Home Assistant OS 10.1

[agners]

Home Assistant Operating System

• Bump buildroot to fix bluetoothctl segfault (Bump buildroot to fix bluetoothctl segfault #2509) @agners
• Enable Gasket driver for Google Coral support on ODROID-M1 (Coral PCI tpu modules not available for Odroid M1 #2504) (Enable Gasket driver for Google Coral support on ODROID-M1 (#2504) #2508) @agners
• Avoid CLI restart on shutdown (Avoid CLI restart on shutdown #2507) @agners
• Bump buildroot to update systemd to 252.9 (Bump buildroot to update systemd to 252.9 #2506) @agners
• Fix qemu guest agent startup by using BindTo and After (10.0 Failed to start QEMU Guest Agent when rebooted from Proxmox HyperVisor #2496) (Fix qemu guest agent startup by using BindTo and After (#2496) #2503) @agners

Raspberry Pi

• Fix boot on Raspberry Pi 4 32-bit (Raspberry PI 4 cannot boot from SD after upgrade to 10 #2500) (Fix boot on Raspberry Pi 4 32-bit (#2500) #2505) @agners
• Fix NVMe SSD boot for Raspberry Pi 4/CM4 (Fail to boot after Upgrade to 10.0 CM4 NVMe #2479) (Fix NVMe SSD boot for Raspberry Pi 4/CM4 (#2479) #2493) @agners

Open Virtual Appliance

• Fix startup by using BindTo and After (10.0 Failed to start QEMU Guest Agent when rebooted from Proxmox HyperVisor #2496) (Fix qemu guest agent startup by using BindTo and After (#2496) #2503) @agners
• Linux: Update kernel 6.1.25 (Linux: Update kernel 6.1.25 #2495) @agners

Generic x86-64

• Linux: Update kernel 6.1.25 (Linux: Update kernel 6.1.25 #2495) @agners

Hardkernel ODROID

• Enable Gasket driver for Google Coral support on ODROID-M1 (Coral PCI tpu modules not available for Odroid M1 #2504) (Enable Gasket driver for Google Coral support on ODROID-M1 (#2504) #2508) @agners
• Linux: Update kernel 6.1.25 (Linux: Update kernel 6.1.25 #2495) @agners

ASUS Tinker

• Linux: Update kernel 6.1.25 (Linux: Update kernel 6.1.25 #2495) @agners

Khadas VIM Series

• Enable HDMI on Khadas VIM3 (Enable HDMI on Khadas VIM3 #2491) @agners

Generic aarch64

• Linux: Update kernel 6.1.25 (Linux: Update kernel 6.1.25 #2495) @agners

---

This discussion was created from the release Home Assistant OS 10.1.

[ikke-zelf]

Any news on hardkernel building support for booting from NVMe with ODROID M1?
Or is that never going to happen?

[ThWedum]

HA would not start after updating. "Wait Until Kernel Time Synchronized" fails on boot. Reverting to some older image that i had from before (8.5) resolved my issue.
Running HA on a laptop

[agners]

That sounds like an internet connectivity issue: HAOS tries to synchronize time with an NTP server, by default with time.cloudflare.com at startup.

[ThWedum]

Any idea how the internet connectivity changes when i use different releases? Tried first updating to 10.1 trough HA. That is when it started.
Also tried to clean install 10.1 to see if that did anything (but no difference). I can't wrap my head around this behavior.

[agners]

Temporary outage? Maybe systemd-resolved got more picky with DNS, and your local DNS/your providers DNS mangles requests such that systemd-resolved doesn't like it?

Honestly, not sure what this is, but we have 70k plus users where it seems to work... So it must some local environment + HAOS 10.1 interaction issue...

[ThWedum]

Tried this over the span of three days before giving up and downgrading. I understand that this might be a edge case. I don’t expect anyone to dedicate time to my issue as long as I’m the only one reporting it. Still thought it could be important to write it down just in case that I’m not alone.

[mcpingvin]

Is it just me, or did this update break Tuya integration?

After re-adding the integration since it is just gone (with all cloud and user data), when adding a Tuya device it asks for the credentials again and doesn't offer any devices.

[agners]

This is very unlikely HAOS related, as it just provides the basis to run Home Assistant Core. Maybe you did a HA Core update at the same time?

If you still suspect HAOS, you can downgrade it back to ha os update --version 9.5 to verify if that resolves the issue.

[mcpingvin]

No, I've just updated it and now and it's when the problem started. Core was updated a few days ago.

I'll try to downgrade and comment back.

[mcpingvin]

I think I've found the culprit, expired trial: home-assistant/core#91654 (comment)

Thanks for the help!