riscv: Add kprobes supported

This patch enables "kprobe & kretprobe" to work with ftrace
interface. It utilized software breakpoint as single-step
mechanism.

Some instructions which can't be single-step executed must be
simulated in kernel execution slot, such as: branch, jal, auipc,
la ...

Some instructions should be rejected for probing and we use a
blacklist to filter, such as: ecall, ebreak, ...

We use ebreak & c.ebreak to replace origin instruction and the
kprobe handler prepares an executable memory slot for out-of-line
execution with a copy of the original instruction being probed.
In execution slot we add ebreak behind original instruction to
simulate a single-setp mechanism.

The patch is based on packi's work [1] and csky's work [2].
 - The kprobes_trampoline.S is all from packi's patch
 - The single-step mechanism is new designed for riscv without hw
   single-step trap
 - The simulation codes are from csky
 - Frankly, all codes refer to other archs' implementation

 [1] https://lore.kernel.org/linux-riscv/20181113195804.22825-1-me@packi.ch/
 [2] https://lore.kernel.org/linux-csky/20200403044150.20562-9-guoren@kernel.org/

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Co-developed-by: Patrick Stählin <me@packi.ch>
Signed-off-by: Patrick Stählin <me@packi.ch>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Patrick Stählin <me@packi.ch>
Cc: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Author: guoren83

arch/riscv/Kconfig

@@ -71,6 +71,8 @@ config RISCV
 	select HAVE_GCC_PLUGINS
 	select HAVE_GENERIC_VDSO if MMU && 64BIT
 	select HAVE_IRQ_TIME_ACCOUNTING
+	select HAVE_KPROBES
+	select HAVE_KRETPROBES
 	select HAVE_PCI
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_REGS

arch/riscv/include/asm/kprobes.h

@@ -11,4 +11,44 @@
 
 #include <asm-generic/kprobes.h>
 
+#ifdef CONFIG_KPROBES
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/percpu.h>
+
+#define __ARCH_WANT_KPROBES_INSN_SLOT
+#define MAX_INSN_SIZE			2
+
+#define flush_insn_slot(p)		do { } while (0)
+#define kretprobe_blacklist_size	0
+
+#include <asm/probes.h>
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned int status;
+};
+
+/* Single step context for kprobe */
+struct kprobe_step_ctx {
+	unsigned long ss_pending;
+	unsigned long match_addr;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned int kprobe_status;
+	unsigned long saved_status;
+	struct prev_kprobe prev_kprobe;
+	struct kprobe_step_ctx ss_ctx;
+};
+
+void arch_remove_kprobe(struct kprobe *p);
+int kprobe_fault_handler(struct pt_regs *regs, unsigned int trapnr);
+bool kprobe_breakpoint_handler(struct pt_regs *regs);
+bool kprobe_single_step_handler(struct pt_regs *regs);
+void kretprobe_trampoline(void);
+void __kprobes *trampoline_probe_handler(struct pt_regs *regs);
+
+#endif /* CONFIG_KPROBES */
 #endif /* _ASM_RISCV_KPROBES_H */

arch/riscv/include/asm/probes.h

@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_RISCV_PROBES_H
+#define _ASM_RISCV_PROBES_H
+
+typedef u32 probe_opcode_t;
+typedef bool (probes_handler_t) (u32 opcode, unsigned long addr, struct pt_regs *);
+
+/* architecture specific copy of original instruction */
+struct arch_probe_insn {
+	probe_opcode_t *insn;
+	probes_handler_t *handler;
+	/* restore address after simulation */
+	unsigned long restore;
+};
+
+#ifdef CONFIG_KPROBES
+typedef u32 kprobe_opcode_t;
+struct arch_specific_insn {
+	struct arch_probe_insn api;
+};
+#endif
+
+#endif /* _ASM_RISCV_PROBES_H */

arch/riscv/kernel/Makefile

@@ -30,6 +30,7 @@ obj-y	+= riscv_ksyms.o
 obj-y	+= stacktrace.o
 obj-y	+= cacheinfo.o
 obj-y	+= patch.o
+obj-y	+= probes/
 obj-$(CONFIG_MMU) += vdso.o vdso/
 
 obj-$(CONFIG_RISCV_M_MODE)	+= traps_misaligned.o

arch/riscv/kernel/probes/Makefile

@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_KPROBES)		+= kprobes.o decode-insn.o simulate-insn.o
+obj-$(CONFIG_KPROBES)		+= kprobes_trampoline.o
+CFLAGS_REMOVE_simulate-insn.o = $(CC_FLAGS_FTRACE)

arch/riscv/kernel/probes/decode-insn.c

@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+#include <asm/sections.h>
+
+#include "decode-insn.h"
+#include "simulate-insn.h"
+
+/* Return:
+ *   INSN_REJECTED     If instruction is one not allowed to kprobe,
+ *   INSN_GOOD_NO_SLOT If instruction is supported but doesn't use its slot.
+ */
+enum probe_insn __kprobes
+riscv_probe_decode_insn(probe_opcode_t *addr, struct arch_probe_insn *api)
+{
+	probe_opcode_t insn = le32_to_cpu(*addr);
+
+	/*
+	 * Reject instructions list:
+	 */
+	RISCV_INSN_REJECTED(system,		insn);
+	RISCV_INSN_REJECTED(fence,		insn);
+
+	/*
+	 * Simulate instructions list:
+	 * TODO: the REJECTED ones below need to be implemented
+	 */
+#ifdef CONFIG_RISCV_ISA_C
+	RISCV_INSN_REJECTED(c_j,		insn);
+	RISCV_INSN_REJECTED(c_jr,		insn);
+	RISCV_INSN_REJECTED(c_jal,		insn);
+	RISCV_INSN_REJECTED(c_jalr,		insn);
+	RISCV_INSN_REJECTED(c_beqz,		insn);
+	RISCV_INSN_REJECTED(c_bnez,		insn);
+	RISCV_INSN_REJECTED(c_ebreak,		insn);
+#endif
+
+	RISCV_INSN_REJECTED(auipc,		insn);
+	RISCV_INSN_REJECTED(branch,		insn);
+
+	RISCV_INSN_SET_SIMULATE(jal,		insn);
+	RISCV_INSN_SET_SIMULATE(jalr,		insn);
+
+	return INSN_GOOD;
+}

arch/riscv/kernel/probes/decode-insn.h

@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef _RISCV_KERNEL_KPROBES_DECODE_INSN_H
+#define _RISCV_KERNEL_KPROBES_DECODE_INSN_H
+
+#include <asm/sections.h>
+#include <asm/kprobes.h>
+
+enum probe_insn {
+	INSN_REJECTED,
+	INSN_GOOD_NO_SLOT,
+	INSN_GOOD,
+};
+
+enum probe_insn __kprobes
+riscv_probe_decode_insn(probe_opcode_t *addr, struct arch_probe_insn *asi);
+
+#endif /* _RISCV_KERNEL_KPROBES_DECODE_INSN_H */