Z-Wave.me RaZberry 7 Pro refusing request to change RF region and power setting

[judo16]

Problem/Motivation

• Using a TubesZB-ZW PoE unit with a Z-Wave.me RaZberry 7 Pro module.
• Connection is over IP
• Home Assistant connects to the Z-Wave module and communicates with it, however is unable to change certain settings.
• When the attempting to set power level and RF region, the request fails.

Expected behavior

Expecting the radio to settings to be changed to correct RF region and power level.

Actual behavior

(What actually happened)

​
Filter logs
Type to filter logs, case sensitive
2024-12-09 10:36:46.834 INFO GATEWAY: Closing Gateway...
2024-12-09 10:36:46.835 INFO GATEWAY: Driver is CLOSED
2024-12-09 10:36:46.839 INFO Z-WAVE-SERVER: Client disconnected
2024-12-09 10:36:46.844 INFO Z-WAVE-SERVER: Server closed
2024-12-09T02:36:46.844Z DRIVER destroying driver instance...
2024-12-09T02:36:46.849Z DRIVER driver instance destroyed
2024-12-09 10:36:46.850 INFO Z-WAVE: Client closed
2024-12-09 10:36:46.854 INFO MQTT: MQTT is disabled
2024-12-09 10:36:46.855 INFO BACKUP: Backup job started with cron: 0 0 * * *. Next run: 12/10/2024, 12:00:00 AM
2024-12-09 10:36:46.856 INFO BACKUP: Backup job started with cron: 0 0 * * *. Next run: 12/10/2024, 12:00:00 AM
2024-12-09 10:36:46.862 INFO Z-WAVE: Connecting to tcp://192.168.4.114:6638
2024-12-09 10:36:46.865 INFO Z-WAVE: Setting user callbacks
2024-12-09T02:36:46.866Z DRIVER ███████╗ ██╗ ██╗ █████╗ ██╗ ██╗ ███████╗ ██╗ ███████╗
╚══███╔╝ ██║ ██║ ██╔══██╗ ██║ ██║ ██╔════╝ ██║ ██╔════╝
███╔╝ █████╗ ██║ █╗ ██║ ███████║ ██║ ██║ █████╗ ██║ ███████╗
███╔╝ ╚════╝ ██║███╗██║ ██╔══██║ ╚██╗ ██╔╝ ██╔══╝ ██ ██║ ╚════██║
███████╗ ╚███╔███╔╝ ██║ ██║ ╚████╔╝ ███████╗ ╚█████╔╝ ███████║
╚══════╝ ╚══╝╚══╝ ╚═╝ ╚═╝ ╚═══╝ ╚══════╝ ╚════╝ ╚══════╝
2024-12-09T02:36:46.867Z DRIVER version 14.3.7
2024-12-09T02:36:46.867Z DRIVER
2024-12-09T02:36:46.868Z DRIVER starting driver...
2024-12-09T02:36:46.868Z DRIVER opening serial port tcp://192.168.4.114:6638
2024-12-09T02:36:46.873Z DRIVER serial port opened
2024-12-09T02:36:46.874Z SERIAL » 0x15 (1 bytes)
2024-12-09 10:36:46.875 INFO Z-WAVE: Zwavejs usage statistics ENABLED
2024-12-09 10:36:46.876 WARN Z-WAVE: Zwavejs driver is not ready yet, statistics will be enabled on driver initialization
2024-12-09 10:36:46.877 INFO BACKUP: Backup job started with cron: 0 0 * * *. Next run: 12/10/2024, 12:00:00 AM
2024-12-09 10:36:46.878 INFO BACKUP: Backup job started with cron: 0 0 * * *. Next run: 12/10/2024, 12:00:00 AM
2024-12-09 10:36:46.881 INFO APP: POST /api/settings 200 49.119 ms - 2283
2024-12-09 10:36:46.915 INFO APP: GET /api/auth-enabled 304 1.784 ms - -
2024-12-09T02:36:47.883Z DRIVER loading configuration...
2024-12-09T02:36:47.886Z CONFIG Using external configuration dir /data/db
2024-12-09T02:36:47.886Z CONFIG version 14.3.7
2024-12-09 10:36:48.447 INFO ZNIFFERMANAGER: Retrying in 5s...
2024-12-09T02:36:48.834Z DRIVER beginning interview...
2024-12-09T02:36:48.835Z DRIVER added request handler for AddNodeToNetwork (0x4a)...
1 registered
2024-12-09T02:36:48.836Z DRIVER added request handler for RemoveNodeFromNetwork (0x4b)...
1 registered
2024-12-09T02:36:48.836Z DRIVER added request handler for ReplaceFailedNode (0x63)...
1 registered
2024-12-09T02:36:48.836Z DRIVER added request handler for SetLearnMode (0x50)...
1 registered
2024-12-09T02:36:48.837Z CNTRLR querying Serial API capabilities...
2024-12-09T02:36:48.841Z SERIAL » 0x01030007fb (5 bytes)
2024-12-09T02:36:48.842Z DRIVER » [REQ] [GetSerialApiCapabilities]
2024-12-09T02:36:48.869Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:48.871Z SERIAL « 0x012b0107071c014704010101fe873e88cf3fc04ffbd7fde00700008000808680b (45 bytes)
a05007000802f7f0000fa00ef
