Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

BAI etc. not recognized with Version 3 #87

Closed
texel007 opened this issue May 21, 2017 · 6 comments
Closed

BAI etc. not recognized with Version 3 #87

texel007 opened this issue May 21, 2017 · 6 comments
Labels
duplicate

Comments

@texel007
Copy link

Hi,
I just upgraded from an old ebusd version (2.1.0) to v3.

However, it seems as most of the devices are not recognized.

I start ebusd with:
ebusd -s

In ebusctl I receive with "i" the following:

localhost: i
version: ebusd 3.0pre.dbe70f0
update check: OK, 4 newer configuration files available
signal: acquired
symbol rate: 23
max symbol rate: 98
reconnects: 0
masters: 4
messages: 122
conditional: 4
poll: 0
update: 8
address 03: master #11
address 08: slave #11, scanned "MF=Vaillant;ID=BAI00;SW=0518;HW=7401"
address 10: master #2
address 31: master #8, ebusd
address 36: slave #8, ebusd
address 50: slave, scanned "MF=Vaillant;ID=V6100;SW=0418;HW=1902", loaded "vaillant/50.v61.mc.csv"
address 70: master #4
address 75: slave #4, scanned "MF=Vaillant;ID=V8100;SW=0202;HW=2502"

However with find -v
only the commands of the V61 are shown (mc...)
Entire commands of BAI, VRC470 etc. are missing.

Any idea what went wrong?

Kind regards,

Texel

find -v result:

localhost: find -v
broadcast datetime = no data stored
broadcast error = no data stored
broadcast hwcStatus = no data stored
broadcast ident = no data stored
broadcast ident = no data stored
broadcast load = no data stored
broadcast outsidetemp = temp2=17.812
broadcast signoflife = no data stored
broadcast vdatetime = time=13:48:57;date=21.05.2017
mc ActualTempDesired = no data stored
mc AutoOffMode = no data stored
mc BoilerCircuitPump = no data stored
mc BoilerMaxPreShutdown = no data stored
mc CirPump = no data stored
mc currenterror = error=-;error=-;error=-;error=-;error=-
mc Date = no data stored
mc DayNightState = no data stored
mc DisplayedRoomTempDesired = no data stored
mc errorhistory = no data stored
mc FloorPavingDryingDay = no data stored
mc FloorPavingDryingTemp = no data stored
mc Flow1Sensor = no data stored
mc FlowTempDesired = no data stored
mc FlowTempMax = no data stored
mc FlowTempMin = no data stored
mc FrostProtConfig = no data stored
mc FrostProtectDelay = no data stored
mc FrostProtState = no data stored
mc Hc1PumpKol1PP1Port = no data stored
mc Hc2aLegPumpP2Port = no data stored
mc Hc2CircuitType = no data stored
mc Hc2ContinuosHeating = no data stored
mc Hc2ManualOPRoomTempDesired = no data stored
mc Hc2pDemand = no data stored
mc Hc2PumpAlPort = no data stored
mc Hc2QuickVetoActive = no data stored
mc Hc2QuickVetoTemp = no data stored
mc Hc2RoomControlMode = no data stored
mc Hc2SummerOffset = no data stored
mc Hc2zPort = no data stored
mc HcFlowIncrease = no data stored
mc HcParallelStorageFillingEnabled = no data stored
mc HcPreHeatingActive = no data stored
mc HcPreShutdownActive = no data stored
mc HcPumpIdlePeriod = no data stored
mc HcPumpIdlePeriodActive = no data stored
mc hcTimer.Friday = no data stored
mc hcTimer.Monday = no data stored
mc hcTimer.Saturday = no data stored
mc hcTimer.Sunday = no data stored
mc hcTimer.Thursday = no data stored
mc hcTimer.Tuesday = no data stored
mc hcTimer.Wednesday = no data stored
mc HeatingCurve = no data stored
mc HolidayTempDesired = no data stored
mc InternalOperatingMode470 = no data stored
mc IsInBankHoliday = no data stored
mc IsInHoliday = no data stored
mc IsInImpactVentilation = no data stored
mc IsInOneDayBankHoliday = no data stored
mc IsInOneDayHoliday = no data stored
mc IsInParty = no data stored
mc IsInSystemOff = no data stored
mc Mixer1DutyCycle = no data stored
mc Mixer1State = no data stored
mc MonitorEEpromInkonsiNumber = no data stored
mc OffConfig = no data stored
mc PreheatingMinutesMax = no data stored
mc PsTempDesired = no data stored
mc PumpSavingState = no data stored
mc Setpoints.Friday = no data stored
mc Setpoints.Monday = temp1=0.5;temp1=20.5;temp1=20.5
mc Setpoints.Saturday = no data stored
mc Setpoints.Sunday = no data stored
mc Setpoints.Thursday = no data stored
mc Setpoints.Tuesday = no data stored
mc Setpoints.Wednesday = no data stored
mc SfState = no data stored
mc SunMoonInfo = no data stored
mc TempDesiredLow = no data stored
mc ThermostatState = no data stored
mc Time = no data stored
mc Weekday = no data stored
memory eeprom = no data stored
memory ram = no data stored
scan id = no data stored
scan.08 = MF=Vaillant;ID=BAI00;SW=0518;HW=7401
scan.15 = no data stored
scan.50 = MF=Vaillant;ID=V6100;SW=0418;HW=1902
scan.75 = MF=Vaillant;ID=V8100;SW=0202;HW=2502
@texel007
Copy link
Author

The following log is also strange - what means [main error] scan config 08: ERR: element not found ?

