AMD Invalid Result - Radeon RX 580 Series - xmr-stak #221
Comments
|
Hi there, seems you're connecting to a monero pool and your configuration is on cryptonight coin(generic), remove pool.txt and run xmr-stak that again, this time enter monero7 as the coin to mine. i would suggest getting the latest version (2.4.7) to keep things on sync. Regards. |
|
Hello, I have the same problem. In pools.txt, "currency" is set to "monero7". Mining only with CPU (Threadripper 1950X) is fine as always, mining only with GPU returns 0 valid results, even though it keeps saying "New block detected". Waiting hours for even one valid result to show up doesn't help. Mining with both, only the CPU returns valid results. This is on Linux Manjaro, using AMD RX580 and xmr-stak-amd v2.4.7-c5f0505 from AUR: Hash rate on GPU same as for OP. |
|
You must use the driver 17.X because 18.X is broken.
|
|
Hi, I'm also on Archlinux, xmr-stak 2.4.7 and openclamd 18.30, with this settings : // gpu: Ellesmere memory:3130 I'm capable oh getting about 75% good results. If it can help. |
|
Same here, @pasengier . Running with --noCPU and your settings but intensity at 864 results in around 75% good results at 623.8 H/s. |
Hello everyone and thanks in advance for the support you are going to give me. First. let me say that before posting I carefully read other post having related issue. No answer for my case found.So, here I am, still not hopeless :)
Whenever I mine with the GPU (with the CPU everything goes smoothly) 0 shares are accepted and I have a Good result score of 0%.
Hardware configuration:
software configuration:
tar –xvf amdgpu-pro-18.10-572953.tar.xz; cd amdgpu-pro-18.10-572953; ./amd-pro-install –-opencl=legacy –-headlessI compiled the xmr-stak-amd to mine only with GPU as follows:
cmake -DCUDA_ENABLE=OFF -DCPU_ENABLE=OFF -DOpenCL_ENABLE=ON -DOpenCL_INCLUDE_DIR=/opt/amdgpu-pro/lib/x86_64-linux-gnu/ -DOpenCL_LIBRARY=/opt/amdgpu-pro/lib/x86_64-linux-gnu/libOpenCL.so ..Everything went smoothly and I can run the executable without any error, output below:
And then shares are rejected with "AMD Invalid Result GPU ID 0".
Highest hash rate: 629.7 H/s
Stability issues:
The PC has been assembled as it came from stock, NO overclock/Undervolt
CLINFO output:
Number of platforms: 1
Platform Profile: FULL_PROFILE
Platform Version: OpenCL 2.1 AMD-APP (2639.3)
Platform Name: AMD Accelerated Parallel Processing
Platform Vendor: Advanced Micro Devices, Inc.
Platform Extensions: cl_khr_icd cl_amd_event_callback cl_amd_offline_devices
Platform Name: AMD Accelerated Parallel Processing
Number of devices: 1
Device Type: CL_DEVICE_TYPE_GPU
Vendor ID: 1002h
Board name: Radeon RX 580 Series
Device Topology: PCI[ B#32, D#0, F#0 ]
Max compute units: 36
Max work items dimensions: 3
Max work items[0]: 1024
Max work items[1]: 1024
Max work items[2]: 1024
Max work group size: 256
Preferred vector width char: 4
Preferred vector width short: 2
Preferred vector width int: 1
Preferred vector width long: 1
Preferred vector width float: 1
Preferred vector width double: 1
Native vector width char: 4
Native vector width short: 2
Native vector width int: 1
Native vector width long: 1
Native vector width float: 1
Native vector width double: 1
Max clock frequency: 1411Mhz
Address bits: 64
Max memory allocation: 3422266572
Image support: Yes
Max number of images read arguments: 128
Max number of images write arguments: 8
Max image 2D width: 16384
Max image 2D height: 16384
Max image 3D width: 2048
Max image 3D height: 2048
Max image 3D depth: 2048
Max samplers within kernel: 16
Max size of kernel argument: 1024
Alignment (bits) of base address: 2048
Minimum alignment (bytes) for any datatype: 128
Single precision floating point capability
Denorms: No
Quiet NaNs: Yes
Round to nearest even: Yes
Round to zero: Yes
Round to +ve and infinity: Yes
IEEE754-2008 fused multiply-add: Yes
Cache type: Read/Write
Cache line size: 64
Cache size: 16384
Global memory size: 4285816832
Constant buffer size: 3422266572
Max number of constant args: 8
Local memory type: Scratchpad
Local memory size: 32768
Max pipe arguments: 0
Max pipe active reservations: 0
Max pipe packet size: 0
Max global variable size: 0
Max global variable preferred total size: 0
Max read/write image args: 0
Max on device events: 0
Queue on device max size: 0
Max on device queues: 0
Queue on device preferred size: 0
SVM capabilities:
Coarse grain buffer: No
Fine grain buffer: No
Fine grain system: No
Atomics: No
Preferred platform atomic alignment: 0
Preferred global atomic alignment: 0
Preferred local atomic alignment: 0
Kernel Preferred work group size multiple: 64
Error correction support: 0
Unified memory for Host and Device: 0
Profiling timer resolution: 1
Device endianess: Little
Available: Yes
Compiler available: Yes
Execution capabilities:
Execute OpenCL kernels: Yes
Execute native function: No
Queue on Host properties:
Out-of-Order: No
Profiling : Yes
Queue on Device properties:
Out-of-Order: No
Profiling : No
Platform ID: 0x7f5f5a3c69f0
Name: Ellesmere
Vendor: Advanced Micro Devices, Inc.
Device OpenCL C version: OpenCL C 1.2
Driver version: 2639.3
Profile: FULL_PROFILE
Version: OpenCL 1.2 AMD-APP (2639.3)
Extensions: cl_khr_fp64 cl_amd_fp64 cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_int64_base_atomics cl_khr_int64_extended_atomics cl_khr_3d_image_writes cl_khr_byte_addressable_store cl_khr_fp16 cl_khr_gl_sharing cl_amd_device_attribute_query cl_amd_vec3 cl_amd_printf cl_amd_media_ops cl_amd_media_ops2 cl_amd_popcnt cl_khr_image2d_from_buffer cl_khr_spir cl_khr_gl_event
amd.txt configuration file extract
"gpu_threads_conf" : [
// gpu: Ellesmere memory:3135
// compute units: 36
{ "index" : 0,
"intensity" : 864, "worksize" : 8,
"affine_to_cpu" : false, "strided_index" : 1, "mem_chunk" : 2,
"comp_mode" : true
},
What I've tried:
Nothing worked untill now. Any ideas?
Thank you
Bests,
Michele
The text was updated successfully, but these errors were encountered: