CHANGELOG.md

Changelog

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog.

1.2.1 - 2023-09-16

Added

• Added total duration to songbuilder sequencer
• Added corner radius setting to the globalcontrols module
• Added the ability to execute "console" commands directly from OSC using the /bespoke/console address
• Added buffershuffler features: fourtet effect and ability to only play when triggered
• Added new "cable_alpha" option in settings and in the globalcontrols module that allows you to reduce cables opacity to nearly invisible
• Added an option to wrap mouse around when panning canvas

Changed

• Made valuesetter force value updates
• Adjusted transport minimum tempo to 20 to sidestep weird issues when tempo is lower
• Allow toggling enabling state of prefabs, this will attempt to toggle the enabled state of all modules contained within
• Note cables have been made less thick
• Audio, note, and pulse cables now draw behind modules
• Changed how settings menu is positioned so it always spawns on-screen
• Adjusted background color alpha of prefab to make it less imposing-looking
• Changed how pulse width parameter affects sawtooth wave

Fixed

• Fixed an issue where savestates with effectchain modules saved prior to the 2022-11-25 build would not load
• Fixed an issues with the absence of modulation using incorrect defaults
• Fixed NaN when adjusting slider with out-of-range value
• Fixed velocity not working in drumplayer
• Fixed an issue where effectchain mix sliders couldn't be targeted by modulators
• Fixed a bug in the cosine window of the granulators that caused clicky noises at the end of grains
• Fixed a deadlock by upgrading JUCE that was causing startup hangs on MacOS 13

1.2.0 - 2023-07-13

Added

• Added button to the abletonlink module to allow users to align their measure count phase with peers
• Added checkboxes to enable deterministic modes on notechance and pulsechance
• Added a setting that allows changing the behavior of pasting onto UI controls
• Added drum pad mode to gridkeyboard
• Added buffershuffler module for slicing live input
• Added Push 2 integrations to many modules.
• Added option to keep VST preset from resetting exposed param sliders
• Added polyphony to notetable
• Added interface to allow better control over storing/deleting snapshots via midicontroller
• Added extend button to looper
• Added option to snapshot module to auto-store entries when switching between snapshots
• Added ability to delete snapshots by holding alt and clicking
• Added the ability to send notes and pulses directly to modules through OSC
• Added the ability to toggle minimize and enabled state of modules through OSC
• Added a way to move to a module as well as zoom to it through OSC
• Added outline stroke to held modules
• Added looperrecorder option to disable auto-advancing to the next looper
• Added pulseflag module to explicitly control pulse types
• Added setting to radiosequencer to disable connected controls when it is disabled
• Added "skip first" option to noteratchet
• Added option to the notestepper module to toggle allow chord mode
• Added ability for OSC to set and recall the viewport/minimap "bookmarks"
• Added the ability for OSC messages to interact directly with UI controls
• Added user documentation for the OSC features
• Added triangle menu option to allow notelooper to work with lookahead sequencers
• Added (computationally expensive) mode to recalculate EQ params per-sample
• Added ability to choose cable drop behavior in user preferences
• Warn about and visualize circular dependencies amongst audio modules
• Added triangle menu option to hide inactive cables for udiorouterand oterouter
• Added ability to release a cable into empty space to display the quickspawn menu
• Make timelinecontrol a real module
• Added songbuilder module
• Added timestamps to all control updates for sample-accurate actions
• Added "diatonic" checkboxes to capo and scaledegree
• Added num_rows option to radiosequencer
• Added retrigger option to noteoctaver
• Added boundstopulse module
• New quickspawn features: right click to browse, right click + type to search, press shift twice quickly to launch quick spawn menu
• Added slider mode to controlsequencer
• Added deterministic mode to velocitytochance
• Added ability to remove samples from beats module
• Added portamento glide mode
• Added modes to allow radiosequencer to run slower
• Added deterministic modes to notechance and pulsechance
• Added option for hockets to be repeatably random
• Added aesthetic touch to cables, to fade them out in the middle
• Added a setting that allows the disabling of the module highlights when they receive an event
• Added velocitycurve module
• Added noteecho module, to make note delay effect workflow clearer
• Added option to midicontroller triangle menu to suppress UI popup
• Added left/right buttons to browse drum sample directory
• Added the ability for scale and transport to randomize on BSK load
• Added velocitytochance module
• Added midi import and export to notecanvas
• Snap to grid: hold control while dragging a module, grid size is configurable in the settings menu
• New midi sync modules: clockin and clockout
• Added basic ableton link support
• Added get_targets() method to script
• Added ability to send arbitrary midi messages to VST plugins via the script module
• Added slider mode to valuesetter, for easier modulation
• Added more parameters to script's midicontroller.set_connection()

