servoarms.txt

 
Cost
Machine time cost is 0.07$.
Material cost is 0.04$.
Total cost is 0.12$.
 
Extent
X axis extrusion starts at -16 mm and ends at 16 mm, for a width of 32 mm.
Y axis extrusion starts at -7 mm and ends at 7 mm, for a depth of 13 mm.
Z axis extrusion starts at 0 mm and ends at 11 mm, for a height of 10 mm.
 
Extruder
Build time is 4 minutes 29 seconds.
Distance extruded is 21121.1 mm.
Distance traveled is 24772.7 mm.
Extruder speed is 55.0
Extruder was extruding 85.3 percent of the time.
Extruder was toggled 846 times.
Operating flow rate is 9.2 mm3/s.
Feed rate average is 92.1 mm/s, (5523.2 mm/min).
 
Filament
Cross section area is 0.092 mm2.
Extrusion diameter is 0.34 mm.
Volume fraction is 0.82.
 
Material
Mass extruded is 2.1 grams.
Volume extruded is 1.9 cc.
 
Meta
Text has 19332 lines and a size of 755.0 KB.
Version is 12.03.14
 
Procedures
carve
bottom
preface
inset
fill
speed
temperature
jitter
clip
fillet
dimension
alteration
 
Profile
Ultimaker-ABS
 
Slice
Edge width is 0.45 mm.
Layer height is 0.25 mm.