NEWS.md

1.3.1: September 24, 2016

• added include required("foo") syntax to specify includes that fail if not present
• support for more kinds of property in ConfigBeanFactory:
  • enumerations
  • optional fields
  • lists of beans
• numbers can now start with a decimal (".33" vs. "0.33"), these are still parsed as strings but Config.getDouble() etc. will convert them to numbers
• a few other small bugfixes

1.3.0: May 8, 2015

• no changes from 1.3.0-M3
• this is an ABI-guaranteed stable release.
• 1.3.0 should be ABI-compatible with 1.2.x for most applications, though there are enough changes to corner cases and implementation that some obscure things could break. Please see the notes for the 1.3.0 milestones below for details, especially for 1.3.0-M1.

1.3.0-M3: April 21, 2015

• this is an ABI-not-guaranteed beta release in advance of 1.3.0. Please see the notes for 1.3.0-M1 below for warnings, caveats, and the bulk of what's changed since 1.2.1.

API changes (since 1.3.0-M2):

• renamed some methods in the new ConfigDocument for consistency with Config (breaks ABI vs. 1.3.0-M2, but not vs. any stable release)

Fixes:

• couple of bugfixes in ConfigDocument

Thank you to contributors with commits since v1.3.0-M2 tag:

• Preben Ingvaldsen

1.3.0-M2: April 1, 2015

• not in fact an April Fool's joke. Unless it's broken. Then it was.
• this is an ABI-not-guaranteed beta release in advance of 1.3.0. Please see the notes for 1.3.0-M1 below for warnings, caveats, and the bulk of what's changed since 1.2.1.
• this release churns the internals a good bit since 1.3.0-M1, so would benefit from your testing efforts.

New API (since 1.3.0-M1):

• added Config.hasPathOrNull
• added Config.getIsNull
• added parser.ConfigDocument which supports simple load/edit/save on a config file. For now, the only allowed edits are removing/replacing values. This was a major effort (redoing the whole parser), implemented by Preben Ingvaldsen.

Fixes:

• added missing @since tags to javadoc
• fixed obscure bug in converting to camel case when instantiating beans

Thank you to contributors with commits since v1.3.0-M1 tag:

• Glen Ford
• Jay McCure
• Preben Ingvaldsen

1.3.0-M1: March 6, 2015

• this is an ABI-not-guaranteed beta release in advance of 1.3.0. The public, documented ABI should not be broken vs. 1.2.0; however, there are enough changes that something certainly could break, and some obscure corner cases have changed semantics and that could bite some people.

Changes that are most likely to break something:

• now built with Java 8 and requires Java 8
• if you were relying on the order of key iteration in a config, note that Java 8 changed the iteration order for hashes and that includes Config and ConfigObject
• several correctness fixes to resolving substitutions (the ${foo} syntax). These should only matter in weird corner cases, but some people did encounter the problems such as in #177.
• throw an exception if a size-in-bytes values are out of Long range #170
• two adjacent undefined concatenation elements (like ${?foo}${?bar}) now become undefined instead of throwing an exception
• when rendering a path that starts with a digit, don't put quotes around it
• set the Accept header on http requests when loading config from a URL
• when getting a 404 from a URL, treat it as a missing file (silently ignore) instead of throwing exception. Other error codes will still throw an exception.
• ConfigParseOptions.prependIncluder/appendIncluder always throw when given a null includer, formerly they only threw sometimes

New API:

• ConfigBeanFactory will auto-fill a JavaBean from a Config
• it is now possible to create a ConfigOrigin using ConfigOriginFactory and to modify origins on values using ConfigValue.withOrigin
• Config.getMemorySize returns a ConfigMemorySize
• Config.getDuration returns a java.time.Duration
• the existing ConfigValueFactory.fromAnyRef and related methods now pass through a ConfigValue instead of throwing an exception
• ConfigFactory.defaultApplication() returns the default Config used by ConfigFactory.load() in between defaultReference() and defaultOverrides(), leaving ConfigFactory.load() as a trivial convenience API that uses no internal magic.

Improvements:

• allow duration abbreviations "nanos", "millis", "micros"
• Config.hasPath is now much faster, so if you were caching to avoid this you may be able to stop
• new debug option -Dconfig.trace=substitutions explains how ${foo} references are being resolved
• sort numeric keys in numeric order when rendering
• allow whitespace in between two substitutions referring to objects or lists when concatenating them, so ${foo} ${bar} and ${foo}${bar} are now the same if foo and bar are objects or lists.
• better error messages for problems loading resources from classpath, now we show the jar URL that failed
• even more test coverage!
• lots of minor javadoc fixes
• method names in javadoc now link to github source

Bug fixes:

• fix "allow unresolved" behavior for unresolved list elements
• class loaders are cached with a WeakReference to avoid leaks #171
• create valid output for values with multiline descriptions #239
• -Dsun.io.serialization.extendedDebugInfo=true no longer explodes due to calling toString on an internal object, #176

Thank you to contributors with commits since v1.2.1 tag:

• Alex Wei
• Andrey Zaytsev
• Ben Jackman
• Ben McCann
• Chris Martin
• Dale Wijnand
• Francois Dang Ngoc
• ian
• KAWACHI Takashi
• Kornel Kielczewski
• Lunfu Zhong
• Michel Daviot
• Paul Phillips
• Pavel Yakunin
• Preben Ingvaldsen
• verbeto
• Wu Zhenwei

1.2.1: May 2, 2014

• bugfix release, no API additions or changes
• fix resolving substitutions in include statements nested inside objects
• when rendering an object to a string, sort the fields
• handle unresolved substitutions in value concatenations
• make ConfigOrigin.comments unmodifiable
• when using '+=' or 'include' inside a list, throw an exception instead of generating a wrong result
• when context class loader is unset throw a more helpful exception than NullPointerException
• ignore non-string values in a Properties object

1.2.0: January 15, 2014

• new stable ABI release (binary compatible with 1.0.x; a few new APIs)
• new API ConfigResolveOptions.setAllowUnresolved lets you partially-resolve a Config
• new API Config.isResolved lets you check on resolution status
• new API Config.resolveWith lets you source substitutions from somewhere other than the Config itself
• new API Config.getDuration() replaces getMilliseconds and getNanoseconds
• if -Dconfig.file, -Dconfig.resource, -Dconfig.url refer to a nonexistent file, resource, or url it is now an error rather than silently loading an empty configuration.
• quite a few bugfixes

1.1.0-4dd6c85cab1ef1a4415abb74704d60e57497b7b8: January 8, 2014

• remove junk in POM caused by broken local configuration
• build jar using Java 1.6 (and enforce this in build)
• change getDuration to return unboxed long instead of boxed
• API documentation improvements http://typesafehub.github.io/config/latest/api/

1.1.0-9f31d6308e7ebbc3d7904b64ebb9f61f7e22a968: January 6, 2014

• this is a snapshot/preview with API/ABI additions. New API since 1.0.x is NOT guaranteed to remain compatible for now since the purpose of this release is to test it. This release is supposed to be ABI-compatible with 1.0.x however.
• snapshots now use the git hash they are based on in the version, instead of SNAPSHOT, so they are a stable reference if you want to test them out.
• if -Dconfig.file, -Dconfig.resource, -Dconfig.url refer to a nonexistent file, resource, or url it is now an error rather than silently loading an empty configuration.
• new API Config.getDuration() replaces getMilliseconds and getNanoseconds. (should it return long instead of Long even though it's been in git for a while? weigh in at lightbend#119 )
• new API ConfigResolveOptions.setAllowUnresolved lets you partially-resolve a Config
• new API Config.isResolved lets you check on resolution status
• new API Config.resolveWith lets you source substitutions from somewhere other than the Config itself
• compiled with debug symbols
• add -Dconfig.trace=loads feature to trace loaded files and failures
• improvements to ConfigObject render() formatting so you can print out a config in a prettier way
• attempt to honor Content-Type when loading from a URL
• a fair list of corner case bugfixes

1.0.2: July 3, 2013

• ignore byte-order mark (BOM), treating it as whitespace
• very minor docs/build improvements

1.0.1: May 19, 2013

• when an array is requested and an object found, try to convert the object to an array if the object has numeric keys in it. This is intended to support -Dfoo.0=bar, -Dfoo.1=baz which would create foo : { "0" : "bar", "1" : "baz" }; which in turn could now be treated as if it were foo : ["bar","baz"]. This is useful for creating array values on the command line using Java system properties.
• fix a ConcurrentModificationException if an app modified system properties while we were trying to parse them.
• fix line numbering in error messages for newlines within triple quotes.

1.0.0: October 15, 2012

• no changes from 0.6.0. ABI now guaranteed for 1.0.x series.

0.6.0: October 10, 2012

• add ConfigRenderOptions.setJson which can be used to enable or disable the use of HOCON extensions (other than comments, which remain separately-controlled). Right now setJson(false) will result in a somewhat prettier rendering using extensions.
• add ConfigFactory.invalidateCaches() to support reloading system properties (mostly this is intended for use in unit tests).
• make ConfigException serializable, in case you have some logging system or similar that relies on that. Serialization of ConfigException is not guaranteed to be compatible across releases.

