Skip to content

Latest commit

 

History

History
90 lines (67 loc) · 3.94 KB

README.md

File metadata and controls

90 lines (67 loc) · 3.94 KB
Raw

panther_rutx11

Description

Network configuration scripts for RUTX11 router inside Panther. Enables quick way to set WiFi client, WiFi access-point, cellular (LTE), GNSS, Husarnet network and more. Scripts are compatible with Teltonika RUTX11 with firmware version ≥ RUTX_R_00.07.02.

WiFi behavior

Client Mode

Panther can be connected to the existing WiFi network on either 2.4GHz or 5GHz using it as an uplink. Multiple SSID can be set, the router will prioritize them in descending order.

Access-point (STA mode)

In default configuration on both radios (2.4 GHz & 5 GHz) access-point is enabled with SSID Panther_XXXX and Panther_5G_XXXX, where XXXX is serial number of Panther. SSID, password, enabled radios can be changed via WebUI.

Configuration

Configuration is stored in config.json file using extended version of JSON, which enables comments and advanced error messages. To apply new configuration, execute setup_wifi.py which is located in the same folder as config.json by command: ./setup_wifi.py.

Configuration options

Config file is divided into sections (arrays), which are listed with possible options as below.

Section name Multiple arrays
wifi_client_radio no
wifi_client yes
cellular yes
gnss no
husarnet no

wifi_client_radio

Set radio to use with Client Mode.

Option Required Default value Description / valid values
wifi_client_radio no 0 0 - 2.4GHz radio used for up-link
1 - 5GHz radio used for up-link

wifi_client

This section can contain multiple arrays of below option:

Option Required Default value Description / valid values
ssid yes - SSID (name) of WiFi network to join.
password no - Password protecting chosen network.
For open encryption not required.
For psk2 length is minimum of 8 characters.

Husarnet

Option Required Default value Description / valid values
hostname yes - Desired hostname in your Husarnet network. Should be unique.
join_code yes - Join code to your Husarnet network. More info how to obtain it is available here

Example config files

Example 1 - single WiFi client on 2.4GHz and connecting to Husarnet

{
    "husarnet":{
        "hostname":"your_desired_hostname",
        "join_code":"your_join_code"
    },
    "wifi_client_radio":0,
    "wifi_client":[

        {
            "radio":"0",
            "ssid":"SSID_of_your_network",
            "password":"password_to_your_network",

        }

    ]
}

Example 2 - two WiFi clients on 5GHz and using different GNSS constellations

{
    "wifi_client_radio":1,
    "wifi_client":[

        {
            "ssid":"SSID_of_your_network",
            "password":"password_to_your_network"
        },
        {
            "ssid":"SSID_of_your_second_network",
            "password":"password_to_your_second_network",
        }


    ]

}