Skip to content

Latest commit

 

History

History
62 lines (44 loc) · 2.12 KB

README.md

File metadata and controls

62 lines (44 loc) · 2.12 KB
Raw

CC2510Lib

this is a fork of the CC2510Lib (https://github.com/fishpepper/CC2510Lib) that is a fork of the CCLib (https://github.com/wavesoft/CCLib)

STATUS: Flash read/write confirmed working on raspberry pi V2.

working:

  • connecting
  • cc_info.py
  • erase chip
  • write & verify flash using cc_write_flash.py (tested with hex from sdcc)

fishpepper ported it to support programming of a cc2510f16 chip. adding cc251x support is trivial, see ccdebugger.py and chip id code. I then ported it from Arduino to raspbian/raspberry, as i did not manage to get the arduino code or the voltage dividers work correctly. Using the raspberry the voltage levels are just right, and nothing other then the wires are needed. Also this managed to increase flash speed a lot :)

Just also wanna thank fishpepper for his work, i'm surely admire your work!

Wiring

3.3V VCC     = Pin 1
DBG DATA     = Pin 11
DBG CLOCK    = Pin 7
GND          = Pin 6
RESET        = Pin 13

Usage

  1. Install WiringPi-Python described at https://github.com/WiringPi/WiringPi-Python
  2. Connect all 5 wires as described above.
  3. Use the python scripts from the Python/ directory to read/flash your chip.

Disclaimer

i sucessfully flashed a cc2510f16 chip with the scripts provided with this project, however I DO NOT GURANTEE THAT THIS WILL WORK IN YOUR CASE. YOU ARE USING THIS CODE SOLELY AT YOUR OWN RISK!

License

Copyright (c) 2016 Jimmy Wennlund - github.com/jimmyw Copyright (c) 2015 Simon Schulz - github.com/fishpepper

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/.