2024-12-09T02:36:48.872Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:48.873Z DRIVER « [RES] [GetSerialApiCapabilities]
2024-12-09T02:36:48.875Z CNTRLR received API capabilities:
firmware version: 7.28
manufacturer ID: 0x0147
product type: 0x0401
product ID: 0x0101
supported functions:
· GetSerialApiInitData (0x02)
· SetApplicationNodeInformation (0x03)
· ApplicationCommand (0x04)
· GetControllerCapabilities (0x05)
· SetSerialApiTimeouts (0x06)
· GetSerialApiCapabilities (0x07)
· SoftReset (0x08)
· GetProtocolVersion (0x09)
· SerialAPIStarted (0x0a)
· SerialAPISetup (0x0b)
· SetRFReceiveMode (0x10)
· SendNodeInformation (0x12)
· SendData (0x13)
· SendDataMulticast (0x14)
· GetControllerVersion (0x15)
· SendDataAbort (0x16)
· FUNC_ID_ZW_GET_RANDOM (0x1c)
· GetControllerId (0x20)
· UNKNOWN_FUNC_MEMORY_GET_BYTE (0x21)
· UNKNOWN_FUNC_MEMORY_PUT_BYTE (0x22)
· UNKNOWN_FUNC_MEMORY_GET_BUFFER (0x23)
· UNKNOWN_FUNC_MEMORY_PUT_BUFFER (0x24)
· EnterBootloader (0x27)
· UNKNOWN_FUNC_UNKNOWN_0x28 (0x28)
· GetNVMId (0x29)
· ExtNVMReadLongBuffer (0x2a)
· ExtNVMWriteLongBuffer (0x2b)
· ExtNVMReadLongByte (0x2c)
· ExtExtWriteLongByte (0x2d)
· NVMOperations (0x2e)
· ClearTxTimers (0x37)
· GetTxTimers (0x38)
· ClearNetworkStats (0x39)
· GetNetworkStats (0x3a)
· GetBackgroundRSSI (0x3b)
· SetListenBeforeTalkThreshold (0x3c)
· RemoveSpecificNodeIdFromNetwork (0x3f)
· GetNodeProtocolInfo (0x41)
· HardReset (0x42)
· FUNC_ID_ZW_REPLICATION_COMMAND_COMPLETE (0x44)
· FUNC_ID_ZW_REPLICATION_SEND_DATA (0x45)
· AssignReturnRoute (0x46)
· DeleteReturnRoute (0x47)
· RequestNodeNeighborUpdate (0x48)
· ApplicationUpdateRequest (0x49)
· AddNodeToNetwork (0x4a)
· RemoveNodeFromNetwork (0x4b)
· AddPrimaryController (0x4d)
· AssignPriorityReturnRoute (0x4f)
· SetLearnMode (0x50)
· AssignSUCReturnRoute (0x51)
· RequestNetworkUpdate (0x53)
· SetSUCNodeId (0x54)
· DeleteSUCReturnRoute (0x55)
· GetSUCNodeId (0x56)
· SendSUCNodeId (0x57)
· AssignPrioritySUCReturnRoute (0x58)
· ExploreRequestInclusion (0x5e)
· ExploreRequestExclusion (0x5f)
· RequestNodeInfo (0x60)
· RemoveFailedNode (0x61)
· IsFailedNode (0x62)
· ReplaceFailedNode (0x63)
· GetRoutingInfo (0x80)
· LockUnlockLastRoute (0x90)
· GetPriorityRoute (0x92)
· SetPriorityRoute (0x93)
· UNKNOWN_FUNC_UNKNOWN_0x98 (0x98)
· VirtualNodeSetNodeInfo (0xa0)
· VirtualNodeSendNodeInfo (0xa2)
· VirtualNodeSetLearnMode (0xa4)
· GetVirtualNodes (0xa5)
· IsVirtualNode (0xa6)
· BridgeApplicationCommand (0xa8)
· SendDataBridge (0xa9)
· SendDataMulticastBridge (0xab)
· GetLibrary (0xbd)
· SendTestFrame (0xbe)
· GetProtocolStatus (0xbf)
· FUNC_ID_ZW_SET_PROMISCUOUS_MODE (0xd0)
· FUNC_ID_PROMISCUOUS_APPLICATION_COMMAND_HANDLER (0xd1)
· StartWatchdog (0xd2)
· StopWatchdog (0xd3)
· SetMaximumRoutingAttempts (0xd4)
· SetMaxSmartStartInclusionRequestInterval (0xd6)
· Shutdown (0xd9)
· GetLongRangeNodes (0xda)
· GetLongRangeChannel (0xdb)
· SetLongRangeChannel (0xdc)
· SetLongRangeShadowNodeIDs (0xdd)
· Proprietary_DE (0xde)
· Proprietary_DF (0xdf)
· Proprietary_F2 (0xf2)
· Proprietary_F4 (0xf4)
· Proprietary_F5 (0xf5)
· Proprietary_F6 (0xf6)
· Proprietary_F7 (0xf7)
· Proprietary_F8 (0xf8)
2024-12-09T02:36:48.876Z CNTRLR querying additional controller information...
2024-12-09T02:36:48.880Z SERIAL » 0x01030002fe (5 bytes)
2024-12-09T02:36:48.881Z DRIVER » [REQ] [GetSerialApiInitData]
2024-12-09T02:36:49.077Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:49.079Z SERIAL « 0x0125010209081d010000000000000000000000000000000000000000000000000 (39 bytes)
00000000700c3
2024-12-09T02:36:49.080Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:49.081Z DRIVER « [RES] [GetSerialApiInitData]
2024-12-09T02:36:49.083Z CNTRLR received additional controller information:
Z-Wave API version: 9 (legacy)
Z-Wave chip type: EFR32ZG14 / ZGM130S
node type Controller
controller role: primary
controller is the SIS: true
