Jenkins is the leading open source automation server, Jenkins provides over 1800 plugins to support building, deploying and automating any project.
This chart installs a Jenkins server which spawns agents on Kubernetes utilizing the Jenkins Kubernetes plugin.
Inspired by the awesome work of Carlos Sanchez.
helm repo add jenkins https://charts.jenkins.io
helm repo updateSee helm repo for command documentation.
helm install [RELEASE_NAME] jenkins/jenkins [flags]Since version 5.6.0 the chart is available as an OCI image and can be installed using:
helm install [RELEASE_NAME] oci://ghcr.io/jenkinsci/helm-charts/jenkins [flags]See configuration below.
See helm install for command documentation.
# Helm 3
$ helm uninstall [RELEASE_NAME]This removes all the Kubernetes components associated with the chart and deletes the release.
See helm uninstall for command documentation.
# Helm 3
$ helm upgrade [RELEASE_NAME] jenkins/jenkins [flags]See helm upgrade for command documentation.
Visit the chart's CHANGELOG to view the chart's release history. For migration between major version check migration guide.
The default charts target Long-Term-Support (LTS) releases of Jenkins.
To use other versions the easiest way is to update the image tag to the version you want.
You can also rebuild the chart if you want the appVersion field to match.
See Customizing the Chart Before Installing. To see all configurable options with detailed comments, visit the chart's values.yaml, or run these configuration commands:
# Helm 3
$ helm show values jenkins/jenkinsFor a summary of all configurable options, see VALUES.md.
This chart configured a securityRealm and authorizationStrategy as shown below:
controller:
JCasC:
securityRealm: |-
local:
allowsSignup: false
enableCaptcha: false
users:
- id: "${chart-admin-username}"
name: "Jenkins Admin"
password: "${chart-admin-password}"
authorizationStrategy: |-
loggedInUsersCanDoAnything:
allowAnonymousRead: falseWith the configuration above there is only a single user. This is fine for getting started quickly, but it needs to be adjusted for any serious environment.
So you should adjust this to suite your needs. That could be using LDAP / OIDC / .. as authorization strategy and use globalMatrix as authorization strategy to configure more fine-grained permissions.
This chart allows the user to specify plugins which should be installed. However, for production use cases one should consider to build a custom Jenkins image which has all required plugins pre-installed. This way you can be sure which plugins Jenkins is using when starting up and you avoid trouble in case of connectivity issues to the Jenkins update site.
The docker repository for the Jenkins image contains documentation how to do it.
Here is an example how that can be done:
FROM jenkins/jenkins:lts
RUN jenkins-plugin-cli --plugins kubernetes workflow-aggregator git configuration-as-codeNOTE: If you want a reproducible build then you should specify a non-floating tag for the image jenkins/jenkins:2.249.3 and specify plugin versions.
Once you built the image and pushed it to your registry you can specify it in your values file like this:
controller:
image: "registry/my-jenkins"
tag: "v1.2.3"
installPlugins: falseNotice: installPlugins is set to false to disable plugin download. In this case, the image registry/my-jenkins:v1.2.3 must have the plugins specified as default value for the controller.installPlugins directive to ensure that the configuration side-car system works as expected.
In case you are using a private registry you can use 'imagePullSecretName' to specify the name of the secret to use when pulling the image:
controller:
image: "registry/my-jenkins"
tag: "v1.2.3"
imagePullSecretName: registry-secret
installPlugins: falseIf you are using the ingress definitions provided by this chart via the controller.ingress block the configured hostname will be the ingress hostname starting with https:// or http:// depending on the tls configuration.
The Protocol can be overwritten by specifying controller.jenkinsUrlProtocol.
If you are not using the provided ingress you can specify controller.jenkinsUrl to change the URL definition.
Jenkins Configuration as Code (JCasC) is now a standard component in the Jenkins project.
To allow JCasC's configuration from the helm values, the plugin configuration-as-code must be installed in the Jenkins Controller's Docker image (which is the case by default as specified by the default value of the directive controller.installPlugins).
JCasc configuration is passed through Helm values under the key controller.JCasC.
The section "Jenkins Configuration as Code (JCasC)" of the page "VALUES_SUMMARY.md" lists all the possible directives.
In particular, you may specify custom JCasC scripts by adding sub-key under the controller.JCasC.configScripts for each configuration area where each corresponds to a plugin or section of the UI.
