eko@eko-GE62VR-6RF:~$ picocom -b 115200 /dev/ttyUSB0 picocom v2.2
port is : /dev/ttyUSB0 flowcontrol : none baudrate is : 115200 parity is : none databits are : 8 stopbits are : 1 escape is : C-a local echo is : no noinit is : no noreset is : no nolock is : no send_cmd is : sz -vv receive_cmd is : rz -vv -E imap is : omap is : emap is : crcrlf,delbs,
Type [C-a] [C-h] to see available commands
Terminal ready
U-Boot SPL 2013.07 (Jul 28 2017 - 17:10:01) pll_init:365 l2cache_clk = 375000000 pll_cfg.pdiv = 8, pll_cfg.h2div = 4, pll_cfg.h0div = 4, pll_cfg.cdiv = 1, pll_cfg.l2div = 3 nf=36 nr = 1 od0 = 1 od1 = 1 cppcr is 02404900 CPM_CPAPCR 0470890d nf=42 nr = 1 od0 = 1 od1 = 1 cppcr is 02a04900 CPM_CPMPCR 07d0c90d nf=50 nr = 1 od0 = 1 od1 = 1 cppcr is 03204900 CPM_CPVPCR 0320490d cppcr 0x9a794410 apll_freq 860160000 mpll_freq 1000000000 vpll_freq = 1200000000 ddr sel mpll, cpu sel apll ddrfreq 500000000 cclk 860160000 l2clk 286720000 h0clk 250000000 h2clk 250000000 pclk 125000000 DDRC_DLP:0000f003
U-Boot 2013.07 (Jul 28 2017 - 17:10:01)
Board: ISVP (Ingenic XBurst T20 SoC) DRAM: 128 MiB Top of RAM usable for U-Boot at: 84000000 Reserving 399k for U-Boot at: 83f9c000 Reserving 32784k for malloc() at: 81f98000 Reserving 32 Bytes for Board Info at: 81f97fe0 Reserving 124 Bytes for Global Data at: 81f97f64 Reserving 128k for boot params() at: 81f77f64 Stack Pointer at: 81f77f48 Now running in RAM - U-Boot at: 83f9c000 MMC: msc: 0 the manufacturer c8 SF: Detected GD25Q128
*** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial misc_init_r before change the yellow_gpio gpio_request lable = yellow_gpio gpio = 38 misc_init_r after gpio_request the yellow_gpio ret is 38 misc_init_r after change the yellow_gpio ret is 0 misc_init_r before change the blue_gpio gpio_request lable = blue_gpio gpio = 39 misc_init_r after gpio_request the blue_gpio ret is 39 misc_init_r after change the blue_gpio ret is 1 gpio_request lable = night_gpio gpio = 81 misc_init_r after gpio_request the night_gpio ret is 81 misc_init_r after change the night_gpio ret is 0 gpio_request lable = night_gpio gpio = 25 misc_init_r after gpio_request the night_gpio ret is 25 misc_init_r after change the night_gpio ret is 0 gpio_request lable = night_gpio gpio = 49 misc_init_r after gpio_request the night_gpio ret is 49 misc_init_r after change the night_gpio ret is 0 gpio_request lable = USB_able_gpio gpio = 47 misc_init_r after gpio_request the USB_able_gpio ret is 47 misc_init_r after change the USB_able_gpio ret is 1 gpio_request lable = TF_able_gpio gpio = 43 misc_init_r after gpio_request the TF_able_gpio ret is 43 misc_init_r after change the TF_able_gpio ret is 1 gpio_request lable = SPK_able_gpio gpio = 63 misc_init_r after gpio_request the SPK_able_gpio ret is 63 misc_init_r after change the SPK_able_gpio ret is 0 gpio_request lable = SD_able_gpio gpio = 48 misc_init_r after gpio_request the SD_able_gpio ret is 48 misc_init_r after change the SD_able_gpio ret is 0 Hit any key to stop autoboot: 0 isvp_t20# FATAL: term closed eko@eko-GE62VR-6RF:~$