Changed

• Don't clear looperrecorder input buffer when committing to a looper
• Made canvas contents snapshottable across all modules with canvases
• Emproved midi clockin smoothness by switching to "delay-locked loop" setup
• Made the transport increase/decrease buttons jump to integer tempos, as a convenience to hit an exact integer tempo
• Allow disabling of output limiter
• In the tranpsort module made nudge finer-grained, and made reset start a stopped transport
• Added ability to stop passthrough on looper
• Make looperrecorder not temporarily silence after committing a loop, added a triangle menu checkbox to bring the old behavior back
• Listen to midi clock start/stop/reset messages, make start also resume playback
• Improved the chorddisplayer module
• Allow the scrollwheel to adjust the Q slider while hovering over a dot in the eq module
• Make it possible to enable/disable the quantizer module
• Changed how grid controllers edit drumsequencer, making it more responsive
• Feedback is now given when write audio completes
• Made the room size slider non linear in the freeverb effect
• Allow the freeverb roomsize value to go to 1 since this also works perfectly without feedback.
• When doing a "set" from the midicontroller, always force a value update
• Massive RAM savings by changing how global record buffer saves
• Sort the file list in the vstplugin's preset dropdown.
• Renamed presets to snapshots, to better reflect what the module does
• Allow the OSC control messages to work in percentage mode.
• Select all text when tabbing through text entries
• Make dropdowns close if you click the dropdown again
• If the current savestate filename is known use it in the prefix for multitrack recorder bounces
• Allowed changing the number of filter options in the notesorter module
• Made playsequencer resizable and fixed a grid size bug
• When hovering over an ADSR control, highlight the part of the curve that dragging would adjust
• Made the pulsebutton send pulses a sample later so that things like the notecreator work with it
• Make notedisplayer re-sizable
• Patch cables that carry NaN values are made visible and colored red
• Make ctrl-C copy hovered UI control value to clipboard
• Typing while holding a patch cable now behaves like clicking then typing
• Change up ADSR evaluation paradigm to handle thread safety better
• Script module: only automatically turn on scheduling lookahead when a note cable is connected
• Don't enforce looper target when it's associated with a looperrecorder
• Change default zoom level and ui scale of bespoke to 1.3
• Tweak that allows scripts to set modulator targets
• Change up notesequencer grid to make it easier to vary note length
• Allow modulators to directly connect to multiple UI controls, no macroslider necessary
• Queue all non-audio thread notes
• Make modulators send non-normalized values to non-floatslider controls
• Make ? help display scrollable
• Don't display duplicate plugins user has in different formats
• Added an option to have velocitytocv output 0 when a note is released
• Make notecounter module have deterministic random setting
• Improve scrolling on quickspawn menu
• Don't allow two modules to have the same name
• Distinguish "value setter"-style modulators from the continuous ones
• Make deterministic hocket lengths defined by sliders
• Added buttons to make it more straightforward to increment/decrement seed for notehocket, pulsehocket, notechance and pulsechance
• Change how notesequencer pitch randomization works, to make it sound more musical by default
• ADSR updates: make decay/release snappier by default, improve envelope editor
• Use gestures to detect when VST controls have been touched
• Optimizations to cable drawing
• Make chorder emit notes from lowest to highest
• Sort script files in dropdown
• Change karplusstrong feedback range
• Added pitch color reference to chorder grid
• Change up drumsequencer per-row randomization
• Compressor has new "drive" parameter
• Clockout has new "send start" button and multiplier
• Sampleplayer accepts pulse input
• Show raw values when showing last midicontroller input

