How to add socket BW-SHP13?

[kuzma00]

How to add socket blitzwolf BW-SHP13?
ioBroker.zigbee version 1.4.0

[asgothian]

• Please update to 1.4.1 to verify that it is not covered by the later version and the new exposes
• Verify that the socket is supported in zigbee-herdsman-converters v. 13.0.25.
• in either case, post the tile from the zigbee adapter plus the information window for the device

If the socket is not supported in the herdsman 13.0.25, but supported in the latest, all you need to do is wait for the zigbee Adapter to upgrade to the later herdsman.
If it is not supported in the latest herdsman, please place a device support request here: https://github.com/Koenkk/zigbee-herdsman-converters/issues

A.

[kuzma00]

It is supported in zigbee-herdsman-converters. I updated to the 1.4.1 zigbee. But how I can add this socket to the zigbee adapter ? Any documentation ?

[asgothian]

Please post the tile from the adapter. It should be covered by the "expose" functionality if it is already supported in the herdsman.

The idea is that the exposes remove the need to change the adapter.

A.

[kuzma00]

I can't pair. I have adapter cc2538 and cc2531 and I can't understand what is problem.

[asgothian]

Please check the channel in use, also check if you correctly reset the device to factory defaults. If in doubt, go to one of the ZLL default channels (11,15,20,25).
Even if the device is completely not supported, it has to pair with the zigbee network.

A.

[kuzma00]

Thanks. I changed the channel to 20 and everything works.