controller supports timers: false
Z-Wave Classic nodes: 1
2024-12-09T02:36:49.084Z CNTRLR querying version info...
2024-12-09T02:36:49.087Z SERIAL » 0x01030015e9 (5 bytes)
2024-12-09T02:36:49.087Z DRIVER » [REQ] [GetControllerVersion]
2024-12-09T02:36:49.318Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:49.320Z SERIAL « 0x011001155a2d5761766520372e3137000791 (18 bytes)
2024-12-09T02:36:49.321Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:49.322Z DRIVER « [RES] [GetControllerVersion]
2024-12-09T02:36:49.324Z CNTRLR received version info:
controller type: Bridge Controller
library version: Z-Wave 7.17
2024-12-09T02:36:49.325Z CNTRLR querying protocol version info...
2024-12-09T02:36:49.327Z SERIAL » 0x01030009f5 (5 bytes)
2024-12-09T02:36:49.327Z DRIVER » [REQ] [GetProtocolVersion]
2024-12-09T02:36:49.568Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:49.570Z SERIAL « 0x01190109000711020196303030303030303030303030303030306d (27 bytes)
2024-12-09T02:36:49.571Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:49.572Z DRIVER « [RES] [GetProtocolVersion]
2024-12-09T02:36:49.574Z CNTRLR received protocol version info:
protocol type: Z-Wave
protocol version: 7.17.2
appl. framework build no.: 406
git commit hash: 30303030303030303030303030303030
2024-12-09T02:36:49.574Z CNTRLR querying controller capabilities...
2024-12-09T02:36:49.576Z SERIAL » 0x01030005f9 (5 bytes)
2024-12-09T02:36:49.577Z DRIVER » [REQ] [GetControllerCapabilities]
2024-12-09T02:36:49.816Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:49.817Z SERIAL « 0x010401053cc3 (6 bytes)
2024-12-09T02:36:49.818Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:49.819Z DRIVER « [RES] [GetControllerCapabilities]
2024-12-09T02:36:49.820Z CNTRLR received controller capabilities:
controller role: Primary
is the SUC: true
started this network: true
SIS is present: true
was real primary: true
2024-12-09T02:36:49.821Z CNTRLR querying serial API setup capabilities...
2024-12-09T02:36:49.823Z SERIAL » 0x0104000b01f1 (6 bytes)
2024-12-09T02:36:49.823Z DRIVER » [REQ] [SerialAPISetup]
command: GetSupportedCommands
payload: 0x01
2024-12-09T02:36:50.065Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:50.067Z SERIAL « 0x0116010b01fe3e0103000100000001000000000000000121 (24 bytes)
2024-12-09T02:36:50.068Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:50.069Z DRIVER « [RES] [SerialAPISetup]
command: GetSupportedCommands
2024-12-09T02:36:50.071Z CNTRLR supported serial API setup commands:
· GetSupportedCommands
· SetTxStatusReport
· SetLongRangeMaximumTxPower
· SetPowerlevel
· GetLongRangeMaximumTxPower
· GetPowerlevel
· GetMaximumPayloadSize
· GetLongRangeMaximumPayloadSize
· GetRFRegion
· SetRFRegion
· SetNodeIDType
2024-12-09T02:36:50.071Z CNTRLR querying max. payload size...
2024-12-09T02:36:50.074Z SERIAL » 0x0104000b10e0 (6 bytes)
2024-12-09T02:36:50.074Z DRIVER » [REQ] [SerialAPISetup]
command: GetMaximumPayloadSize
payload: 0x10
2024-12-09T02:36:50.312Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:50.314Z SERIAL « 0x0105010b102ece (7 bytes)
2024-12-09T02:36:50.315Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:50.316Z DRIVER « [RES] [SerialAPISetup]
command: GetMaximumPayloadSize
maximum payload size: 46 bytes
2024-12-09T02:36:50.317Z CNTRLR maximum payload size: 46 bytes
2024-12-09T02:36:50.318Z CNTRLR supported Z-Wave features:
· SmartStart
2024-12-09T02:36:50.318Z CNTRLR Querying configured RF region...
2024-12-09T02:36:50.321Z SERIAL » 0x0104000b20d0 (6 bytes)
2024-12-09T02:36:50.321Z DRIVER » [REQ] [SerialAPISetup]
command: GetRFRegion
payload: 0x20
2024-12-09T02:36:50.570Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:50.571Z SERIAL « 0x0105010b20fe2e (7 bytes)
2024-12-09T02:36:50.572Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:50.573Z DRIVER « [RES] [SerialAPISetup]