2017-05-21 14:26:59.838 [update notice] unknown MS cmd: 7050b505053c3e013e01 / 00
2017-05-21 14:26:59.950 [update notice] unknown MS cmd: 1050b51303041f00 / 0a1f000200000002000200
2017-05-21 14:27:00.957 [update notice] unknown MS cmd: 1008b5110101 / 09666200123624000032
2017-05-21 14:27:01.227 [update notice] unknown MS cmd: 1050b504021901 / 0401292929
2017-05-21 14:27:01.883 [main notice] starting initial broadcast scan
2017-05-21 14:27:01.909 [bus error] send to fe: ERR: read timeout, retry
2017-05-21 14:27:01.957 [bus error] send to fe: ERR: read timeout, retry
2017-05-21 14:27:02.005 [bus error] send to fe: ERR: read timeout, retry
2017-05-21 14:27:02.053 [bus error] send to fe: ERR: read timeout
2017-05-21 14:27:02.055 [main error] initial scan failed: ERR: read timeout
2017-05-21 14:27:02.717 [update notice] unknown MS cmd: 7050b5040126 / 0705000009003e01
2017-05-21 14:27:02.969 [update notice] unknown MS cmd: 1008b5040100 / 0a03042714210507170012
2017-05-21 14:27:03.240 [update notice] unknown MS cmd: 1008b5110102 / 05033c96466e
2017-05-21 14:27:05.032 [update notice] unknown MS cmd: 1050b5040137 / 0200ff
2017-05-21 14:27:05.320 [update notice] unknown MS cmd: 1008b510090000006effff010000 / 0101
2017-05-21 14:27:07.015 [update notice] unknown MS cmd: 1050b505021800 / 00
2017-05-21 14:27:07.575 [update notice] unknown MS cmd: 7008b5110101 / 09666200123624000032
2017-05-21 14:27:08.911 [main error] scan config 08: ERR: element not found
2017-05-21 14:27:09.093 [update notice] unknown MS cmd: 1050b505023001 / 0101
2017-05-21 14:27:11.021 [main error] scan config 15: ERR: element not found
2017-05-21 14:27:11.237 [update notice] unknown MS cmd: 1008b5110101 / 09666200123624000032
2017-05-21 14:27:12.419 [update notice] unknown MS cmd: 7050b5040126 / 0705000009003e01
2017-05-21 14:27:13.104 [update notice] unknown MS cmd: 1050b5040126 / 0705000009003e01
2017-05-21 14:27:13.965 [main error] scan config 50: ERR: element not found
2017-05-21 14:27:14.243 [update notice] unknown MS cmd: 1008b5110100 / 08310312001f100000
2017-05-21 14:27:14.467 [update notice] unknown BC cmd: 10feb51603010012
2017-05-21 14:27:15.075 [update notice] unknown MS cmd: 1050b5040137 / 0200ff
2017-05-21 14:27:15.376 [update notice] unknown MS cmd: 1008b510090000006effff010000 / 0101
2017-05-21 14:27:15.787 [main error] scan config 75: ERR: element not found
2017-05-21 14:27:17.198 [update notice] unknown MS cmd: 1050b505021800 / 00
2017-05-21 14:27:17.296 [update notice] unknown MS cmd: 7008b5110101 / 09666200123624000032
2017-05-21 14:27:19.182 [update notice] unknown MS cmd: 1050b505023001 / 0101
2017-05-21 14:27:21.242 [update notice] unknown MS cmd: 1008b5110101 / 09666200123624000032
2017-05-21 14:27:22.093 [update notice] unknown MS cmd: 7050b5040126 / 0705000009003e01
2017-05-21 14:27:23.353 [update notice] unknown MS cmd: 1050b503020001 / 0affffffffffffffffffff
2017-05-21 14:27:23.608 [update notice] unknown MS cmd: 1050b509040e010000 / 00
2017-05-21 14:27:23.864 [update notice] unknown MS cmd: 1050b509040e200000 / 00
2017-05-21 14:27:24.123 [update notice] unknown MS cmd: 1008b5110102 / 05033c96466e
2017-05-21 14:27:25.286 [update notice] unknown MS cmd: 1050b5040137 / 0200ff

@texel007
Copy link
Author

Sorry to post again, but maybe the start of the log also helps (it seems the initial scan fails ..)