Fixed

• Fixed basiceq not saving state
• Fixed issue where oversampling caused global record buffer to save at wrong rate
• Fixed some modulation inconsistencies
• Fixed a crash on load caused by effectchains with deleted prior effects of the same type
• Move the timestamp check so that MultitrackRecorder bounces have a timestamp even when the savestate wasn't saved yet
• Clean up data when removing a mapping in the macroslider
• Fixed notecanvas arrows causing notes to double-move
• Remove 0 from ADSR sliders to avoid the ability to cause NaNs
• Initialize default values for modulation curves, fixes issue where notecanvas or notelooper notes sounded different from notes played from keyboarddisplay, midicontroller, etc
• Made the groupcontrol module apply to all connections instead of only the first
• Fixed crash when clicking scale's "load SCL" or "load KBM" buttons via a midicontroller
• Fixed issue where opening a plugin with a modal popup will endlessly spam the popup
• Fixed a bug where LFO and EnvelopeEditor modules would not restore their minimized state
• Fixed a bug where the midioutput would not correctly handle the UseVoiceAsChannel setting for modulation.
• Fixed a bug where the ramper would never reach its target value
• Fixed push2control not saving bookmarks and favorites
• Fixed that prefabs (or containers) were saving twice
• Fixed EnvelopeEditor modulation when minimized
• Hard limit the number of effectchain modules instead of a crashing
• Made the effectchain effect controls untargetable by modulation cables since this crashes when modules are deleted.
• Fixed cables not moving to the correct location when a module that has direct children is minimized
• Fixed notecreator not disabling correctly
• Remove cables targeting controls on a deleting module
• Fixed the circlesequencer not triggering a note when a circle is set to 1
• Made file extensions mostly case insensitive on all platforms
• Refresh the file list in a vstplugin so that MIDI/OSC and other modulation work on load.
• Fixed a bug where note off's would turn off all notes with the same pitch even when specific voice id's were used
• Don't light up notefilter when velocity 0 is received
• Fixed issues clicking cables inside prefabs
• Fixed 0 velocity note input setting preset
• Fixed pumper envelope not attacking properly
• controlsequencer wasn't saving self-advance mode setting
• Fixed notegate can fail to turn off notes
• Fixed a bug where Canvas Controls could be modulated
• Fixed incorrect location of grid icon on patch sources when modules are inside a prefab
• EQ: Keep the dots in view and minimal size
• Allow multiple instances of sampleplayers to download different youtube videos at the same time
• Fixed null dereference when unhooking grid controller in some scenarios
• Fixed a division by zero if Pitch Per Octave was set to 0 (either by hand or through modulation)
• Improved IntSlider and FloatSlider accuracy especially when zoomed in
• Make the notedelayer module pass through the notes if it is disabled
• Fixed expression width
• Added a check in the grid module to see if the target isn't itself
• Allow scrolling in prefabs to zoom
• Fixed that you could drag prefab members from one prefab directly into another prefab
• Fixed using negative "widen" panner with mono input puts audio in left channel only
• Fixed issue where prefabs couldn't save to symlinked folders
• Fixed randomly-occurring dc offset on modules that use switch-and-ramp
• Don't allow prefab recursion (allowing it does not work correctly in many ways)
• Fixed issue where send's second target could get auto-assigned
• Fixed issue where you can use grid-snapping to drag a prefab into itself
• Fixed notesequencer sending note-off at wrong time in lookahead mode
• Fixed input audio not working correctly when using oversampling
• Fixed issue where presets didn't load properly if pointed at large grids
• Fixed crash when saving a sampler at one sample rate and loading the project at a different sample rate
• Fixed issue where some minimized modules would hide their cables
• When loading a save file, restore the canvas location/zoom level
• Fixed saved samples playing back at the wrong speed when loading in other sample rates
• Fixed global oversampling issues
• Fixed syntax highlighting issue where comments not drawing in script
• Fixed basiceqs grid, which wasn't accepting clicks
• Fixed bug where midicontroller grid cables couldn't be connected
• Handle param rename events from plugins
• Fixed deadlock when loading VCV Rack plugin and opening GUI
• Fixed modulator range not being set when attaching a modulator to a non-floatslider control
• Fixed modulator range not loading properly from a savestate
• Fixed issue with script-driven notes playing later than desired
• Fixed issue where radiosequencer steps can't be turned off via grid
• Fixed simple issue where key repeat wasn't being respected in quickspawn
• Make preset changes happen in main thread (to avoid audio thread hitch)
• Eliminate off-by-a-pixel discrepancies between mouse hover & mouse click
• Fixed crash when connecting a modulator a slider with a non-pinned LFO
• Fixed issue where intslider wasn't saving range
• Fixed issue where duplicating a modulator screws up the connection
• Fixed issue where resizing a module could also click controls
• Fixed potential crash if VST parameters mismatch
• Fixed modulators not connecting to VST parameters on load
• Fixed crash when spawning basiceq effect
• Fixed issue where directly spawning effectchain effects from quickspawn was giving the effectchain the name of the effect
• Fixed crash when spawning oscoutput
• Fixed groupcontrol loading improperly
• Fixed freeverb width range
• Various fixes to the LFO module
• Fixed the next and previous sample buttons in the sampleplayer pads on windows
• Fixed up some behavior to restore midicontroller "hotbind" functionality
• Fixed crash when midi output device is already in use
• Fixed loading of json when there is no device selected yet
• Sample valuesetters modulation more accurately when pulsing
• Fixed modules disappearing when lassoing onto a prefab
• Fixed some of the juce leakdetector crashes on exit
• Fixed notecanvas and textentry issues
• Module title bar takes precedence over hovered UI control, to avoid pressing UI control when you intend to drag module
• Fixed sample drag n drop on sampleplayer failing when you're hovered over a control
• When abletonlink module is disabled, don't respond to link tempo changes
• Fixed drumsequencer copying incorrectly when increasing measure count
• Improve ableton link stability
• Fixed m185sequencer playing notes when all lengths are zero
• Fixed relative paths being busted when using presets within prefabs
• Fixed crash when clicking "add" on midicontroller in list mode in certain scenario
• Improve midicontroller infinite encoder support