command: GetRFRegion
region: Unknown
2024-12-09T02:36:50.575Z CNTRLR The controller is using RF region Unknown
2024-12-09T02:36:50.575Z CNTRLR Current RF region (Unknown) differs from desired region (Australia/New Zealand
), configuring it...
2024-12-09T02:36:50.577Z SERIAL » 0x0105000b4002b3 (7 bytes)
2024-12-09T02:36:50.578Z DRIVER » [REQ] [SerialAPISetup]
command: SetRFRegion
region: Australia/New Zealand
2024-12-09T02:36:50.818Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:50.820Z SERIAL « 0x0105010b4000b0 (7 bytes)
2024-12-09T02:36:50.820Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:50.821Z DRIVER « [RES] [SerialAPISetup]
command: SetRFRegion
success: false
2024-12-09T02:36:50.823Z CNTRLR The controller response indicated failure after 1/3 attempts. Scheduling next
try in 100 ms.
2024-12-09T02:36:50.924Z DRIVER » [REQ] [SerialAPISetup]
command: SetRFRegion
region: Australia/New Zealand
2024-12-09T02:36:50.925Z SERIAL » 0x0105000b4002b3 (7 bytes)
2024-12-09T02:36:51.066Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:51.068Z SERIAL « 0x0105010b4000b0 (7 bytes)
2024-12-09T02:36:51.068Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:51.069Z DRIVER « [RES] [SerialAPISetup]
command: SetRFRegion
success: false
2024-12-09T02:36:51.071Z CNTRLR The controller response indicated failure after 2/3 attempts. Scheduling next
try in 1100 ms.
2024-12-09T02:36:52.173Z DRIVER » [REQ] [SerialAPISetup]
command: SetRFRegion
region: Australia/New Zealand
2024-12-09T02:36:52.174Z SERIAL » 0x0105000b4002b3 (7 bytes)
2024-12-09T02:36:52.189Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:52.190Z SERIAL « 0x0105010b4000b0 (7 bytes)
2024-12-09T02:36:52.191Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:52.192Z DRIVER « [RES] [SerialAPISetup]
command: SetRFRegion
success: false
2024-12-09T02:36:52.195Z CNTRLR Changing the RF region failed!
2024-12-09T02:36:52.195Z CNTRLR Querying configured powerlevel...
2024-12-09T02:36:52.198Z SERIAL » 0x0104000b08f8 (6 bytes)
2024-12-09T02:36:52.198Z DRIVER » [REQ] [SerialAPISetup]
command: GetPowerlevel
payload: 0x08
2024-12-09T02:36:52.318Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:52.319Z SERIAL « 0x0106010b080002f9 (8 bytes)
2024-12-09T02:36:52.320Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:52.321Z DRIVER « [RES] [SerialAPISetup]
command: GetPowerlevel
normal powerlevel: 0.0 dBm
output power at 0 dBm: 0.2 dBm
2024-12-09T02:36:52.324Z CNTRLR Current powerlevel 0 dBm (0.2 dBm) differs from desired powerlevel 5 dBm (0 dB
m), configuring it...
2024-12-09T02:36:52.327Z SERIAL » 0x0106000b043200c4 (8 bytes)
2024-12-09T02:36:52.327Z DRIVER » [REQ] [SerialAPISetup]
command: SetPowerlevel
normal powerlevel: 5.0 dBm
output power at 0 dBm: 0.0 dBm
2024-12-09T02:36:52.564Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:52.566Z SERIAL « 0x0105010b0400f4 (7 bytes)
2024-12-09T02:36:52.566Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:52.568Z DRIVER « [RES] [SerialAPISetup]
command: SetPowerlevel
success: false
2024-12-09T02:36:52.569Z CNTRLR The controller response indicated failure after 1/3 attempts. Scheduling next
try in 100 ms.
2024-12-09T02:36:52.671Z DRIVER » [REQ] [SerialAPISetup]
command: SetPowerlevel
normal powerlevel: 5.0 dBm
output power at 0 dBm: 0.0 dBm
2024-12-09T02:36:52.672Z SERIAL » 0x0106000b043200c4 (8 bytes)
2024-12-09T02:36:52.815Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:52.816Z SERIAL « 0x0105010b0400f4 (7 bytes)
2024-12-09T02:36:52.817Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:52.818Z DRIVER « [RES] [SerialAPISetup]
command: SetPowerlevel
success: false
2024-12-09T02:36:52.820Z CNTRLR The controller response indicated failure after 2/3 attempts. Scheduling next
try in 1100 ms.
