This is a simple StepCounter/Pedometer for FlipperZero using a Memsic2125 module.
Thanks to @jamisonderek for the tutorial on how to implement Memsic2125 module on Flipper Zero, and for the support.
| Mx2125 | Name | Purpose | Flipper |
|---|---|---|---|
| Pin 1 | Tout | Temperature Out | not connected |
| Pin 2 | Yout | Y-axis PWM Out (100Hz, duty cycle = value) | C0 |
| Pin 3 | GND | Ground | GND |
| Pin 4 | GND | Ground | GND |
| Pin 5 | Xout | X-axis PWM Out (100Hz, duty cycle = value) | C1 |
| Pin 6 | Vdd | Drain voltage (3.3V to 5V DC) | 3v3 |
TODO List:
- Add an INFO window with the link to the original Repo and the Pinout connection between the Flipper Zero and the Memsic Mx2125 module
- Add a simple animation of a Dolphin Runner
- Add a management of the possible errors
- Add the possibility to restart the counting
- Add the possibility to set a daily/weekly GOAL to reach
- Add the possibility to save dayly results in files at the path: apps_data/stepcounter