root@ebusd:/etc/ebusd/vaillant# ebusd -s -f --configpath=/etc/ebusd
2017-05-21 14:36:21.243 [main notice] ebusd 3.0pre.dbe70f0 started
2017-05-21 14:36:21.280 [bus notice] bus started with own address 31/36
2017-05-21 14:36:21.535 [bus notice] signal acquired
2017-05-21 14:36:21.625 [bus notice] new master 10, master count 2
2017-05-21 14:36:21.691 [update notice] unknown MS cmd: 1050b503020001 / 0affffffffffffffffffff
2017-05-21 14:36:21.944 [update notice] unknown MS cmd: 1050b509040e010000 / 00
2017-05-21 14:36:22.187 [update notice] unknown MS cmd: 1050b509040e200000 / 00
2017-05-21 14:36:22.456 [bus notice] new master 03, master count 3
2017-05-21 14:36:22.457 [update notice] unknown MS cmd: 1008b5110102 / 05033c96466e
2017-05-21 14:36:23.656 [update notice] unknown MS cmd: 1050b5040137 / 0200ff
2017-05-21 14:36:24.456 [bus notice] new master 70, master count 4
2017-05-21 14:36:24.505 [update notice] unknown MS cmd: 7050b5040126 / 0705000009003e01
2017-05-21 14:36:25.798 [update notice] unknown MS cmd: 1008b510090000006effff010000 / 0101
2017-05-21 14:36:26.038 [update notice] unknown MS cmd: 1050b505021800 / 00
2017-05-21 14:36:27.733 [update notice] unknown MS cmd: 1050b505023001 / 0101
2017-05-21 14:36:29.202 [update notice] unknown MS cmd: 1050b51303041f00 / 0a1f000200000002000200
2017-05-21 14:36:29.348 [update notice] unknown MS cmd: 7008b5110101 / 09625e30123624000032
2017-05-21 14:36:29.523 [update notice] unknown MS cmd: 1050b504021901 / 0401292929
2017-05-21 14:36:29.811 [update notice] unknown MS cmd: 1008b5110101 / 09625e30123624000032
2017-05-21 14:36:31.280 [main notice] starting initial broadcast scan
2017-05-21 14:36:31.337 [bus error] send to fe: ERR: read timeout, retry
2017-05-21 14:36:31.385 [bus error] send to fe: ERR: read timeout, retry
2017-05-21 14:36:31.433 [bus error] send to fe: ERR: read timeout, retry
2017-05-21 14:36:31.481 [bus error] send to fe: ERR: read timeout
2017-05-21 14:36:31.483 [main error] initial scan failed: ERR: read timeout
2017-05-21 14:36:31.886 [update notice] unknown MS cmd: 1050b503020003 / 0affffffffffffffffffff
2017-05-21 14:36:32.145 [update notice] unknown MS cmd: 1050b5040126 / 0705000009003e01
2017-05-21 14:36:32.445 [update notice] unknown MS cmd: 1008b5040100 / 0a03343614210507173012
2017-05-21 14:36:33.854 [update notice] unknown MS cmd: 1050b5040137 / 0200ff
2017-05-21 14:36:34.220 [update notice] unknown MS cmd: 7050b5040126 / 0705000009003e01
2017-05-21 14:36:35.866 [update notice] unknown MS cmd: 1008b510090000006effff010000 / 0101
2017-05-21 14:36:36.107 [update notice] unknown MS cmd: 1050b505021800 / 00
2017-05-21 14:36:37.945 [update notice] unknown MS cmd: 1050b505023001 / 0101
2017-05-21 14:36:39.048 [update notice] unknown MS cmd: 7008b5110101 / 09625e30123624000032
2017-05-21 14:36:39.976 [update notice] unknown MS cmd: 1008b5110101 / 09625e30123624000032
2017-05-21 14:36:40.999 [update notice] unknown MS cmd: 7050b505053c3e013e01 / 00
2017-05-21 14:36:41.519 [main error] scan config 08: ERR: element not found
2017-05-21 14:36:41.942 [update notice] unknown MS cmd: 1008b5100305ff01 / 00
2017-05-21 14:36:43.565 [main error] scan config 15: ERR: element not found
2017-05-21 14:36:43.894 [update notice] unknown MS cmd: 7050b5040126 / 0705000009003e01

@texel007
Copy link
Author

seems I can't write anymore on the ebus. There is always a read timeout.
When I downgraded to my old ebusd2.1 version it is a similar behavior. Maybe something with the Raspi1 went wrong (I updated Linux before changing to Ebusd v3). Maybe with the update the USB timing has changed? I saw in the FHEM forum a user reporting similar issues

... any advice?

@john30
Copy link
Owner

john30 commented May 25, 2017

yes I guess the root cause is the linux update. can you go back to the previous version?

@texel007
Copy link
Author

unfortunately not - I don't have a backup of the old version and even don't know exactly the old version.

New version is:
Linux ebusd 4.9.24+ #993 Wed Apr 26 17:56:54 BST 2017 armv6l GNU/Linux

Do you have any hint where I search/debug? Unfortunately I don't have access to the hardware at the moment (it´s at a different location) so I can't plug it to another Raspi.

Do you have any experience with HW changes? Raspi1,2,3 , Odroid .. I thought it should not really matter which HW or Linux Version I use?

@john30
Copy link
Owner

john30 commented May 28, 2017

this is a duplicate of #79, please continue discussion there

@john30 john30 closed this as completed May 28, 2017
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
duplicate
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@john30 @texel007