2024-12-09 10:36:53.449 INFO ZNIFFERMANAGER: Retrying in 5s...
2024-12-09T02:36:53.922Z DRIVER » [REQ] [SerialAPISetup]
command: SetPowerlevel
normal powerlevel: 5.0 dBm
output power at 0 dBm: 0.0 dBm
2024-12-09T02:36:53.923Z SERIAL » 0x0106000b043200c4 (8 bytes)
2024-12-09T02:36:53.941Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:53.942Z SERIAL « 0x0105010b0400f4 (7 bytes)
2024-12-09T02:36:53.943Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:53.944Z DRIVER « [RES] [SerialAPISetup]
command: SetPowerlevel
success: false
2024-12-09T02:36:53.946Z CNTRLR Changing the powerlevel failed!
2024-12-09T02:36:53.947Z CNTRLR Querying configured max. Long Range powerlevel...
2024-12-09T02:36:53.949Z SERIAL » 0x0104000b05f5 (6 bytes)
2024-12-09T02:36:53.950Z DRIVER » [REQ] [SerialAPISetup]
command: GetLongRangeMaximumTxPower
payload: 0x05
2024-12-09T02:36:54.070Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:54.071Z SERIAL « 0x0106010b050002f4 (8 bytes)
2024-12-09T02:36:54.072Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:54.073Z DRIVER « [RES] [SerialAPISetup]
command: GetLongRangeMaximumTxPower
max. TX power (LR): 0.2 dBm
2024-12-09T02:36:54.076Z CNTRLR The max. LR powerlevel is 0.2 dBm
2024-12-09T02:36:54.077Z CNTRLR Querying configured Long Range channel information...
2024-12-09T02:36:54.081Z SERIAL » 0x010300db27 (5 bytes)
2024-12-09T02:36:54.082Z DRIVER » [REQ] [GetLongRangeChannel]
2024-12-09T02:36:54.320Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:54.321Z SERIAL « 0x010401db0021 (6 bytes)
2024-12-09T02:36:54.322Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:54.323Z DRIVER « [RES] [GetLongRangeChannel]
2024-12-09T02:36:54.324Z CNTRLR received Z-Wave Long Range channel information:
channel: Unsupported
supports auto channel selection: false
2024-12-09T02:36:54.325Z CNTRLR Performing soft reset...
2024-12-09T02:36:54.327Z SERIAL » 0x01030008f4 (5 bytes)
2024-12-09T02:36:54.328Z DRIVER » [REQ] [SoftReset]
2024-12-09T02:36:54.566Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:54.568Z CNTRLR Waiting for the controller to reconnect...
2024-12-09T02:36:54.569Z DRIVER all queues idle
2024-12-09T02:36:54.802Z SERIAL « 0x0112000a0700010100085e989f556c568f740025 (20 bytes)
2024-12-09T02:36:54.803Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:54.804Z DRIVER « [REQ] [SerialAPIStarted]
wake up reason: SoftwareReset
watchdog enabled: false
generic device class: 0x01
specific device class: 0x00
always listening: false
supports Long Range: false
2024-12-09T02:36:54.804Z CNTRLR reconnected and restarted
2024-12-09T02:36:54.805Z CNTRLR Starting hardware watchdog...
2024-12-09T02:36:54.806Z CNTRLR Switching serial API to 16-bit node IDs...
2024-12-09T02:36:54.807Z CNTRLR Switching serial API to 8-bit node IDs...
2024-12-09T02:36:54.808Z DRIVER one or more queues busy
2024-12-09T02:36:54.810Z SERIAL » 0x010300d22e (5 bytes)
2024-12-09T02:36:54.810Z DRIVER » [REQ] [StartWatchdog]
2024-12-09T02:36:54.814Z SERIAL » 0x0105000b800273 (7 bytes)
2024-12-09T02:36:54.815Z DRIVER » [REQ] [SerialAPISetup]
command: SetNodeIDType
node ID type: 16 bit
2024-12-09T02:36:55.063Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:55.065Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:55.065Z SERIAL « 0x0105010b800171 (7 bytes)
2024-12-09T02:36:55.066Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:55.067Z DRIVER « [RES] [SerialAPISetup]
command: SetNodeIDType
success: true
2024-12-09T02:36:55.069Z CNTRLR Switching to 16-bit node IDs successful
2024-12-09T02:36:55.072Z SERIAL » 0x0105000b800170 (7 bytes)
2024-12-09T02:36:55.072Z DRIVER » [REQ] [SerialAPISetup]
command: SetNodeIDType
node ID type: 8 bit
2024-12-09T02:36:55.315Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:55.316Z SERIAL « 0x0105010b800171 (7 bytes)
