0x3f806b38
esp32>- Now, you can use the
joincommand to connect to the Wi-Fi AP. The SSID of the wireless router isesp32, and the password isesp123456. After the command is executed, the log will prompt that the device has successfully obtained the IP address. See the full log below.
esp32> join esp32 esp123456
I (40462) CONSOLE_EXAMPLE: Connecting Wi-Fi, SSID:"esp32" PASSWORD:"esp123456"
esp32> I (41682) wifi:new:<11,0>, old:<1,0>, ap:<255,255>, sta:<11,0>, prof:1
I (42532) wifi:state: init -> auth (b0)
I (42552) wifi:state: auth -> assoc (0)
I (42562) wifi:state: assoc -> run (10)
I (42572) wifi:connected with esp32, aid = 2, channel 11, BW20, bssid = fc:ec:da:b7:11:c7
I (42572) wifi:security: WPA2-PSK, phy: bgn, rssi: -40
I (42572) wifi:pm start, type: 1
W (42592) PERIPH_WIFI: WiFi Event cb, Unhandle event_base:WIFI_EVENT, event_id:4
I (42712) wifi:AP's beacon interval = 102400 us, DTIM period = 3
I (44452) esp_netif_handlers: sta ip: 192.168.5.187, mask: 255.255.255.0, gw: 192.168.5.1
I (44452) PERIPH_WIFI: Got ip:192.168.5.187
esp32>- Enter the
scan /sdcardcommand to scan audio files in the microSD card. The log is as follows:
esp32> scan /sdcard
I (92022) PLAYLIST_SDCARD: ID URL
I (92022) PLAYLIST_SDCARD: 0 file://sdcard/wechat.amr
I (92022) PLAYLIST_SDCARD: 1 file://sdcard/test.mp3
I (92022) PLAYLIST_SDCARD: 2 file://sdcard/DU1906_����_������Ƶ.mp3
I (92042) PLAYLIST_SDCARD: 3 file://sdcard/REC.WAV
I (92042) PLAYLIST_SDCARD: 4 file://sdcard/rec_out.wav
I (92052) PLAYLIST_SDCARD: 5 file://sdcard/rec_out.amr
I (92052) PLAYLIST_SDCARD: 6 file://sdcard/test.aac
I (92062) PLAYLIST_SDCARD: 7 file://sdcard/test_output.mp3
I (92062) PLAYLIST_SDCARD: 8 file://sdcard/1.Lyrat_v4.3_REC_ble_spi_sdcard.WAV
I (92082) PLAYLIST_SDCARD: 9 file://sdcard/start_service.mp3
I (92082) PLAYLIST_SDCARD: 10 file://sdcard/588E81FFFE34F6D92020-05-28-15-48-47.opus
I (92092) PLAYLIST_SDCARD: 11 file://sdcard/588E81FFFE34F6D92020-05-28-16-13-17.opus
I (92092) PLAYLIST_SDCARD: 12 file://sdcard/588E81FFFE34F6D92020-05-28-17-12-43.opus
I (92112) PLAYLIST_SDCARD: 13 file://sdcard/test.wav
I (92112) PLAYLIST_SDCARD: 14 file://sdcard/2.Lyrat_v4.3_REC_spi_sdcard.WAV
I (92122) PLAYLIST_SDCARD: 15 file://sdcard/7c9ebdcf12f0-19700101080024.wav
esp32>- Enter
play 13to play the audio filetest.WAVwith the index 13 from the microSD card. The log is as follows:
I (123222) CONSOLE_EXAMPLE: app_audio play
I (123232) CONSOLE_EXAMPLE: play index= 13, URI:file://sdcard/test.wav, byte_pos:0
I (123232) ESP_AUDIO_CTRL: Enter play procedure, src:0
I (123242) ESP_AUDIO_CTRL: Play procedure, URL is ok, src:0
I (123242) ESP_AUDIO_CTRL: Request_CMD_Queue CMD:0, Available:5, que:0x3ffe0ed4
I (123252) ESP_AUDIO_TASK: It's a decoder