The sub-keys (prior to | character) are only labels used to give the section a meaningful name.
The only restriction is they must conform to RFC 1123 definition of a DNS label, so they may only contain lowercase letters, numbers, and hyphens.
Each key will become the name of a configuration yaml file on the controller in /var/jenkins_home/casc_configs (by default) and will be processed by the Configuration as Code Plugin during Jenkins startup.
The lines after each | become the content of the configuration yaml file.
The first line after this is a JCasC root element, e.g. jenkins, credentials, etc.
Best reference is the Documentation link here: https://<jenkins_url>/configuration-as-code.
The example below sets custom systemMessage:
controller:
JCasC:
configScripts:
welcome-message: |
jenkins:
systemMessage: Welcome to our CI\CD server.More complex example that creates ldap settings:
controller:
JCasC:
configScripts:
ldap-settings: |
jenkins:
securityRealm:
ldap:
configurations:
- server: ldap.acme.com
rootDN: dc=acme,dc=uk
managerPasswordSecret: ${LDAP_PASSWORD}
groupMembershipStrategy:
fromUserRecord:
attributeName: "memberOf"Keep in mind that default configuration file already contains some values that you won't be able to override under configScripts section.
For example, you can not configure Jenkins URL and System Admin email address like this because of conflicting configuration error.
Incorrect:
controller:
JCasC:
configScripts:
jenkins-url: |
unclassified:
location:
url: https://example.com/jenkins
adminAddress: example@mail.comCorrect:
controller:
jenkinsUrl: https://example.com/jenkins
jenkinsAdminEmail: example@mail.comFurther JCasC examples can be found here.
Jenkins Config as Code scripts can become quite large, and maintaining all of your scripts within one yaml file can be difficult. The Config as Code plugin itself suggests updating the CASC_JENKINS_CONFIG environment variable to be a comma separated list of paths for the plugin to traverse, picking up the yaml files as needed.
However, under the Jenkins helm chart, this CASC_JENKINS_CONFIG value is maintained through the templates. A better solution is to split your controller.JCasC.configScripts into separate values files, and provide each file during the helm install.
For example, you can have a values file (e.g values_main.yaml) that defines the values described in the VALUES_SUMMARY.md for your Jenkins configuration:
jenkins:
controller:
jenkinsUrlProtocol: https
installPlugins: false
...In a second file (e.g values_jenkins_casc.yaml), you can define a section of your config scripts:
jenkins:
controller:
JCasC:
configScripts:
jenkinsCasc: |
jenkins:
disableRememberMe: false
mode: NORMAL
...And keep extending your config scripts by creating more files (so not all config scripts are located in one yaml file for better maintenance):
values_jenkins_unclassified.yaml
jenkins:
controller:
JCasC:
configScripts:
unclassifiedCasc: |
unclassified:
...When installing, you provide all relevant yaml files (e.g helm install -f values_main.yaml -f values_jenkins_casc.yaml -f values_jenkins_unclassified.yaml ...). Instead of updating the CASC_JENKINS_CONFIG environment variable to include multiple paths, multiple CasC yaml files will be created in the same path var/jenkins_home/casc_configs.
Config as Code changes (to controller.JCasC.configScripts) can either force a new pod to be created and only be applied at next startup, or can be auto-reloaded on-the-fly.
If you set controller.sidecars.configAutoReload.enabled to true, a second, auxiliary container will be installed into the Jenkins controller pod, known as a "sidecar".
This watches for changes to configScripts, copies the content onto the Jenkins file-system and issues a POST to http://<jenkins_url>/reload-configuration-as-code with a pre-shared key.
You can monitor this sidecar's logs using command kubectl logs <controller_pod> -c config-reload -f.
If you want to enable auto-reload then you also need to configure rbac as the container which triggers the reload needs to watch the config maps:
controller:
sidecars:
configAutoReload:
enabled: true
rbac:
create: trueSome third-party systems (e.g. GitHub) use HTML-formatted data in their payload sent to a Jenkins webhook (e.g. URL of a pull-request being built).
To display such data as processed HTML instead of raw text set controller.enableRawHtmlMarkupFormatter to true.
This option requires installation of the OWASP Markup Formatter Plugin (antisamy-markup-formatter).
This plugin is not installed by default but may be added to controller.additionalPlugins.