2024-12-09T02:36:55.317Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:55.318Z DRIVER « [RES] [SerialAPISetup]
command: SetNodeIDType
success: true
2024-12-09T02:36:55.320Z CNTRLR Switching to 8-bit node IDs successful
2024-12-09T02:36:55.320Z CNTRLR querying controller IDs...
2024-12-09T02:36:55.322Z SERIAL » 0x01030020dc (5 bytes)
2024-12-09T02:36:55.322Z DRIVER » [REQ] [GetControllerId]
2024-12-09T02:36:55.561Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:55.563Z SERIAL « 0x01080120d01b19ed01e8 (10 bytes)
2024-12-09T02:36:55.563Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:55.564Z DRIVER « [RES] [GetControllerId]
home ID: 0xd01b19ed
own node ID: 1
2024-12-09T02:36:55.566Z CNTRLR received controller IDs:
home ID: 0xd01b19ed
own node ID: 1
2024-12-09T02:36:55.567Z CNTRLR Enabling TX status report...
2024-12-09T02:36:55.569Z SERIAL » 0x0105000b02ff0c (7 bytes)
2024-12-09T02:36:55.570Z DRIVER » [REQ] [SerialAPISetup]
command: SetTxStatusReport
enabled: true
2024-12-09T02:36:55.818Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:55.820Z SERIAL « 0x0105010b0201f3 (7 bytes)
2024-12-09T02:36:55.821Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:55.821Z DRIVER « [RES] [SerialAPISetup]
command: SetTxStatusReport
success: true
2024-12-09T02:36:55.823Z CNTRLR Enabling TX status report successful...
2024-12-09T02:36:55.823Z CNTRLR finding SUC...
2024-12-09T02:36:55.826Z SERIAL » 0x01030056aa (5 bytes)
2024-12-09T02:36:55.826Z DRIVER » [REQ] [GetSUCNodeId]
2024-12-09T02:36:56.066Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:56.067Z SERIAL « 0x0104015601ad (6 bytes)
2024-12-09T02:36:56.068Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:56.069Z DRIVER « [RES] [GetSUCNodeId]
2024-12-09T02:36:56.071Z CNTRLR This is the SUC
2024-12-09T02:36:56.072Z DRIVER all queues idle
2024-12-09T02:36:56.086Z DRIVER Cache file for homeId 0xd01b19ed found, attempting to restore the network from
cache...
2024-12-09T02:36:56.091Z CNTRLR [Node 001] Embedded device config loaded
2024-12-09T02:36:56.092Z DRIVER Restoring the network from cache was successful!
2024-12-09T02:36:56.093Z CNTRLR [Node 001] [Manufacturer Specific] manufacturerId: metadata updated
2024-12-09T02:36:56.094Z CNTRLR [Node 001] [Manufacturer Specific] productType: metadata updated
2024-12-09T02:36:56.095Z CNTRLR [Node 001] [Manufacturer Specific] productId: metadata updated
2024-12-09T02:36:56.096Z CNTRLR [Node 001] [] [Manufacturer Specific] manufacturerId: 327 => 327
2024-12-09T02:36:56.096Z CNTRLR [Node 001] [] [Manufacturer Specific] productType: 1025 => 1025
2024-12-09T02:36:56.097Z CNTRLR [Node 001] [] [Manufacturer Specific] productId: 257 => 257
2024-12-09T02:36:56.098Z CNTRLR [Node 001] [Version] firmwareVersions: metadata updated
2024-12-09T02:36:56.098Z CNTRLR [Node 001] [] [Version] firmwareVersions: 7.28 => 7.28
2024-12-09T02:36:56.099Z CNTRLR [Node 001] [Version] zWaveProtocolVersion: metadata updated
2024-12-09T02:36:56.099Z CNTRLR [Node 001] [] [Version] zWaveProtocolVersion: "7.17.2" => "7.17.2"
2024-12-09T02:36:56.100Z CNTRLR [Node 001] [Version] sdkVersion: metadata updated
2024-12-09T02:36:56.100Z CNTRLR [Node 001] [] [Version] sdkVersion: "7.17.2" => "7.17.2"
2024-12-09T02:36:56.101Z CNTRLR Interview completed
2024-12-09T02:36:56.101Z DRIVER Network key for S0 configured, enabling S0 security manager...
2024-12-09T02:36:56.102Z DRIVER At least one network key for S2 configured, enabling S2 security manager...
2024-12-09T02:36:56.104Z DRIVER At least one network key for Z-Wave Long Range configured, enabling security m
anager...
2024-12-09T02:36:56.107Z DRIVER driver ready
2024-12-09 10:36:56.107 INFO GATEWAY: Driver is READY
2024-12-09 10:36:56.108 INFO Z-WAVE: Z-Wave driver is ready
2024-12-09 10:36:56.108 INFO Z-WAVE: Controller status: Driver ready