I (123262) ESP_AUDIO_TASK: 1.CUR IN:[IN_file],CODEC:[DEC_wav],RESAMPLE:[48000],OUT:[OUT_iis],rate:0,ch:0,pos:0
I (123262) ESP_AUDIO_CTRL: Func:_ctrl_play, Line:771, MEM Total:4268264 Bytes, Inter:118056 Bytes, Dram:113164 Bytes
�[0I (123272) ESP_AUDIO_TASK: 2.Handles,IN:0x3f806e9c,CODEC:0x3f807f14,FILTER:0x3f808d88,OUT:0x3f808704
m
I (123292) ESP_AUDIO_TASK: 2.2 Update all pipeline
I (123292) ESP_AUDIO_TASK: 2.3 Linked new pipeline
I (123302) AUDIO_PIPELINE: link el->rb, el:0x3f806e9c, tag:IN_file, rb:0x3f80909c
I (123312) AUDIO_PIPELINE: link el->rb, el:0x3f807f14, tag:DEC_wav, rb:0x3f80b8dc
I (123312) AUDIO_PIPELINE: link el->rb, el:0x3f808d88, tag:Audio_forge, rb:0x3f80d91c
I (123322) ESP_AUDIO_TASK: 3. Previous starting...
I (123332) AUDIO_ELEMENT: [IN_file-0x3f806e9c] Element task created
I (123342) AUDIO_ELEMENT: [IN_file] AEL_MSG_CMD_RESUME,state:1
I (123342) AUDIO_ELEMENT: [DEC_wav-0x3f807f14] Element task created
I (123352) AUDIO_ELEMENT: [DEC_wav] AEL_MSG_CMD_RESUME,state:1
I (123352) ESP_AUDIO_TASK: Blocking play until received AEL_MSG_CMD_REPORT_MUSIC_INFO
I (123362) FATFS_STREAM: File size: 17432920 byte, file position: 0
I (123372) ESP_AUDIO_TASK: Recv Element[IN_file-0x3f806e9c] MSG,type:20000,cmd:8,len:4,status:AEL_STATUS_STATE_RUNNING
I (123372) CODEC_ELEMENT_HELPER: The element is 0x3f807f14. The reserve data 2 is 0x0.
I (123392) WAV_DECODER: a new song playing
I (123392) ESP_AUDIO_TASK: Received music info then on play
I (123412) ESP_AUDIO_TASK: On event play, status:UNKNOWN, 0
I (123412) AUDIO_ELEMENT: [Audio_forge-0x3f808d88] Element task created
I (123422) AUDIO_ELEMENT: [Audio_forge] AEL_MSG_CMD_RESUME,state:1
I (123422) AUDIO_FORGE: audio_forge opened
I (123422) AUDIO_ELEMENT: [OUT_iis-0x3f808704] Element task created
I (123442) AUDIO_ELEMENT: [OUT_iis] AEL_MSG_CMD_RESUME,state:1
I (123442) I2S_STREAM: AUDIO_STREAM_WRITER
I (123442) ESP_AUDIO_TASK: Recv Element[DEC_wav-0x3f807f14] MSG,type:20000,cmd:8,len:4,status:AEL_STATUS_STATE_RUNNING
I (123462) ESP_AUDIO_TASK: Recv Element[Audio_forge-0x3f808d88] MSG,type:20000,cmd:8,len:4,status:AEL_STATUS_STATE_RUNNING
I (123472) ESP_AUDIO_TASK: Recv Element[OUT_iis-0x3f808704] MSG,type:20000,cmd:8,len:4,status:AEL_STATUS_STATE_RUNNING
I (123492) ESP_AUDIO_TASK: ESP_AUDIO status is AEL_STATUS_STATE_RUNNING, 0, src:0, is_stopping:0
I (123492) ESP_AUDIO_TASK: Func:media_ctrl_task, Line:938, MEM Total:4191004 Bytes, Inter:101240 Bytes, Dram:96348 Bytes
I (123502) ESP_AUDIO_CTRL: Exit play procedure, ret:0
esp32> I (123502) CONSOLE_EXAMPLE: esp_auido status:1,err:0
esp32> W (214072) FATFS_STREAM: No more data, ret:0
I (214072) AUDIO_ELEMENT: IN-[IN_file] AEL_IO_DONE,0
I (214072) ESP_AUDIO_TASK: Recv Element[IN_file-0x3f806e9c] MSG,type:20000,cmd:8,len:4,status:AEL_STATUS_STATE_FINISHED
