Skip to content

Latest commit

 

History

History
50 lines (31 loc) · 1.41 KB

README.md

File metadata and controls

50 lines (31 loc) · 1.41 KB
Raw

reolink_zone.sh

First of all, thanks to @jasonk for his inspiring script that I simplified for my needs.

reolink_zone.sh is bash script to get, set activation zone of reolink IP cameras with https web interface (E1 zoom, E1 outdoor for example), with activation zones you can simply turn on and off cameras alert, and coupled with home assistant you can arm them when at home and disarm when not, for example.

Setup Credentials

You must create a file .reolink_personal with your credential:

USER="USER"
PASS="PASS" 
declare -A CAMERA
CAMERA["room"]="192.168.1.250"

Sintax

reolink_zone.sh room_name [get|set] zone_name

Get Zone

you can get the current zone status with get command, for example, if your camera at the moment is set with active zones, you can save this status with:

reolink_zone.sh room get enabled

the script will save the actual zone from (room) camera in room_enabled.json.

Set Zone

Converserly you can set the zone with:

reolink_zone.sh room set enabled

the script will load the file room_enabled.json and set it to (room) camera.

To Recap

Once you have saved your "enable", "disable" or "personalized" zone with get, you can switch from one to another with set.