Skip to content

Latest commit

 

History

History
55 lines (37 loc) · 1.92 KB

README.md

File metadata and controls

55 lines (37 loc) · 1.92 KB

Index

        * Introduction
        * Integration details
        * Required properties
        * Copyright

Introduction

This repository contains platform-independent drivers and examples for STMicroelectronics MEMS sensors. The sensors drivers and examples are listed by product. Every product folder contains:

'driver' folder

This folder contains the driver files of Mems Sensor (.h and .c) to be included in your project. Driver documentation can be generated using Doxigen tool.

'examples' folder:

This folder contains examples showing how to integrate the Standard C driver in a project. They are written for STM32 Microcontroller using CubeMX API, but they can be used as a guideline for every platform.

Integration details

The driver is platform-independent, you only need to define the two functions for writing to and reading from Mems hardware bus (SPI or I2C).

Source code integration

  • Include in your project the driver files of Mems Sensor (.h and .c) located in the 'driver' folder of the desider product
  • Define in your code the read and write functions that use the I2C or SPI platform driver like the following:
    int32_t platform_write(void *handle, uint8_t Reg, uint8_t *Bufp, uint16_t len)
    int32_t platform_read(void *handle, uint8_t Reg, uint8_t *Bufp, uint16_t len)
  • Initialize the structure of device interface:
      dev_ctx.write_reg = platform_write;
      dev_ctx.read_reg = platform_read;
  • If needed by the platform read and write functions, initialize the handle parameter:
      dev_ctx.handle = &platform_handle;

Required properties

  • A standard C compiler for the desired target
  • A C library for the desired target and the desired interface (SPI, I2C)

More Information

http://st.com

Copyright

Copyright (C) 2018 STMicroelectronics