I (214122) AUDIO_ELEMENT: IN-[DEC_wav] AEL_IO_DONE,-2
I (214132) DEC_WAV: Closed
I (214132) ESP_AUDIO_TASK: Received last pos: 17432920 bytes
I (214132) ESP_AUDIO_TASK: Recv Element[DEC_wav-0x3f807f14] MSG,type:20000,cmd:8,len:4,status:AEL_STATUS_STATE_FINISHED
I (214172) AUDIO_ELEMENT: IN-[Audio_forge] AEL_IO_DONE,-2
I (214172) AUDIO_FORGE: audio forge closed
I (214172) ESP_AUDIO_TASK: Recv Element[Audio_forge-0x3f808d88] MSG,type:20000,cmd:8,len:4,status:AEL_STATUS_STATE_FINISHED
I (214232) AUDIO_ELEMENT: IN-[OUT_iis] AEL_IO_DONE,-2
I (214262) ESP_AUDIO_TASK: Received last time: 90794 ms
I (214262) ESP_AUDIO_TASK: Recv Element[OUT_iis-0x3f808704] MSG,type:20000,cmd:8,len:4,status:AEL_STATUS_STATE_FINISHED
I (214282) ESP_AUDIO_TASK: ESP_AUDIO status is AEL_STATUS_STATE_FINISHED, 0, src:0, is_stopping:0
I (214292) ESP_AUDIO_TASK: Func:media_ctrl_task, Line:938, MEM Total:4219308 Bytes, Inter:101336 Bytes, Dram:96444 Bytes
W (214292) ESP_AUDIO_TASK: Destroy the old pipeline, FINISHED
W (214302) ESP_AUDIO_TASK: The old pipeline destroyed, FINISHED
I (214302) CONSOLE_EXAMPLE: esp_auido status:4,err:0
I (214322) ESP_AUDIO_CTRL: Total:17432920, get duration:90796 ms by bps:1536000
I (214322) CONSOLE_EXAMPLE: [ * ] End of time:90794 ms, duration:90796 ms
I (214332) CONSOLE_EXAMPLE: Func:esp_audio_state_task, Line:522, MEM Total:4239008 Bytes, Inter:116632 Bytes, Dram:111740 Bytes
esp32>- You could also try other commands. Use the
helpcommand to get command help.
esp32> help
----------------------
Perpheral console HELP
----------------------
play Play music, cmd:"play [index or url] [byte_pos]",
e.g. 1."play"; 2. play with index after scan,"play index_number"; 3.play with specific url, "play url_path"
pause Pause
resume Resume
stop Stop player
setvol Set volume
getvol Get volume
getpos Get position by seconds
seek Seek position by second
duration Get music duration
tone Insert tone to play
stone Stop tone by a timer
setspeed Set speed
getspeed Get speed
join Join WiFi AP as a station
wifi Get connected AP information
led Lyrat-MSC led bar pattern
scan Scan sdcard music file, cmd: "scan [path]",e.g. "scan /sdcard"
list Show scanned playlist
next Next x file to play, cmd: "next [step]"
prev Previous x file to play, cmd: "prev [step]"
mode Set auto play mode, cmd:"mode [value]", 0:once; others: playlist loop all
reboot Reboot system
free Get system free memory
stat Show processor time of all FreeRTOS tasks
tasks Get information about running tasks
system Get freertos all task states information
esp32>A complete log is as follows:
ets Jul 29 2019 12:21:46
rst:0x1 (POWERON_RESET),boot:0x1f (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:7152
load:0x40078000,len:13664
load:0x40080400,len:4632
0x40080400: _init at ??:?
