livemonitormain

[avanmourik]

I have read somewhere that ebusd offers the option to find out the exact status of a heat pump (in my case Vaillant VWL 75/6).
it should cover status like :start deicing, compressor off , etc and is called LiveMonitorMain.
However the exact description of which entries need to be done to any of the csv files (08hmu, 76vwzio , 15ctlv2) is unclear.

Has anyone figured out how to get this status ?

From the internet I got the below:
Although it is accepted when put in 76.vwzio.csv it does not seem to give a correct output

Additional values from VWZ menu (Live Monitor Main),,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

*r,,,,,,B503,00,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
*w,,,,,,B503,00,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
w,,ReadLiveMonitorMain,Payload needed sent: 03FFFF,,,,,,m,HEX:1,,,,,,,,,,,,,,,,,,,,,,,,,,
r1,,LiveMonitorMain,,71,,,,id,,UCH,0x39=Controller starting;0xf4=Standby;0xf5=Supply on;0xf6=Heating: Flow ok;0xf7=Heating: temperature self test;0xf8=Heating: Start;0xfa=Heating: Fan on;0xfc=EEV switch;0xfd=Compressor starting;0xfe=Heating: compressor on;0x00=Compressor off;0x02=Compressor coast down;0x03=Deicing start;0x04=Deicing;0x05=Deicing end;0x12=Cooling: Flow on;0x14=Cooling: temperature self test;0x15=Cooling: starting;0x17=Cooling: Fan on;0x13=Cooling: Flow ok;0x19=Cooling: EEV?;0x1a=Cooling: compressor starting;0x1b=Cooling: compressor on;0x1d=Cooling: ending;0x29=Start condition not met;0x57=Device error;0x44=Flow error in distribution system,,,function,,UCH,0x01=Heating;0x02=Cooling,,,,,,,,,,,,,,,,,,,