0.5.2: September 6, 2012

• add versions of ConfigFactory.load() which let you specify ConfigParseOptions and ConfigResolveOptions.

0.5.0: July 5, 2012

• triple-quoted strings as in Python or Scala
• obscure backward incompatibilities:
  • """" previously parsed as two empty strings concatenated into a single empty string, now it parses as an unterminated triple-quoted string.
  • a triple-quoted string like """\n""" previously parsed as an empty string, a string with one newline character, and another empty string, all concatenated into a single string. Now it parses as a string with two characters (backslash and lowercase "n").
  • in short you could have two adjacent quoted strings before, where one was an empty string, and now you can't. As far as I know, the empty string was always worthless in this case and can just be removed.
• added methods atPath() and atKey() to ConfigValue, to wrap the value into a Config
• added method withValue() to Config and ConfigObject, to add a value at a given path or key

0.4.1: May 22, 2012

• publish as OSGi bundle

0.4.0: April 12, 2012

• this is rolling toward 1.0 and should be pretty much feature-complete.
• this version is published on Maven central so you need to update your dependency coordinates
• the serialization format has changed to one that's extensible and lets the library evolve without breaking serialization all the time. The new format is also much more compact. However, this change is incompatible with old serializations, if you rely on that. The hope is to avoid serialization breakage in the future now that the format is not the default Java one (which was a direct dump of all the implementation details).
• serializing an unresolved Config (one that hasn't had resolve() called on it) is no longer supported, you will get NotSerializableException if you try.
• ConfigValue.render() now supports ConfigRenderOptions which means you can get a no-whitespace no-comments plain JSON rendering of a ConfigValue
• supports self-referential substitutions, such as path=${path}":/bin", by "looking backward" to the previous value of path
• supports concatenating arrays and merging objects within a single value. So you can do path=${path} [ "/bin" ] for example. See README and spec for more details.
• supports array append += where path+="/bin" expands to path=${?path} [ "/bin" ]
• supports specifying type of include include url("http://example.com/"), include file("/my/file.conf"), and include classpath("whatever"). This syntax forces treatment as URL, file, or classpath resource.
• supports including URLs include "http://example.com/whatever.conf" (if an include is a valid URL, it's loaded as such). This is incompatible with prior versions, if you have a filename that is also a valid URL, it would have loaded previously but now it will not. Use the include file("") syntax to force treatment as a file.
• class loaders are now recursively inherited through include statements; previously, even if you set a custom class loader when parsing a file, it would not be used for parsing a classpath resource included from the file.
• parseString() and parseReader() now support include statements in the parsed string or reader
• in -Dconfig.resource=name, name can start with a "/" or not, doesn't matter
• if you implement ConfigIncluder, you should most likely also implement ConfigIncluderFile, ConfigIncluderURL, and ConfigIncluderClasspath. You should also use ConfigIncludeContext.parseOptions() if appropriate.
• cycles in include statements (self-includes) are now detected and result in a nicer error instead of stack overflow
• since 0.3.0, there is an obscure incompatible semantic change in that self-referential substitutions where the cycle could be broken by partially resolving the object now "look backward" and may fail to resolve. This is not incompatible with the version included in Play/Akka 2.0 because in that version this obscure case just threw an exception. But in 0.3.0 there were cases that worked that now work differently. You are very unlikely to be affected by this.
• Play/Akka 2.0 do not and will not have the new stuff in this version due to the serialization break, they will update next time they bump their ABI.

0.3.1: August 6, 2012

• 0.3.1 is a backport of the "-Dconfig.resource=name can start with a /" fix to 0.3.0
• 0.3.1 was published on Maven Central while 0.3.0 and earlier are only on Typesafe's repository
• 0.3.1 is mostly intended for use by Akka 2.0.x (and therefore Play 2.0.x), everyone else should use a higher version number

0.3.0: March 1, 2012

• ConfigFactory methods now use the thread's context class loader by default, and have overloads so you can specify a class loader. Because jars may come with "reference.conf" in the jar, a config must always be loaded with the same class loader as the jar using the config.
• ConfigValue instances are now serializable
• new methods ConfigObject.withoutKey, ConfigObject.withOnlyKey, Config.withoutPath, Config.withOnlyPath allow subsetting configs more easily.
• better handle complex interdependent substitutions (the ${foo} syntax) without getting confused; just about anything that makes conceptual sense should now work. Only inherently circular config files should fail.
• some minor documentation fixes.