Two instances of sketch running after startup

[spiderdab]

Hi, I don't know if it's 'uploadtopi' related problem, but as soon as I upload a sketch it works perfectly, instead as I reboot the raspberry, and the sketch run autonomously, the sketch behave strangely...
the sketch uses the http request library to send message as a telegram bot, and normally it works ok.
But if the sketch autorun after a reboot, the sketch sends two time the same message every time.
Do you have any idea?
Thanks.

[gohai]

Is it possible that the sketch is being executed twice?

Could you attach the content of ~/.config/lxsession/LXDE-pi/autostart, as well as .config/lxsession/LXDE-pi/processing.sh? The output of ps -All after startup would also be interesting.

[spiderdab]

Hi and thank you for your attention.
the files seem to be ok:
cat .config/lxsession/LXDE-pi/autostart
.config/lxsession/LXDE-pi/processing.sh --uploadtopi-managed
and..
cat .config/lxsession/LXDE-pi/processing.sh
./Telegram_Bot_4_dabberry/Telegram_Bot_4_dabberry --uploadtopi-managed >>./Telegram_Bot_4_dabberry/Telegram_Bot_4_dabberry.log 2>&1
while in fact there are 2 processes running together:
ps -All | grep Telegram
0 S 1000 3066 3065 0 80 0 - 441 wait ? 00:00:00 Telegram_Bot_4_ 0 S 1000 3192 3190 0 80 0 - 441 wait ? 00:00:00 Telegram_Bot_4_
but I can't figure out what can make it run twice...

[gohai]

Odd. What happens if you remove the line from autostart? Does one of the two still launch?

Does killing both (killall java) and launching the sketch from the terminal (DISPLAY=:0 ./Telegram_Bot_4_dabberry/Telegram_Bot_4_dabberry) also spawn two instances?

[spiderdab]

I just tried to killall both processes and run the sketch from the terminal, and I still have double messages.
If instead I remove the line from autostart using ## before, I don't have any process and in fact I have no response in telegram.

[spiderdab]

so this seems to depend from the sketch, but why I have two twin processes?
and also as I upload the sketch using your tool, it runs ok.

[gohai]

What happens if you replace the content of the sketch with a dummy sketch (just empty setup and draw), and upload it via the tool and the same name?

Does it still spawn two instances?

[spiderdab]

Hi, I've tried a new empty sketch with just one println"something"; command in the setup.
Same result: as soon as I upload it runs correctly, then if I reboot i can see two processes with the same name.

[gohai]

And you're testing on a vanilla (unmodified) Raspbian image?

One idea that I had: perhaps your window manager re-opens the applications automatically, that were open at shutdown? Does it also appear when you make sure the sketches have terminated before you restart?