When using agents with containers other than JNLP, The kubernetes plugin will communicate with those containers using the Kubernetes API. this changes the maximum concurrent connections
agent:
maxRequestsPerHostStr: "32"This will change the configuration of the kubernetes "cloud" (as called by jenkins) that is created automatically as part of this helm chart.
For tasks that use very large images, this timeout can be increased to avoid early termination of the task while the Kubernetes pod is still deploying.
agent:
retentionTimeout: "32"This will change the configuration of the kubernetes "cloud" (as called by jenkins) that is created automatically as part of this helm chart.
This will change how long Jenkins will wait (seconds) for pod to be in running state.
agent:
waitForPodSec: "32"This will change the configuration of the kubernetes "cloud" (as called by jenkins) that is created automatically as part of this helm chart.
Your Jenkins Agents will run as pods, and it's possible to inject volumes where needed:
agent:
volumes:
- type: Secret
secretName: jenkins-mysecrets
mountPath: /var/run/secrets/jenkins-mysecretsThe supported volume types are: ConfigMap, EmptyDir, HostPath, Nfs, PVC, Secret.
Each type supports a different set of configurable attributes, defined by the corresponding Java class.
To make use of the NetworkPolicy resources created by default, install a networking plugin that implements the Kubernetes NetworkPolicy spec.
Install helm chart with network policy enabled by setting networkPolicy.enabled to true.
You can use controller.networkPolicy.internalAgents and controller.networkPolicy.externalAgents stanzas for fine-grained controls over where internal/external agents can connect from.
Internal ones are allowed based on pod labels and (optionally) namespaces, and external ones are allowed based on IP ranges.
controller.scriptApproval allows to pass function signatures that will be allowed in pipelines.
Example:
controller:
scriptApproval:
- "method java.util.Base64$Decoder decode java.lang.String"
- "new java.lang.String byte[]"
- "staticMethod java.util.Base64 getDecoder"controller.serviceLabels can be used to add custom labels in jenkins-controller-svc.yaml.
For example:
ServiceLabels:
expose: trueThe Jenkins image stores persistence under /var/jenkins_home path of the container.
A dynamically managed Persistent Volume Claim is used to keep the data across deployments, by default.
This is known to work in GCE, AWS, and minikube. Alternatively, a previously configured Persistent Volume Claim can be used.
It is possible to mount several volumes using persistence.volumes and persistence.mounts parameters.
See additional persistence values using configuration commands.
- Create the PersistentVolume
- Create the PersistentVolumeClaim
- Install the chart, setting
persistence.existingClaimtoPVC_NAME
Certain volume type and filesystem format combinations may experience long
attach/mount times, 10 or more minutes, when using
fsGroup. This issue may result in the following entries in the pod's event
history:
Warning FailedMount 38m kubelet, aks-default-41587790-2 Unable to attach or mount volumes: unmounted volumes=[jenkins-home], unattached volumes=[plugins plugin-dir jenkins-token-rmq2g sc-config-volume tmp jenkins-home jenkins-config secrets-dir]: timed out waiting for the conditionIn these cases, experiment with replacing fsGroup with
supplementalGroups in the pod's securityContext. This can be achieved by
setting the controller.podSecurityContextOverride Helm chart value to
something like:
controller:
podSecurityContextOverride:
runAsNonRoot: true
runAsUser: 1000
supplementalGroups: [1000]This issue has been reported on azureDisk with ext4 and on Alibaba cloud.
It is possible to define which storage class to use, by setting persistence.storageClass to [customStorageClass].
If set to a dash (-), dynamic provisioning is disabled.
If the storage class is set to null or left undefined (""), the default provisioner is used (gp2 on AWS, standard on GKE, AWS & OpenStack).
Additional secrets and Additional Existing Secrets,
can be mounted into the Jenkins controller through the chart or created using controller.additionalSecrets or controller.additionalExistingSecrets.
A common use case might be identity provider credentials if using an external LDAP or OIDC-based identity provider.