entry 0x400806f4
I (27) boot: ESP-IDF v4.2.2 2nd stage bootloader
I (27) boot: compile time 15:16:34
I (27) boot: chip revision: 3
I (30) boot_comm: chip revision: 3, min. bootloader chip revision: 0
I (37) boot.esp32: SPI Speed : 40MHz
I (42) boot.esp32: SPI Mode : DIO
I (46) boot.esp32: SPI Flash Size : 4MB
I (51) boot: Enabling RNG early entropy source...
I (56) boot: Partition Table:
I (60) boot: ## Label Usage Type ST Offset Length
I (67) boot: 0 nvs WiFi data 01 02 00009000 00006000
I (75) boot: 1 phy_init RF data 01 01 0000f000 00001000
I (82) boot: 2 factory factory app 00 00 00010000 00200000
I (90) boot: End of partition table
I (94) boot_comm: chip revision: 3, min. application chip revision: 0
I (101) esp_image: segment 0: paddr=0x00010020 vaddr=0x3f400020 size=0x866c8 (550600) map
I (340) esp_image: segment 1: paddr=0x000966f0 vaddr=0x3ffb0000 size=0x03620 ( 13856) load
I (346) esp_image: segment 2: paddr=0x00099d18 vaddr=0x40080000 size=0x06300 ( 25344) load
0x40080000: _WindowOverflow4 at /hengyongchao/esp-idfs/esp-idf-v4.2.2/components/freertos/xtensa/xtensa_vectors.S:1730
I (359) esp_image: segment 3: paddr=0x000a0020 vaddr=0x400d0020 size=0x1098bc (1087676) map
0x400d0020: _stext at ??:?
I (813) esp_image: segment 4: paddr=0x001a98e4 vaddr=0x40086300 size=0x189c0 (100800) load
0x40086300: esp_flash_erase_region at /hengyongchao/esp-idfs/esp-idf-v4.2.2/components/spi_flash/esp_flash_api.c:364
I (878) boot: Loaded app from partition at offset 0x10000
I (878) boot: Disabling RNG early entropy source...
I (879) psram: This chip is ESP32-D0WD
I (884) spiram: Found 64MBit SPI RAM device
I (888) spiram: SPI RAM mode: flash 40m sram 40m
I (893) spiram: PSRAM initialized, cache is in low/high (2-core) mode.
I (900) cpu_start: Pro cpu up.
I (904) cpu_start: Application information:
I (909) cpu_start: Project name: cli_app
I (914) cpu_start: App version: v2.2-201-g6fa02923
I (920) cpu_start: Compile time: Oct 8 2021 15:16:28
I (926) cpu_start: ELF file SHA256: 678b9a48007e0989...
I (932) cpu_start: ESP-IDF: v4.2.2
I (937) cpu_start: Starting app cpu, entry point is 0x40082050
0x40082050: call_start_cpu1 at /hengyongchao/esp-idfs/esp-idf-v4.2.2/components/esp32/cpu_start.c:287
I (0) cpu_start: App cpu up.
I (1831) spiram: SPI SRAM memory test OK
I (1831) heap_init: Initializing. RAM available for dynamic allocation:
I (1832) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (1838) heap_init: At 3FFB8870 len 00027790 (157 KiB): DRAM
I (1844) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (1850) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (1857) heap_init: At 4009ECC0 len 00001340 (4 KiB): IRAM
I (1863) cpu_start: Pro cpu start user code
I (1868) spiram: Adding pool of 4096K of external SPI memory to heap allocator
I (1890) spi_flash: detected chip: gd
I (1891) spi_flash: flash io: dio
W (1891) spi_flash: Detected size(8192k) larger than the size in the binary image header(4096k). Using the size in the binary image header.