2024-12-09T02:36:56.108Z DRIVER Checking for configuration updates...
2024-12-09 10:36:56.112 INFO Z-WAVE: Scanning network with homeid: 0xd01b19ed
2024-12-09 10:36:56.113 INFO Z-WAVE: [Node 001] Is alive
2024-12-09T02:36:56.114Z CNTRLR [Node 001] The node is alive.
2024-12-09 10:36:56.117 INFO Z-WAVE: [Node 001] Ready: Z-Wave.me - RaZberry 7 Pro (Z-Wave Shield with External Antenna)
2024-12-09T02:36:56.117Z CNTRLR [Node 001] The node is ready to be used
2024-12-09T02:36:56.118Z CNTRLR All nodes are ready to be used
2024-12-09 10:36:56.118 INFO Z-WAVE: Controller status: Scan completed
2024-12-09 10:36:56.119 INFO Z-WAVE: Network scan complete. Found: 1 nodes
2024-12-09T02:36:56.120Z DRIVER one or more queues busy
2024-12-09T02:36:56.127Z SERIAL » 0x0104000b08f8 (6 bytes)
2024-12-09T02:36:56.128Z DRIVER » [REQ] [SerialAPISetup]
command: GetPowerlevel
payload: 0x08
2024-12-09 10:36:56.142 INFO Z-WAVE-SERVER: ZwaveJS server listening on :3000
2024-12-09 10:36:56.151 INFO Z-WAVE: Z-Wave server started
2024-12-09T02:36:56.316Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:56.317Z SERIAL « 0x0106010b080002f9 (8 bytes)
2024-12-09T02:36:56.318Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:56.320Z DRIVER « [RES] [SerialAPISetup]
command: GetPowerlevel
normal powerlevel: 0.0 dBm
output power at 0 dBm: 0.2 dBm
2024-12-09T02:36:56.323Z SERIAL » 0x0104000b20d0 (6 bytes)
2024-12-09T02:36:56.324Z DRIVER » [REQ] [SerialAPISetup]
command: GetRFRegion
payload: 0x20
2024-12-09T02:36:56.563Z SERIAL « [ACK] (0x06)
2024-12-09T02:36:56.565Z SERIAL « 0x0105010b20fe2e (7 bytes)
2024-12-09T02:36:56.565Z SERIAL » [ACK] (0x06)
2024-12-09T02:36:56.566Z DRIVER « [RES] [SerialAPISetup]
command: GetRFRegion
region: Unknown
2024-12-09T02:36:56.570Z DRIVER all queues idle
2024-12-09T02:36:56.754Z DRIVER No configuration update available...
2024-12-09 10:36:56.755 INFO Z-WAVE: Next update scheduled for: Tue Dec 10 2024 00:00:00 GMT+0800 (Australian Western Standard Time)
2024-12-09 10:36:57.120 INFO Z-WAVE-SERVER: DNS Service Discovery enabled
2024-12-09 10:36:58.450 INFO ZNIFFERMANAGER: Retrying in 5s...
2024-12-09 10:36:58.478 INFO APP: GET /health/zwave 301 0.721 ms - 162
2024-12-09T02:37:00.510Z DRIVER Usage statistics sent - next transmission scheduled in 23 hours.
2024-12-09T02:37:01.572Z DRIVER one or more queues busy
2024-12-09T02:37:01.574Z SERIAL » 0x0103003bc7 (5 bytes)
2024-12-09T02:37:01.575Z DRIVER » [REQ] [GetBackgroundRSSI]
2024-12-09T02:37:01.583Z SERIAL « [ACK] (0x06)
2024-12-09T02:37:01.585Z SERIAL « 0x0107013ba09c9c7f1d (9 bytes)
2024-12-09T02:37:01.586Z SERIAL » [ACK] (0x06)
2024-12-09T02:37:01.588Z DRIVER « [RES] [GetBackgroundRSSI]
channel 0: -96 dBm
channel 1: -100 dBm
channel 2: -100 dBm
channel 3: N/A
2024-12-09T02:37:01.590Z DRIVER all queues idle
2024-12-09 10:37:03.452 INFO ZNIFFERMANAGER: Retrying in 5s...
2024-12-09 10:37:08.454 INFO ZNIFFERMANAGER: Retrying in 5s...
2024-12-09 10:37:13.456 INFO ZNIFFERMANAGER: Retrying in 5s...
2024-12-09 10:37:18.460 INFO ZNIFFERMANAGER: Retrying in 5s...
2024-12-09 10:37:23.462 INFO ZNIFFERMANAGER: Retrying in 5s...
2024-12-09 10:37:28.464 INFO ZNIFFERMANAGER: Retrying in 5s...
2024-12-09 10:37:28.533 INFO APP: GET /health/zwave 301 0.878 ms - 162
2024-12-09T02:37:31.572Z DRIVER one or more queues busy
2024-12-09T02:37:31.576Z SERIAL » 0x0103003bc7 (5 bytes)
2024-12-09T02:37:31.577Z DRIVER » [REQ] [GetBackgroundRSSI]
2024-12-09T02:37:31.592Z SERIAL « [ACK] (0x06)
2024-12-09T02:37:31.593Z SERIAL « 0x0107013b9f9a9a7f22 (9 bytes)
2024-12-09T02:37:31.597Z SERIAL » [ACK] (0x06)
2024-12-09T02:37:31.599Z DRIVER « [RES] [GetBackgroundRSSI]
channel 0: -97 dBm
channel 1: -102 dBm
channel 2: -102 dBm
channel 3: N/A
2024-12-09T02:37:31.602Z DRIVER all queues idle
2024-12-09 10:37:33.466 INFO ZNIFFERMANAGER: Retrying in 5s...

