build(deps-dev): Bump esbuild from 0.17.14 to 0.17.15

[dependabot]

Bumps esbuild from 0.17.14 to 0.17.15.

Release notes

Sourced from esbuild's releases.

v0.17.15

• Allow keywords as type parameter names in mapped types (#3033)

  TypeScript allows type keywords to be used as parameter names in mapped types. Previously esbuild incorrectly treated this as an error. Code that does this is now supported:

  type Foo = 'a' | 'b' | 'c'
  type A = { [keyof in Foo]: number }
  type B = { [infer in Foo]: number }
  type C = { [readonly in Foo]: number }

• Add annotations for re-exported modules in node (#2486, #3029)

  Node lets you import named imports from a CommonJS module using ESM import syntax. However, the allowed names aren't derived from the properties of the CommonJS module. Instead they are derived from an arbitrary syntax-only analysis of the CommonJS module's JavaScript AST.

  To accommodate node doing this, esbuild's ESM-to-CommonJS conversion adds a special non-executable "annotation" for node that describes the exports that node should expose in this scenario. It takes the form 0 && (module.exports = { ... }) and comes at the end of the file (0 && expr means expr is never evaluated).

  Previously esbuild didn't do this for modules re-exported using the export * from syntax. Annotations for these re-exports will now be added starting with this release:

  // Original input
  export { foo } from './foo'
  export * from './bar'
  // Old output (with --format=cjs --platform=node)
  ...
  0 && (module.exports = {
  foo
  });
  // New output (with --format=cjs --platform=node)
  ...
  0 && (module.exports = {
  foo,
  ...require("./bar")
  });

  Note that you need to specify both --format=cjs and --platform=node to get these node-specific annotations.

• Avoid printing an unnecessary space in between a number and a . (#3026)

  JavaScript typically requires a space in between a number token and a . token to avoid the . being interpreted as a decimal point instead of a member expression. However, this space is not required if the number token itself contains a decimal point, an exponent, or uses a base other than 10. This release of esbuild now avoids printing the unnecessary space in these cases:

  // Original input
  foo(1000 .x, 0 .x, 0.1 .x, 0.0001 .x, 0xFFFF_0000_FFFF_0000 .x)
  // Old output (with --minify)

... (truncated)

Changelog

Sourced from esbuild's changelog.

0.17.15

• Allow keywords as type parameter names in mapped types (#3033)

  TypeScript allows type keywords to be used as parameter names in mapped types. Previously esbuild incorrectly treated this as an error. Code that does this is now supported:

  type Foo = 'a' | 'b' | 'c'
  type A = { [keyof in Foo]: number }
  type B = { [infer in Foo]: number }
  type C = { [readonly in Foo]: number }

• Add annotations for re-exported modules in node (#2486, #3029)

  Node lets you import named imports from a CommonJS module using ESM import syntax. However, the allowed names aren't derived from the properties of the CommonJS module. Instead they are derived from an arbitrary syntax-only analysis of the CommonJS module's JavaScript AST.

  To accommodate node doing this, esbuild's ESM-to-CommonJS conversion adds a special non-executable "annotation" for node that describes the exports that node should expose in this scenario. It takes the form 0 && (module.exports = { ... }) and comes at the end of the file (0 && expr means expr is never evaluated).

  Previously esbuild didn't do this for modules re-exported using the export * from syntax. Annotations for these re-exports will now be added starting with this release:

  // Original input
  export { foo } from './foo'
  export * from './bar'
  // Old output (with --format=cjs --platform=node)
  ...
  0 && (module.exports = {
  foo
  });
  // New output (with --format=cjs --platform=node)
  ...
  0 && (module.exports = {
  foo,
  ...require("./bar")
  });

  Note that you need to specify both --format=cjs and --platform=node to get these node-specific annotations.

• Avoid printing an unnecessary space in between a number and a . (#3026)

  JavaScript typically requires a space in between a number token and a . token to avoid the . being interpreted as a decimal point instead of a member expression. However, this space is not required if the number token itself contains a decimal point, an exponent, or uses a base other than 10. This release of esbuild now avoids printing the unnecessary space in these cases:

  // Original input
  foo(1000 .x, 0 .x, 0.1 .x, 0.0001 .x, 0xFFFF_0000_FFFF_0000 .x)

... (truncated)

Commits

• ef91289 publish 0.17.15 to npm
• f780ad3 fix #3027: live reload SSE when outdir is /
• fa974c2 close #3026: remove unneeded spaces after numbers
• b86e581 fix #2486, fix #3029: node re-export annotations
• 9fbf1fd fix #3033: mapped type parameters can be keywords
• See full diff in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

[flexdevelopment]

lgtm 👍🏾

[flexdevelopment]

lgtm 👍🏾

[flexdevelopment]

lgtm 👍🏾

[codecov]

Codecov Report

Merging #179 (672d3c2) into main (f1decde) will not change coverage.
The diff coverage is n/a.

Additional details and impacted files

@@            Coverage Diff            @@
##              main      #179   +/-   ##
=========================================
  Coverage   100.00%   100.00%           
=========================================
  Files           21        21           
  Lines         2071      2071           
  Branches       132       132           
=========================================
  Hits          2071      2071           

Flag	Coverage Δ
node14	100.00% <ø> (ø)
node16	100.00% <ø> (ø)
node18	100.00% <ø> (ø)
node19	100.00% <ø> (ø)

Components	Coverage Δ
config	100.00% <ø> (ø)
internal	100.00% <ø> (ø)
plugins	100.00% <ø> (ø)
utils	100.00% <ø> (ø)

---

Continue to review full report in Codecov by Sentry.

Legend - Click here to learn more
Δ = absolute <relative> (impact), ø = not affected, ? = missing data
Powered by Codecov. Last update d248a7a...672d3c2. Read the comment docs.

[github-actions]

This pull request has been automatically locked since there has not been any recent
activity after it was closed. Please open a new issue for related bugs or features. Be
sure to reference this issue.