I (1901) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
I (1912) spiram: Reserving pool of 32K of internal memory for DMA/internal allocations
I (1952) SDCARD: Using 1-line SD mode, 4-line SD mode, base path=/sdcard
I (1992) SDCARD: CID name SA16G!
I (2452) CONSOLE_EXAMPLE: Start Wi-Fi
I (2452) gpio: GPIO[19]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:3
E (2452) gpio: gpio_install_isr_service(438): GPIO isr service already installed
I (2472) wifi:wifi driver task: 3ffca798, prio:23, stack:6656, core=0
I (2472) system_api: Base MAC address is not set
I (2472) system_api: read default base MAC address from EFUSE
I (2482) wifi:wifi firmware version: bb6888c
I (2482) wifi:wifi certification version: v7.0
I (2482) wifi:config NVS flash: enabled
I (2492) wifi:config nano formating: disabled
I (2492) wifi:Init data frame dynamic rx buffer num: 32
I (2492) wifi:Init management frame dynamic rx buffer num: 32
I (2502) wifi:Init management short buffer num: 32
I (2512) wifi:Init static tx buffer num: 16
I (2512) wifi:Init tx cache buffer num: 32
I (2512) wifi:Init static rx buffer size: 1600
I (2522) wifi:Init static rx buffer num: 10
I (2522) wifi:Init dynamic rx buffer num: 32
I (2532) wifi_init: rx ba win: 6
I (2532) wifi_init: tcpip mbox: 32
I (2532) wifi_init: udp mbox: 6
I (2542) wifi_init: tcp mbox: 6
I (2542) wifi_init: tcp tx win: 5744
I (2542) wifi_init: tcp rx win: 5744
I (2552) wifi_init: tcp mss: 1440
I (2552) wifi_init: WiFi IRAM OP enabled
I (2562) wifi_init: WiFi RX IRAM OP enabled
I (2562) phy_init: phy_version 4660,0162888,Dec 23 2020
I (2692) wifi:mode : sta (94:b9:7e:65:c2:44)
I (2702) gpio: GPIO[21]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
I (2702) ES8388_DRIVER: init,out:02, in:00
I (2712) ESP_AUDIO_TASK: media_ctrl_task running...,0x3f806b38
----------------------------- ESP Audio Platform -----------------------------
| |
| ESP_AUDIO-v1.7.0-9-g84df87e-037bef3-09be8fe |
| Compile date: Jul 20 2021-13:51:36 |
------------------------------------------------------------------------------
I (2742) ESP_AUDIO_CTRL: Func:media_ctrl_create, Line:350, MEM Total:4292044 Bytes, Inter:146012 Bytes, Dram:141120 Bytes
I (2752) AUDIO_HAL: Codec mode is 3, Ctrl:1
I (2762) I2S: DMA Malloc info, datalen=blocksize=1200, dma_buf_count=3
I (2772) I2S: DMA Malloc info, datalen=blocksize=1200, dma_buf_count=3
I (2802) I2S: APLL: Req RATE: 48000, real rate: 47999.961, BITS: 16, CLKM: 1, BCK_M: 8, MCLK: 12287990.000, SCLK: 1535998.750000, diva: 1, divb: 0
I (2802) LYRAT_V4_3: I2S0, MCLK output by GPIO0
I (2812) MP3_DECODER: MP3 init
W (2812) I2S: I2S driver already installed
I (2812) LYRAT_V4_3: I2S0, MCLK output by GPIO0
I (2822) CONSOLE_EXAMPLE: Func:cli_setup_player, Line:657, MEM Total:4273924 Bytes, Inter:123648 Bytes, Dram:118756 Bytes
I (2832) CONSOLE_EXAMPLE: esp_audio instance is:0x3f806b38
I (40462) CONSOLE_EXAMPLE: Connecting Wi-Fi, SSID:"esp32" PASSWORD:"esp123456"
esp32> I (41682) wifi:new:<11,0>, old:<1,0>, ap:<255,255>, sta:<11,0>, prof:1
I (42532) wifi:state: init -> auth (b0)
I (42552) wifi:state: auth -> assoc (0)
I (42562) wifi:state: assoc -> run (10)
I (42572) wifi:connected with esp32, aid = 2, channel 11, BW20, bssid = fc:ec:da:b7:11:c7
I (42572) wifi:security: WPA2-PSK, phy: bgn, rssi: -40
I (42572) wifi:pm start, type: 1
W (42592) PERIPH_WIFI: WiFi Event cb, Unhandle event_base:WIFI_EVENT, event_id:4
I (42712) wifi:AP's beacon interval = 102400 us, DTIM period = 3
I (44452) esp_netif_handlers: sta ip: 192.168.5.187, mask: 255.255.255.0, gw: 192.168.5.1
I (44452) PERIPH_WIFI: Got ip:192.168.5.187
I (92022) PLAYLIST_SDCARD: ID URL
I (92022) PLAYLIST_SDCARD: 0 file://sdcard/wechat.amr
I (92022) PLAYLIST_SDCARD: 1 file://sdcard/test.mp3
I (92022) PLAYLIST_SDCARD: 2 file://sdcard/DU1906_����_������Ƶ.mp3
I (92042) PLAYLIST_SDCARD: 3 file://sdcard/REC.WAV
I (92042) PLAYLIST_SDCARD: 4 file://sdcard/rec_out.wav
I (92052) PLAYLIST_SDCARD: 5 file://sdcard/rec_out.amr
I (92052) PLAYLIST_SDCARD: 6 file://sdcard/test.aac
I (92062) PLAYLIST_SDCARD: 7 file://sdcard/test_output.mp3
I (92062) PLAYLIST_SDCARD: 8 file://sdcard/1.Lyrat_v4.3_REC_ble_spi_sdcard.WAV
I (92082) PLAYLIST_SDCARD: 9 file://sdcard/start_service.mp3
I (92082) PLAYLIST_SDCARD: 10 file://sdcard/588E81FFFE34F6D92020-05-28-15-48-47.opus
I (92092) PLAYLIST_SDCARD: 11 file://sdcard/588E81FFFE34F6D92020-05-28-16-13-17.opus
I (92092) PLAYLIST_SDCARD: 12 file://sdcard/588E81FFFE34F6D92020-05-28-17-12-43.opus
I (92112) PLAYLIST_SDCARD: 13 file://sdcard/test.wav
I (92112) PLAYLIST_SDCARD: 14 file://sdcard/2.Lyrat_v4.3_REC_spi_sdcard.WAV
I (92122) PLAYLIST_SDCARD: 15 file://sdcard/7c9ebdcf12f0-19700101080024.wav
I (123222) CONSOLE_EXAMPLE: app_audio play
I (123232) CONSOLE_EXAMPLE: play index= 13, URI:file://sdcard/test.wav, byte_pos:0
I (123232) ESP_AUDIO_CTRL: Enter play procedure, src:0
I (123242) ESP_AUDIO_CTRL: Play procedure, URL is ok, src:0
I (123242) ESP_AUDIO_CTRL: Request_CMD_Queue CMD:0, Available:5, que:0x3ffe0ed4
I (123252) ESP_AUDIO_TASK: It's a decoder
I (123262) ESP_AUDIO_TASK: 1.CUR IN:[IN_file],CODEC:[DEC_wav],RESAMPLE:[48000],OUT:[OUT_iis],rate:0,ch:0,pos:0
I (123262) ESP_AUDIO_CTRL: Func:_ctrl_play, Line:771, MEM Total:4268264 Bytes, Inter:118056 Bytes, Dram:113164 Bytes
�[0I (123272) ESP_AUDIO_TASK: 2.Handles,IN:0x3f806e9c,CODEC:0x3f807f14,FILTER:0x3f808d88,OUT:0x3f808704
m
I (123292) ESP_AUDIO_TASK: 2.2 Update all pipeline
I (123292) ESP_AUDIO_TASK: 2.3 Linked new pipeline
I (123302) AUDIO_PIPELINE: link el->rb, el:0x3f806e9c, tag:IN_file, rb:0x3f80909c
I (123312) AUDIO_PIPELINE: link el->rb, el:0x3f807f14, tag:DEC_wav, rb:0x3f80b8dc
I (123312) AUDIO_PIPELINE: link el->rb, el:0x3f808d88, tag:Audio_forge, rb:0x3f80d91c
I (123322) ESP_AUDIO_TASK: 3. Previous starting...