Removed

• Removed the drumsequencer presets, and replace them with a "clear" button
• Removed a few options that were completely ignored in the oscillator module

Security

• Security fix: allow users to review python scripts before running them

1.1.0 - 2021-11-16

Added

• Added new example patches
• Added user preferences to disable/increase motion trails
• Added macos signed build
• Allow mouse offset customization
• Added script controls to get and set module info
• Added user prefs to allow users to increase max channel count
• Added a VSTPlugin "Panic" button
• Added "copy build info" button to help menu
• Added a deterministic "random" number generator to script
• Added "reset" button to notestepper for better control
• Added paging to dropdown lists that are too big to fit on-screen
• Added notetable module
• Added notetoggle module
• Allow radiosequencers to enable multiple outputs at a time
• Added checkbox to allow sampleplayer cues to stop on note-off
• Added ability to lock drumsequencer rows to avoid randomness
• Hint that modulators can be dragged vertically to adjust min value
• Added category pages to settings menu
• Graphics options to disable lissajous and set background color
• Added ability to spawn and move modules by clicking rather than dragging
• Added the ability to hot load scripts when an external editor changes them
• Allow viewport panning with middle mouse button
• Added minimap
• Added a play/pause button to the transport module
• Added the ability to reset the phase of the signal generator
• Allow *.bsk files to be opened directly, or dropped onto the app window
• Added NoteExpression Router
• Show effectchain effects in "audio effects" dropdown on title bar
• Added support for SCL, oddsound and KBM.
• Added script styles to the script module

