ebs-autoscale

#!/bin/sh
# Copyright Amazon.com, Inc. or its affiliates.
#
#  Redistribution and use in source and binary forms, with or without
#  modification, are permitted provided that the following conditions are met:
#
#  1. Redistributions of source code must retain the above copyright notice,
#  this list of conditions and the following disclaimer.
#
#  2. Redistributions in binary form must reproduce the above copyright
#  notice, this list of conditions and the following disclaimer in the
#  documentation and/or other materials provided with the distribution.
#
#  3. Neither the name of the copyright holder nor the names of its
#  contributors may be used to endorse or promote products derived from
#  this software without specific prior written permission.
#
#  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
#  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
#  BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
#  FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
#  THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
#  INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
#  (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
#  SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
#  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
#  IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
#  POSSIBILITY OF SUCH DAMAGE.

. /usr/local/amazon-ebs-autoscale/shared/utils.sh

initialize

MIN_EBS_VOLUME_SIZE=$(get_config_value .limits.min_ebs_volume_size)
MAX_EBS_VOLUME_SIZE=$(get_config_value .limits.max_ebs_volume_size)
MAX_LOGICAL_VOLUME_SIZE=$(get_config_value .limits.max_logical_volume_size)
MAX_EBS_VOLUME_COUNT=$(get_config_value .limits.max_ebs_volume_count)
INITIAL_UTILIZATION_THRESHOLD=$(get_config_value .limits.initial_utilization_threshold)

FILE_SYSTEM=$(get_config_value .filesystem)

LVM_VG=$(get_config_value .lvm.volume_group)
LVM_LV=$(get_config_value .lvm.logical_volume)

MOUNTPOINT=$(get_config_value .mountpoint)
BASEDIR=$(dirname $0)

starting
trap "stopping; exit" INT TERM KILL

logthis "EBS Autoscaling mountpoint: ${MOUNTPOINT}"
logthis "Region = $AWS_REGION"
logthis "Availability Zone = $AWS_AZ"

# make sure that this device is mounted.
until [ -d "${MOUNTPOINT}" ]; do
  sleep 1
done

get_num_devices() {
  # This tag is added to all devices attached by this ebs-autoscale in the create-ebs-volume script it's presence indicates
  # a device that has been added by auto-expansion rather than an EBS volume attached for other reasons or at startup.
  TAG=amazon-ebs-autoscale-creation-time

  # determine the number of devices attached by ebs-autoscale on this instance. Volumes attached in other ways are
  # excluded as they aren't relevant to autoscaling
  local attached_volumes=""
  local max_attempts=5

  # By waiting until the attached_volumes value is >=0 we will retry with backoff hopefully avoiding request limits
  # eventually getting a usable value. The >= 0 test is really a test that we got an integer response
  for i in $(eval echo "{0..$max_attempts}") ; do
      local attached_volumes_response=""

      attached_volumes_response=$(
        aws ec2 describe-volumes \
            --region $AWS_REGION \
            --filters Name=attachment.instance-id,Values=$INSTANCE_ID Name=tag-key,Values=$TAG
       )

      attached_volumes=$(echo "$attached_volumes_response" | jq '.Volumes | length')
      if [ "$attached_volumes" -ge 0 ]; then
          break
      fi

      if [ $i -eq $max_attempts ] ; then
        logthis "Could not determine the number of attached_volumes after $i attempts. Last response was: $attached_volumes_response"
        break
      fi

      sleep $(( 2 ** i + $RANDOM %3 ))
  done

  echo "$attached_volumes"
}

calc_threshold() {
  # calculates percent utilization threshold for adding additional ebs volumes
  # as more ebs volumes are added, the threshold level increases

  local num_devices=$1
  local threshold=${INITIAL_UTILIZATION_THRESHOLD}

  if [ "$num_devices" -ge "4" ] && [ "$num_devices" -le "6" ]; then
    threshold=80
  elif [ "$num_devices" -gt "6" ] && [ "$num_devices" -le "10" ]; then
    threshold=90
  elif [ "$num_devices" -gt "10" ]; then
    threshold=90
  else
    threshold=${INITIAL_UTILIZATION_THRESHOLD}
  fi

  echo ${threshold}
}

calc_new_size() {
  # calculates the size to use for new ebs volumes to expand space
  # new volume sizes increase as the number of attached volumes increase
  local num_devices=$1
  #local num_devices=$(get_num_devices)
  local new_size=$MIN_EBS_VOLUME_SIZE