I (123332) AUDIO_ELEMENT: [IN_file-0x3f806e9c] Element task created
I (123342) AUDIO_ELEMENT: [IN_file] AEL_MSG_CMD_RESUME,state:1
I (123342) AUDIO_ELEMENT: [DEC_wav-0x3f807f14] Element task created
I (123352) AUDIO_ELEMENT: [DEC_wav] AEL_MSG_CMD_RESUME,state:1
I (123352) ESP_AUDIO_TASK: Blocking play until received AEL_MSG_CMD_REPORT_MUSIC_INFO
I (123362) FATFS_STREAM: File size: 17432920 byte, file position: 0
I (123372) ESP_AUDIO_TASK: Recv Element[IN_file-0x3f806e9c] MSG,type:20000,cmd:8,len:4,status:AEL_STATUS_STATE_RUNNING
I (123372) CODEC_ELEMENT_HELPER: The element is 0x3f807f14. The reserve data 2 is 0x0.
I (123392) WAV_DECODER: a new song playing
I (123392) ESP_AUDIO_TASK: Received music info then on play
I (123412) ESP_AUDIO_TASK: On event play, status:UNKNOWN, 0
I (123412) AUDIO_ELEMENT: [Audio_forge-0x3f808d88] Element task created
I (123422) AUDIO_ELEMENT: [Audio_forge] AEL_MSG_CMD_RESUME,state:1
I (123422) AUDIO_FORGE: audio_forge opened
I (123422) AUDIO_ELEMENT: [OUT_iis-0x3f808704] Element task created
I (123442) AUDIO_ELEMENT: [OUT_iis] AEL_MSG_CMD_RESUME,state:1
I (123442) I2S_STREAM: AUDIO_STREAM_WRITER
I (123442) ESP_AUDIO_TASK: Recv Element[DEC_wav-0x3f807f14] MSG,type:20000,cmd:8,len:4,status:AEL_STATUS_STATE_RUNNING
I (123462) ESP_AUDIO_TASK: Recv Element[Audio_forge-0x3f808d88] MSG,type:20000,cmd:8,len:4,status:AEL_STATUS_STATE_RUNNING
I (123472) ESP_AUDIO_TASK: Recv Element[OUT_iis-0x3f808704] MSG,type:20000,cmd:8,len:4,status:AEL_STATUS_STATE_RUNNING
I (123492) ESP_AUDIO_TASK: ESP_AUDIO status is AEL_STATUS_STATE_RUNNING, 0, src:0, is_stopping:0
I (123492) ESP_AUDIO_TASK: Func:media_ctrl_task, Line:938, MEM Total:4191004 Bytes, Inter:101240 Bytes, Dram:96348 Bytes
I (123502) ESP_AUDIO_CTRL: Exit play procedure, ret:0
esp32> I (123502) CONSOLE_EXAMPLE: esp_auido status:1,err:0
esp32> W (214072) FATFS_STREAM: No more data, ret:0
I (214072) AUDIO_ELEMENT: IN-[IN_file] AEL_IO_DONE,0
I (214072) ESP_AUDIO_TASK: Recv Element[IN_file-0x3f806e9c] MSG,type:20000,cmd:8,len:4,status:AEL_STATUS_STATE_FINISHED
I (214122) AUDIO_ELEMENT: IN-[DEC_wav] AEL_IO_DONE,-2
I (214132) DEC_WAV: Closed
I (214132) ESP_AUDIO_TASK: Received last pos: 17432920 bytes
I (214132) ESP_AUDIO_TASK: Recv Element[DEC_wav-0x3f807f14] MSG,type:20000,cmd:8,len:4,status:AEL_STATUS_STATE_FINISHED
I (214172) AUDIO_ELEMENT: IN-[Audio_forge] AEL_IO_DONE,-2
I (214172) AUDIO_FORGE: audio forge closed
I (214172) ESP_AUDIO_TASK: Recv Element[Audio_forge-0x3f808d88] MSG,type:20000,cmd:8,len:4,status:AEL_STATUS_STATE_FINISHED
I (214232) AUDIO_ELEMENT: IN-[OUT_iis] AEL_IO_DONE,-2
