wlan.ini edit from webui

[shanislav]

Hello
Is possible edit wlan.ini from web interface?
I try to upload wlan.ini but it says that the file already exists.

Thanks

[friedpa]

@shanislav It is not possible, you have to take out the SD-Card and update the file on your PC/Laptop.

[shanislav]

so i did it because time synchronization doesn't work for me, so i tried to set dns. But the problem still persists. Do you have an idea where the mistake is? or should I start a new question?
I tried more ntp servers.

1970-01-01T01:03:24: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
1970-01-01T01:03:24: =============================================================================================
1970-01-01T01:03:24: =================================== Main Started ============================================
1970-01-01T01:03:24: =============================================================================================
1970-01-01T01:03:28: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
1970-01-01T01:03:28: task_autodoFlow - next round - Round #1
1970-01-01T01:03:28: FlowControll.doFlow - ClassFlowMakeImage
1970-01-01T01:03:36: FlowControll.doFlow - ClassFlowAlignment
1970-01-01T01:04:05: FlowControll.doFlow - ClassFlowCNNGeneral
1970-01-01T01:04:11: FlowControll.doFlow - ClassFlowPostProcessing
1970-01-01T01:04:11: PostProcessing - Raw: 0786 Value: 786 Error: no error
1970-01-01T01:04:11: FlowControll.doFlow - ClassFlowMQTT
1970-01-01T01:04:12: sent publish successful in MQTTPublish, msg_id=9004, test/dopici/connection, connected
1970-01-01T01:04:12: sent publish successful in MQTTPublish, msg_id=62920, test/dopici/uptime, 48
1970-01-01T01:04:12: sent publish successful in MQTTPublish, msg_id=30679, test/dopici/freeMem, 3170999
1970-01-01T01:04:12: sent publish successful in MQTTPublish, msg_id=32584, test/dopici/wifiRSSI, -51
1970-01-01T01:04:12: sent publish successful in MQTTPublish, msg_id=56302, test/dopici/plyn/value, 786
1970-01-01T01:04:12: sent publish successful in MQTTPublish, msg_id=5473, test/dopici/plyn/error, no error
1970-01-01T01:04:12: sent publish successful in MQTTPublish, msg_id=59057, test/dopici/plyn/rate, 0.000000
1970-01-01T01:04:12: sent publish successful in MQTTPublish, msg_id=34762, test/dopici/plyn/raw, 0786
1970-01-01T01:04:12: sent publish successful in MQTTPublish, msg_id=13156, test/dopici/plyn/timestamp, 1970-01-01T01:03:36
1970-01-01T01:04:12: sent publish successful in MQTTPublish, msg_id=10028, test/dopici/plyn/json, {"value":786,"raw":"0786","error":"no error","rate":0.000000,"timestamp":"1970-01-01T01:03:36"}
1970-01-01T01:04:12: task_autodoFlow - round done

[friedpa]

You have to put in the IP Address of the Time-Server e.g. 137.250.121.254

[shanislav]

I tried it too but it didn't help.

[System]
TimeZone = CET-1CEST,M3.5.0,M10.5.0/3
TimeServer = 137.250.121.254
;AutoAdjustSummertime = false
;Hostname = undefined
SetupMode = false

EDIT:

interesting when i set it to dhcp so it works.
I'm sure my static address settings are fine. I'll leave it to dhcp .. thank you for your time

[friedpa]

Maybe the Server is down, try some other NTP server. I have a Fritz! Router, the Router also provides NTP, so maybe your Router is also capable to provide the time?

[De-k]

See
#730