Reviung 53 - stacked acrylic case

[kh411d]

Hi, I would like to print my self the acrylic plate, but after checking the reviung53_2mm_450x300_ver1.1.svg file, I have a question about whether it is already in the correct size width, and height? and I still need to print the top plate and the bottom plate but can't figure out which size should I follow for printing the acrylic, I realize the bottom plate have these notes on the pdf W:262.05mm H:114.413mm and the top plate from Gerber file have a different trailing number tho but basically the same 262x114

[kbrock]

The top plate, pcb, and bottom plate should be the same size on the outside. The cutout for the power switch and pro micro are the main differences.

You may want to check out the files for 39, 39s, and 41 to see if those numbers match up for you. Pretty sure they are all the same as far as the top dimensions. M2 holes look close. Also, I do not have a mkii, but it looks close in the pictures.

Good luck. These are great keyboards.

Please share how it worked after you print this.

[gtips]

I've been away from GitHub for a while.
Sorry for the late response.

SVG files do not output the correct size depending on the application you use to open them, so please zoom in or out to adjust the size.

We recommend using dxf or ai files.