Skip to content

Latest commit

 

History

History
56 lines (36 loc) · 1.95 KB

install_brick.md

File metadata and controls

56 lines (36 loc) · 1.95 KB
Raw

Introduction

Installation instructions for the "brique" written in live during the General Meeting "FFDN" of 2015. To be completed.

VPN reservation

This step is specific to your internet provider. Get the required certificates and/or password for VPN connection to the client, as well as specific OpenVPN directives if necessary.

For example, Neutrinet needs the topology subnet directive (for Windows compatibility \o/)

Download ISO

Go to http://repo.labriqueinter.net/ (get latest http://repo.labriqueinter.net/labriqueinternet_latest.img.tar.gz)

Save ISO to to SD card using dd:

sudo dd if=labriqueinternet_latest.img of=/dev/sdX

Insert SD card into the box, plug in ethernet cable (to connect to local network) and turn it on.

Post-configuration

Connect to yunohost.local or through SSH, using the IP adress and update packages.

  • user: root
  • password: olinux
apt-get update && apt-get dist-upgrade

Then connect using https and accept the self signed certificate. Then follow instructions and proceed to postinstall.

  • Choose domain name
  • Choose administrator password

You will be redirected to the admin panel, where you will be able to add your first user.

Then, you can install applications using "applications -> install" or fill the bottom field with a Github repository URL:

Go to http://monurl.com/vpnadmin (or the custom value you picked):

(neutrinet) Fill with vpn.neutrinet.be copy/paste the generated vpn conf into "advanced" section (Note that IPv6 script isn't ready yet so don't try to configure it... If you're wreckless, you can get it at https://vpn.neutrinet.be:8000)

scp auth client.crt client.key ca.crt dans /etc/openvpn/