(How can someone else make/see it happen)

• Use the equipment noted above

(If you have a proposed change, workaround or fix,
describe the rationale behind it)

Are the correct commands being used? See link from the z-wave.me website.
https://z-wave.me/download/changezwf.sh

'changezwf'

Changes operating frequency for Z-Wave.Me UZB Device

if [ $# -lt 2 ]
then
echo "Usage : $0 USB_Port Country_Code"
exit
fi

case $2 in
EU)
echo 'Switch to European Frequency (848.4 ... 869 MHz)'
echo -ne "\x01\x04\x00\xF2\x00\x09" > $1 ;;
RU)
echo 'Switch to Russian Frequency (869 MHz)'
echo -ne "\x01\x04\x00\xF2\x01\x08" > $1 ;;
IN)
echo 'Switch to India Frequency (865.2 MHz)'
echo -ne "\x01\x04\x00\xF2\x02\x07" > $1 ;;
US)
echo 'Switch to North/South American Frequency (908 MHz ... 916 MHz)'
echo -ne "\x01\x04\x00\xF2\x03\x06" > $1 ;;
ANZ)
echo 'Switch to Frequency for Australia/New Zealand/Brasil/Peru (919 MHz ... 921 MHz)'
echo -ne "\x01\x04\x00\xF2\x04\x05" > $1 ;;
HK)
echo 'Switch to Hongkong Frequency (919 MHz)'
echo -ne "\x01\x04\x00\xF2\x05\x04" > $1 ;;
CN)
echo 'Switch to PR China Frequency (868 MHz)'
echo -ne "\x01\x04\x00\xF2\x06\x03" > $1 ;;
JP)
echo 'Switch to Japanese/Taiwanese Frequency (922-926 MHz)'
echo -ne "\x01\x04\x00\xF2\x07\x02" > $1 ;;
KR)
echo 'Switch to Korean Frequency (919 ... 923 MHz)'
echo -ne "\x01\x04\x00\xF2\x08\x01" > $1 ;;
IL)
echo 'Switch to Israel Frequency (915 ... 917 MHz)'
echo -ne "\x01\x04\x00\xF2\x09\x00" > $1 ;;
MY)
echo 'Switch to Malaysia Frequency (868 MHz)'
echo -ne "\x01\x04\x00\xF2\x0a\x03" > $1 ;;
*)
echo "Country Code $2 is not valid. Try EU|RU|IN|US|ANZ|HK|CN|JP|KR|IL|MY" ;;

esac