I (214262) ESP_AUDIO_TASK: Received last time: 90794 ms
I (214262) ESP_AUDIO_TASK: Recv Element[OUT_iis-0x3f808704] MSG,type:20000,cmd:8,len:4,status:AEL_STATUS_STATE_FINISHED
I (214282) ESP_AUDIO_TASK: ESP_AUDIO status is AEL_STATUS_STATE_FINISHED, 0, src:0, is_stopping:0
I (214292) ESP_AUDIO_TASK: Func:media_ctrl_task, Line:938, MEM Total:4219308 Bytes, Inter:101336 Bytes, Dram:96444 Bytes
W (214292) ESP_AUDIO_TASK: Destroy the old pipeline, FINISHED
W (214302) ESP_AUDIO_TASK: The old pipeline destroyed, FINISHED
I (214302) CONSOLE_EXAMPLE: esp_auido status:4,err:0
I (214322) ESP_AUDIO_CTRL: Total:17432920, get duration:90796 ms by bps:1536000
I (214322) CONSOLE_EXAMPLE: [ * ] End of time:90794 ms, duration:90796 ms
I (214332) CONSOLE_EXAMPLE: Func:esp_audio_state_task, Line:522, MEM Total:4239008 Bytes, Inter:116632 Bytes, Dram:111740 Bytes
esp32>
----------------------
Perpheral console HELP
----------------------
play Play music, cmd:"play [index or url] [byte_pos]",
e.g. 1."play"; 2. play with index after scan,"play index_number"; 3.play with specific url, "play url_path"
pause Pause
resume Resume
stop Stop player
setvol Set volume
getvol Get volume
getpos Get position by seconds
seek Seek position by second
duration Get music duration
tone Insert tone to play
stone Stop tone by a timer
setspeed Set speed
getspeed Get speed
join Join WiFi AP as a station
wifi Get connected AP information
led Lyrat-MSC led bar pattern
scan Scan sdcard music file, cmd: "scan [path]",e.g. "scan /sdcard"
list Show scanned playlist
next Next x file to play, cmd: "next [step]"
prev Previous x file to play, cmd: "prev [step]"
mode Set auto play mode, cmd:"mode [value]", 0:once; others: playlist loop all
reboot Reboot system
free Get system free memory
stat Show processor time of all FreeRTOS tasks
tasks Get information about running tasks
system Get freertos all task states information
esp32>- To run the
statcommand, please go tomenuconfig > Component Config > FreeRTOS > Enable FreeRTOS to collect run time statsand enableCONFIG_FREERTOS_GENERATE_RUN_TIME_STATS. - To run the
tasklistcommand, please go tomenuconfig > Component Config > FreeRTOS > Enable FreeRTOS trace facility and Enable FreeRTOS stats formatting functionsand enableCONFIG_FREERTOS_USE_TRACE_FACILITY. - To run AAC decoders, please set
CONFIG_FREERTOS_HZto 1000 Hz. - ESP32-S2-kaluga-1 does not support microSD card.
Please use the following feedback channels:
- For technical queries, go to the esp32.com forum
- For a feature request or bug report, create a GitHub issue
We will get back to you as soon as possible.