The secret may then be referenced in JCasC configuration (see JCasC configuration).
values.yaml controller section, referencing mounted secrets:
controller:
# the 'name' and 'keyName' are concatenated with a '-' in between, so for example:
# an existing secret "secret-credentials" and a key inside it named "github-password" should be used in Jcasc as ${secret-credentials-github-password}
# 'name' and 'keyName' must be lowercase RFC 1123 label must consist of lower case alphanumeric characters or '-',
# and must start and end with an alphanumeric character (e.g. 'my-name', or '123-abc')
# existingSecret existing secret "secret-credentials" and a key inside it named "github-username" should be used in Jcasc as ${github-username}
# When using existingSecret no need to specify the keyName under additionalExistingSecrets.
existingSecret: secret-credentials
additionalExistingSecrets:
- name: secret-credentials
keyName: github-username
- name: secret-credentials
keyName: github-password
- name: secret-credentials
keyName: token
additionalSecrets:
- name: client_id
value: abc123
- name: client_secret
value: xyz999
JCasC:
securityRealm: |
oic:
clientId: ${client_id}
clientSecret: ${client_secret}
...
configScripts:
jenkins-casc-configs: |
credentials:
system:
domainCredentials:
- credentials:
- string:
description: "github access token"
id: "github_app_token"
scope: GLOBAL
secret: ${secret-credentials-token}
- usernamePassword:
description: "github access username password"
id: "github_username_pass"
password: ${secret-credentials-github-password}
scope: GLOBAL
username: ${secret-credentials-github-username}For more information, see JCasC documentation.
It's possible for this chart to generate SecretClaim resources in order to automatically create and maintain Kubernetes Secrets from HashiCorp Vault via kube-vault-controller
These Secrets can then be referenced in the same manner as Additional Secrets above.
This can be achieved by defining required Secret Claims within controller.secretClaims, as follows:
controller:
secretClaims:
- name: jenkins-secret
path: secret/path
- name: jenkins-short-ttl
path: secret/short-ttl-path
renew: 60RBAC is enabled by default. If you want to disable it you will need to set rbac.create to false.
It is possible to add custom pod templates for the default configured kubernetes cloud.
Add a key under agent.podTemplates for each pod template. Each key (prior to | character) is just a label, and can be any value.
Keys are only used to give the pod template a meaningful name. The only restriction is they may only contain RFC 1123 \ DNS label characters: lowercase letters, numbers, and hyphens. Each pod template can contain multiple containers.
There's no need to add the jnlp container since the kubernetes plugin will automatically inject it into the pod.
For this pod templates configuration to be loaded the following values must be set:
controller.JCasC.defaultConfig: trueThe example below creates a python pod template in the kubernetes cloud:
agent:
podTemplates:
python: |
- name: python
label: jenkins-python
serviceAccount: jenkins
containers:
- name: python
image: python:3
command: "/bin/sh -c"
args: "cat"
ttyEnabled: true
privileged: true
resourceRequestCpu: "400m"
resourceRequestMemory: "512Mi"
resourceLimitCpu: "1"
resourceLimitMemory: "1024Mi"Best reference is https://<jenkins_url>/configuration-as-code/reference#Cloud-kubernetes.
additionalAgents may be used to configure additional kubernetes pod templates.
Each additional agent corresponds to agent in terms of the configurable values and inherits all values from agent so you only need to specify values which differ.
For example:
agent:
podName: default
customJenkinsLabels: default
# set resources for additional agents to inherit
resources:
limits:
cpu: "1"
memory: "2048Mi"
additionalAgents:
maven:
podName: maven
customJenkinsLabels: maven
# An example of overriding the jnlp container
# sideContainerName: jnlp
image: jenkins/jnlp-agent-maven
tag: latest
python:
podName: python
customJenkinsLabels: python
sideContainerName: python
image: python
tag: "3"
command: "/bin/sh -c"
args: "cat"
TTYEnabled: trueThis chart provides ingress resources configurable via the controller.ingress block.
The simplest configuration looks like the following:
controller:
ingress:
enabled: true
paths: []
apiVersion: "extensions/v1beta1"
hostName: jenkins.example.comThis snippet configures an ingress rule for exposing jenkins at jenkins.example.com
You can define labels and annotations via controller.ingress.labels and controller.ingress.annotations respectively.
Additionally, you can configure the ingress tls via controller.ingress.tls.
By default, this ingress rule exposes all paths.
If needed this can be overwritten by specifying the wanted paths in controller.ingress.paths
If you want to configure a secondary ingress e.g. you don't want the jenkins instance exposed but still want to receive webhooks you can configure controller.secondaryingress.
