You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I tried to install HAOS utilizing a Live Ubuntu USB stick and the haos_generic-x86-64-13.1 image starting from scratch. I also was running HAOS in an ancient Intel NUC NUC6CAYB with a Celeron J3455 processor and a SATA SSD.
When trying to boot, it does not go further than the following error messages:
xhci_hcd 0000:00:14.0: Error while assigning device slot ID: Command Aborted
xhci_hcd 0000:00:14.0: Max number of devices this xHCI host support is 64.
usb usb1-port4: couldn't allocate usb_device
xhci_hcd 0000:00:14.0: Error while assigning device slot ID: Command Aborted
xhci_hcd 0000:00:14.0: Max number of devices this xHCI host support is 64.
usb usb2-port2: couldn't allocate usb_device
xhci_hcd 0000:00:14.0: Error while assigning device slot ID: Command Aborted
xhci_hcd 0000:00:14.0: Max number of devices this xHCI host support is 64.
usb usb1-port6: couldn't allocate usb_device
xhci_hcd 0000:00:14.0: Error while assigning device slot ID: Command Aborted
xhci_hcd 0000:00:14.0: Max number of devices this xHCI host support is 64.
usb usb1-port7: couldn't allocate usb_device
xhci_hcd 0000:00:14.0: Error while assigning device slot ID: Command Aborted
xhci_hcd 0000:00:14.0: Max number of devices this xHCI host support is 64.
usb usb1-port10: couldn't allocate usb_device
nvme nvme0: I/O 20 QID 0 timeout, completion polled
nvme nvme0: I/O 21 QID 0 timeout, completion polled
nvme nvme0: I/O 22 QID 0 timeout, completion polled
vnvme nvme0: allocated 64 MiB host memory buffer.
nvme nvme0: I/O 23 QID 0 timeout, completion polled
nvme nvme0: I/O 20 QID 0 timeout, completion polled
nvme nvme0: I/O 21 QID 0 timeout, completion polled
nvme nvme0: I/O 22 QID 0 timeout, completion polled
nvme nvme0: I/O 20 QID 0 timeout, completion polled
name nvme0: 1/0/0 defaul/read/poll queues
nvme nvme0: I/O 21 QID 0 timeout, completion polled
nvme nvme0: I/O 21 QID 0 timeout, completion polled
....
The boot up log keep returning these same errors over and over if restarted. I tried to physically remove the SATA SSD that I had in my old NUC, inserted in a USB 3 case and tried to boot with the HAOS that is up and running already, and it also freezes at the very same point during boot sequence, throwing the same errors.
This issue seems to be tied to the Linux Kernel version that HAOS runs. Some people with similar hardware was able to boot by disabling Intel VT-d, but Beelink BIOS for this mini-pc does now allow to turn this off.
The closest issue I could find was the link below - which did not provide much info other than possible Linux kernel incompatibilities with newer hardware.
Describe the issue you are experiencing
I tried to install HAOS utilizing a Live Ubuntu USB stick and the haos_generic-x86-64-13.1 image starting from scratch. I also was running HAOS in an ancient Intel NUC NUC6CAYB with a Celeron J3455 processor and a SATA SSD.
When trying to boot, it does not go further than the following error messages:
The boot up log keep returning these same errors over and over if restarted. I tried to physically remove the SATA SSD that I had in my old NUC, inserted in a USB 3 case and tried to boot with the HAOS that is up and running already, and it also freezes at the very same point during boot sequence, throwing the same errors.
This issue seems to be tied to the Linux Kernel version that HAOS runs. Some people with similar hardware was able to boot by disabling Intel VT-d, but Beelink BIOS for this mini-pc does now allow to turn this off.
The closest issue I could find was the link below - which did not provide much info other than possible Linux kernel incompatibilities with newer hardware.
https://forum.qubes-os.org/t/installer-does-not-boot-nvme-timeout-completion-polled/13639
What operating system image do you use?
generic-x86-64 (Generic UEFI capable x86-64 systems)
What version of Home Assistant Operating System is installed?
13.1
Did the problem occur after upgrading the Operating System?
No
Hardware details
Steps to reproduce the issue
...
Anything in the Supervisor logs that might be useful for us?
Anything in the Host logs that might be useful for us?
System information
No response
Additional information
No response
The text was updated successfully, but these errors were encountered: