.travis.yml

#
# Copyright 2016 Pixar
#
# Licensed under the Apache License, Version 2.0 (the "Apache License")
# with the following modification; you may not use this file except in
# compliance with the Apache License and the following modification to it:
# Section 6. Trademarks. is deleted and replaced with:
#
# 6. Trademarks. This License does not grant permission to use the trade
#    names, trademarks, service marks, or product names of the Licensor
#    and its affiliates, except as required to comply with Section 4(c) of
#    the License and to reproduce the content of the NOTICE file.
#
# You may obtain a copy of the Apache License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the Apache License with the above modification is
# distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied. See the Apache License for the specific
# language governing permissions and limitations under the Apache License.
#

# USD requires several dependencies that are available via
# apt-get if using the trusty build environment.
sudo: required
dist: trusty

language: cpp

branches:
  only:
    - master
    - dev

before_install:
  - sudo apt-get -qq update

install:
  ######
  ### DEPENDENCIES FOR USD CORE
  #####

  ### boost v1.55
  ### We install only the packages we need for faster turnaround
  - sudo apt-get install libboost-iostreams1.55.0 libboost-iostreams1.55-dev
  - sudo apt-get install libboost-python1.55.0 libboost-python1.55-dev
  - sudo apt-get install libboost-regex1.55.0 libboost-regex1.55-dev
  - sudo apt-get install libboost-system1.55.0 libboost-system1.55-dev
  - sudo apt-get install libboost-program-options1.55.0 libboost-program-options1.55-dev

  ### double-conversion
  ### USD docs currently claim we require 1.1.1, but apt-get gives us 2.0.1 on trusty.
  ### Building 1.1.1 as a shared library is annoying, so we'll go with this for now.
  - sudo apt-get install libdouble-conversion-dev

  ### Intel TBB v4.3 update 1
  - if [ ! -d "$HOME/tbb43_20141023oss/lib" ]; then
      wget https://www.threadingbuildingblocks.org/sites/default/files/software_releases/linux/tbb43_20141023oss_lin.tgz -O /tmp/tbb.tgz;
      tar -xvzf /tmp/tbb.tgz -C $HOME;
    else
      echo 'Using cached TBB';
    fi

  ### ilmbase and OpenEXR 2.2.0
  - if [ ! -d "$HOME/openexr/lib" ]; then
      wget http://download.savannah.nongnu.org/releases/openexr/ilmbase-2.2.0.tar.gz -O /tmp/ilmbase.tgz;
      tar -xvzf /tmp/ilmbase.tgz -C $HOME;
      pushd $HOME/ilmbase-2.2.0;
      ./configure --prefix=$HOME/openexr;
      make && make install;
      popd;
      wget http://download.savannah.nongnu.org/releases/openexr/openexr-2.2.0.tar.gz -O /tmp/openexr.tgz;
      tar -xvzf /tmp/openexr.tgz -C $HOME;
      pushd $HOME/openexr-2.2.0;
      ./configure --prefix=$HOME/openexr --with-pkg-config=no LDFLAGS="-Wl,-rpath -Wl,$HOME/openexr/lib";
      make && make install;
      popd;
    else
      echo 'Using cached OpenEXR';
    fi

  ######
  ### DEPENDENCIES FOR IMAGING
  #####

  ### GLEW 1.10.0
  - sudo apt-get install libglew-dev

  ### OpenSubdiv 3.0.5
  - sudo apt-get install libxrandr-dev libxcursor-dev libxinerama-dev libglfw-dev
  - if [ ! -d "$HOME/osd/lib" ]; then
      wget https://github.com/PixarAnimationStudios/OpenSubdiv/archive/v3_0_5.tar.gz -O /tmp/osd.tgz;
      tar -xvzf /tmp/osd.tgz -C $HOME;
      pushd $HOME/OpenSubdiv-3_0_5;
      mkdir build && cd build;
      cmake -DCMAKE_INSTALL_PREFIX=$HOME/osd -DNO_EXAMPLES=1 -DNO_TUTORIALS=1 -DNO_REGRESSION=1 -D NO_MAYA=1 -D NO_PTEX=1 -D NO_DOC=1 -D NO_OMP=1 -D NO_TBB=1 -D NO_CUDA=1 -D NO_OPENCL=1 -D NO_CLEW=1 ..;
      make && make install;
      popd;
    else
      echo 'Using cached OpenSubdiv';
    fi

  ### OpenImageIO 1.5.11
  - sudo apt-get install libboost-filesystem1.55.0 libboost-filesystem1.55-dev
  - sudo apt-get install libboost-thread1.55.0 libboost-thread1.55-dev
  - if [ ! -d "$HOME/oiio/lib" ]; then
      wget https://github.com/OpenImageIO/oiio/archive/Release-1.5.11.tar.gz -O /tmp/oiio.tgz;
      tar -xvzf /tmp/oiio.tgz -C $HOME;
      pushd $HOME/oiio-Release-1.5.11;
      mkdir build && cd build;
      cmake -DCMAKE_INSTALL_PREFIX=$HOME/oiio -DILMBASE_HOME=$HOME/openexr -DOPENEXR_HOME=$HOME/openexr ..;
      make && make install;
      popd;
    else
      echo 'Using cached OpenImageIO';
    fi

  ### Ptex 2.0.30
  - if [ ! -d "$HOME/ptex/lib" ]; then
      wget https://github.com/wdas/ptex/archive/v2.0.30.tar.gz -O /tmp/ptex.tgz;
      tar -xvzf /tmp/ptex.tgz -C $HOME;
      pushd $HOME/ptex-2.0.30/src;
      make;
      mv $HOME/ptex-2.0.30/install/* $HOME/ptex;
      popd;
    else
      echo 'Using cached Ptex';
    fi

  ######
  ### DEPENDENCIES FOR USDIMAGING
  #####

  ### PySide 1.2.2
  - sudo apt-get install python-pyside pyside-tools

cache:
  directories:
    - $HOME/openexr
    - $HOME/osd
    - $HOME/oiio
    - $HOME/ptex
    - $HOME/tbb43_20141023oss

script:
  - mkdir build && cd build
  - cmake -DTBB_ROOT_DIR=$HOME/tbb43_20141023oss -DOPENEXR_LOCATION=$HOME/openexr -DOIIO_LOCATION=$HOME/oiio -DOPENSUBDIV_ROOT_DIR=$HOME/osd -DPTEX_LOCATION=$HOME/ptex -DPXR_VALIDATE_GENERATED_CODE=OFF ..
  - echo 'Building with -j4'
  - make -j4
  # Default install location is /usr/local; we need sudo access to write there.
  - sudo make install