Changed

• Change notetable to have ascending default layout instead of random
• Make autopatch functionality more visible
• Make user preferences do "save and exit" if you've launched with an error
• Hide tooltips after typing or adjust canvas until the mouse moves again
• Updated notesequencer script interface
• Midi Controller sends CC out the MIDI pipe
• Updated to new random to fix warnings
• Use std::uniform_random rather than hand crafted
• Update slider smoother UI
• Tweak to how user data is copied over, and update user data version file
• Drumsynth quality updates
• Increase sequencing flexibility for controlsequencer and radiosequencer
• Make it possible to grab samples from drumplayer pads
• Increase patch cable click radius
• Made it possible to save without quitting, and just warn on preferences that require a restart
• Delete held cable if you right-click
• Overflow grid x values in the drumplayer to subsequent rows
• Use a project file stem as the saved recording prefix
• Don't allow out of range pitches through the notefilter
• Make textentry modulatable when it represents a number
• Make it possible to spawn LFOs directly
• Rename "reset layout" to "new patch" and add a confirmation popup
• Changes to dropdownlist and quickspawn to handle massive VST collections
• Using a more precise "center" value for endless encoders
• VST manager window with scanning as a sub process (prevents crashing Bespoke while scanning).
• Limit slider value entry to min and max range of the slider
• Make "delete" function as "backspace" everywhere that it makes sense
• "Chording" for quickspawn menu if you hold multiple keys, it will narrow down the quickspawn list
• Build a hard limiter into the output module, and worn users more explicitly when they're clipping
• VST Bus management (better handling of plugins that have more channels).
• Various improvements to the sample player user experience

Fixed

• Fixed midicontroller control cable being inaccessible in list view
• Fixed chordholder sending wrong velocity when pulsed
• Draw midicontroller overlay in the ui layer
• Fixed tooltip flicker when using quickspawn menu
• Fixed typo where script's get_width() was returning height
• Fixed VST panic button using wrong channel
• Fixed issue where sliders with smoothers always ramped in from 0 on load
• Fixed gridkeyboard stuck notes issue that can happen with push2
• Fixed crash when copying controlsequencer, radiosequencer, or script modules
• Don't overwrite drums.json if a user has customized it
• Fixed up issue with user preference editor and ASIO
• Fixed python get_target would crash if the module has NO target
• Fixed file chooser being broken on some Linux configs
• Fixed presets module
• Fixed synth modules spitting out a bunch of notes all at once if they receive input while disconnected
• Fixed a number of prefab issues
• Fixed bespoke starting up with a window size larger than the display
• Fixed multiple notecanvas issues
• Fixed control cable disconnects via backspace
• When there is a hovered UI control, force the mouse to interact with it
• Fixed deadlock on mac startup from yesterday's user preferences change
• Fixed dropdown drawing issues on push2
• Fixed crash when user preferences has unexpected JSON
• Fixed issue where clicking the triangle menu caused the module to get dragged around
• Fixed up some weirdness in settings UI with prefs that require restart
• Fixed recent mistake that was preventing old script BSKs from loading
• Make scripts properly reload multiple note outputs
• Fixed missing first notes on notecanvas when resetting the transport
• Fixed sliders on notesequencer overlapping
• Fixed mousewheel scroll behavior being broken on textentry
• Fixed *.bsk saving and loading on 32-bit
• Fixed issues with VSTs sorting incorrectly and not appearing in quickspawn
• Display bespoke version on error screen
• Fixed issue where triangle menu items could be targeted by modulators
• Fixed silly error that was keeping sustain pedal from working
• Fixed issue where quickspawn would place modules in the wrong position
• Fixed UI strangeness's when working while paused
• Fixed Locrian mode
• Fixed pulser not pulsing in "free" mode
• Fixed Shift+Hover to connect modules

Removed

• Get rid of functionality where you could click a title bar to stick it to the cursor
• Remove old smoothing from signalgenerator so now it can be modulated sharply and accurately

1.0.0 - 2021-09-14

Initial release

• First full public release

Commit log diffs