  if [ "$num_devices" -ge "4" ] && [ "$num_devices" -le "6" ]; then
    if [ "$MAX_EBS_VOLUME_SIZE" -ge "299" ] && [ "$MIN_EBS_VOLUME_SIZE" -le "299" ]; then
      new_size=300
    elif [ "$MIN_EBS_VOLUME_SIZE" -ge "299" ]; then
      new_size=$MIN_EBS_VOLUME_SIZE
    else
      new_size=$MAX_EBS_VOLUME_SIZE
    fi
  elif [ "$num_devices" -gt "6" ] && [ "$num_devices" -le "10" ]; then
    if [ "$MAX_EBS_VOLUME_SIZE" -ge "999" ] && [ "$MIN_EBS_VOLUME_SIZE" -le "999" ]; then
      new_size=1000
    elif [ "$MIN_EBS_VOLUME_SIZE" -ge "999" ]; then
      new_size=$MIN_EBS_VOLUME_SIZE
    else
      new_size=$MAX_EBS_VOLUME_SIZE
    fi
  elif [ "$num_devices" -gt "10" ]; then
    new_size=$MAX_EBS_VOLUME_SIZE
  else
    if [ "$MAX_EBS_VOLUME_SIZE" -ge "149" ]; then
      new_size=$MIN_EBS_VOLUME_SIZE
    else
      new_size=$MAX_EBS_VOLUME_SIZE
    fi
  fi

  echo ${new_size}
}

add_space () {
  #local num_devices=$(get_num_devices)
  local num_devices=$1
  if [ "${num_devices}" -ge "$MAX_EBS_VOLUME_COUNT" ]; then
    logthis "No more volumes can be safely added."
    return 0
  fi

  local curr_size=$(df -BG ${MOUNTPOINT} | grep ${MOUNTPOINT} | awk '{print $2} ' | cut -d'G' -f1)
  if [ "${curr_size}" -lt "$MAX_LOGICAL_VOLUME_SIZE" ]; then
    local vol_size=$(calc_new_size ${num_devices})
    logthis "Extending logical volume ${MOUNTPOINT} by ${vol_size}GB"

    DEVICE=$(${BASEDIR}/create-ebs-volume --size ${vol_size} --max-attached-volumes ${MAX_EBS_VOLUME_COUNT})

    exit_status=$?
    if [ $exit_status -eq 0 ]; then
      if [ "${FILE_SYSTEM}" = "btrfs" ]; then
        logthis "Adding device ${DEVICE} to logical volume ${MOUNTPOINT}"
        btrfs device add ${DEVICE} ${MOUNTPOINT}
        btrfs balance start -m ${MOUNTPOINT}
      else
        logthis "Adding device ${DEVICE} to logical volume /dev/mapper/${LVM_VG}-${LVM_LV}"
        vgextend ${LVM_VG} ${DEVICE}
        lvresize -l 100%VG /dev/mapper/${LVM_VG}-${LVM_LV}
        resize2fs /dev/mapper/${LVM_VG}-${LVM_LV}
      fi
      logthis "Finished extending logical volume"

    else
      logthis "Error creating or attaching EBS volume"
    fi

  else
    logthis "Maximum volume size ($MAX_LOGICAL_VOLUME_SIZE) reached"
  fi
}

# number of event loops between utilization status log lines
# helps to limit the log file size
# utilization detection is not affected by this
LOG_INTERVAL=$(get_config_value .logging.log_interval)

# initialized value for log lines
# report on first run
LOG_COUNT=$LOG_INTERVAL

# time in seconds between event loops
# keep this low so that rapid increases in utilization are detected
DETECTION_INTERVAL=$(get_config_value .detection_interval)
# get the number of devices once when the script first starts
NUM_DEVICES=$(get_num_devices)
THRESHOLD=$(calc_threshold "${NUM_DEVICES}")
while true; do

  STATS=$(df -BG  ${MOUNTPOINT} | grep -v Filesystem)
  TOTAL_SIZE=$(echo ${STATS} | awk '{print $2}')
  USED=$(echo ${STATS} | awk '{print $3}')
  AVAILABLE=$(echo ${STATS} | awk '{print $4}')
  PCT_UTILIZATION=$(echo ${STATS} | awk '{print $5}' | cut -d"%" -f1 -)
  if  [ $PCT_UTILIZATION -ge "${THRESHOLD}" ]; then
    # get number of devices only when we need to add more space
  	NUM_DEVICES=$(get_num_devices)
    logthis "LOW DISK (${PCT_UTILIZATION}%): Adding more."
    add_space "$NUM_DEVICES"
	NUM_DEVICES=$(expr $NUM_DEVICES + 1 )
    THRESHOLD=$(calc_threshold "$NUM_DEVICES")
    LOG_COUNT=$LOG_INTERVAL
  fi
  if [ "${LOG_COUNT}" -ge "${LOG_INTERVAL}" ]; then
    logthis "Devices ${NUM_DEVICES} : Size ${TOTAL_SIZE} : Used ${USED} : Available ${AVAILABLE} : Used% ${PCT_UTILIZATION}% : Threshold ${THRESHOLD}%"
    LOG_COUNT=0
  fi
  LOG_COUNT=$(expr $LOG_COUNT + 1 )
  sleep $DETECTION_INTERVAL
done