The secondaryingress doesn't expose anything by default and has to be configured via controller.secondaryingress.paths:
controller:
ingress:
enabled: true
apiVersion: "extensions/v1beta1"
hostName: "jenkins.internal.example.com"
annotations:
kubernetes.io/ingress.class: "internal"
secondaryingress:
enabled: true
apiVersion: "extensions/v1beta1"
hostName: "jenkins-scm.example.com"
annotations:
kubernetes.io/ingress.class: "public"
paths:
- /github-webhookIf you want to expose Prometheus metrics you need to install the Jenkins Prometheus Metrics Plugin.
It will expose an endpoint (default /prometheus) with metrics where a Prometheus Server can scrape.
If you have implemented Prometheus Operator, you can set controller.prometheus.enabled to true to configure a ServiceMonitor and PrometheusRule.
If you want to further adjust alerting rules you can do so by configuring controller.prometheus.alertingrules
If you have implemented Prometheus without using the operator, you can leave controller.prometheus.enabled set to false.
The controller pod uses an Init Container to install plugins etc. If you are behind a corporate proxy it may be useful to set controller.initContainerEnv to add environment variables such as http_proxy, so that these can be downloaded.
Additionally, you may want to add env vars for the init container, the Jenkins container, and the JVM (controller.javaOpts):
controller:
initContainerEnv:
- name: http_proxy
value: "http://192.168.64.1:3128"
- name: https_proxy
value: "http://192.168.64.1:3128"
- name: no_proxy
value: ""
- name: JAVA_OPTS
value: "-Dhttps.proxyHost=proxy_host_name_without_protocol -Dhttps.proxyPort=3128"
containerEnv:
- name: http_proxy
value: "http://192.168.64.1:3128"
- name: https_proxy
value: "http://192.168.64.1:3128"
javaOpts: >-
-Dhttp.proxyHost=192.168.64.1
-Dhttp.proxyPort=3128
-Dhttps.proxyHost=192.168.64.1
-Dhttps.proxyPort=3128This configuration enables jenkins to use keystore in order to serve HTTPS.
Here is the value file section related to keystore configuration.
Keystore itself should be placed in front of jenkinsKeyStoreBase64Encoded key and in base64 encoded format. To achieve that after having keystore.jks file simply do this: cat keystore.jks | base64 and paste the output in front of jenkinsKeyStoreBase64Encoded.
After enabling httpsKeyStore.enable make sure that httpPort and targetPort are not the same, as targetPort will serve HTTPS.
Do not set controller.httpsKeyStore.httpPort to -1 because it will cause readiness and liveliness prob to fail.
If you already have a kubernetes secret that has keystore and its password you can specify its' name in front of jenkinsHttpsJksSecretName, You need to remember that your secret should have proper data key names jenkins-jks-file (or override the key name using jenkinsHttpsJksSecretKey)
and https-jks-password (or override the key name using jenkinsHttpsJksPasswordSecretKey; additionally you can make it get the password from a different secret using jenkinsHttpsJksPasswordSecretName). Example:
controller:
httpsKeyStore:
enable: true
jenkinsHttpsJksSecretName: ''
httpPort: 8081
path: "/var/jenkins_keystore"
fileName: "keystore.jks"
password: "changeit"
jenkinsKeyStoreBase64Encoded: ''To create SecurityGroupPolicies set awsSecurityGroupPolicies.enabled to true and add your policies. Each policy requires a name, array of securityGroupIds and a podSelector. Example:
awsSecurityGroupPolicies:
enabled: true
policies:
- name: "jenkins-controller"
securityGroupIds:
- sg-123456789
podSelector:
matchExpressions:
- key: app.kubernetes.io/component
operator: In
values:
- jenkins-controllerSet directConnection to true to allow agents to connect directly to a given TCP port without having to negotiate a HTTP(S) connection. This can allow you to have agent connections without an external HTTP(S) port. Example:
agent:
jenkinsTunnel: "jenkinsci-agent:50000"
directConnection: trueUpgrade an existing release from stable/jenkins to jenkins/jenkins seamlessly by ensuring you have the latest repository info and running the upgrade commands specifying the jenkins/jenkins chart.
Chart release versions follow SemVer, where a MAJOR version change (example 1.0.0 -> 2.0.0) indicates an incompatible breaking change needing manual actions.
See UPGRADING.md for a list of breaking changes