examples/WebServer/WebServer.ino

/****************************************************************************************************************************
  WebServer.ino - Simple Arduino web server sample for ESP8266 AT-command shield
  For STM32F/L/H/G/WB/MP1 with built-in Ethernet LAN8742A (Nucleo-144, DISCOVERY, etc) or W5x00/ENC28J60 shield/module

  EthernetWebServer_SSL_STM32 is a library for STM32 using the Ethernet shields to run WebServer and Client with/without SSL

  Use SSLClient Library code from https://github.com/OPEnSLab-OSU/SSLClient

  Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer_SSL_STM32
 *****************************************************************************************************************************/

#include "defines.h"

int reqCount = 0;                // number of requests received

EthernetServer server(80);

void setup()
{
  // Open serial communications and wait for port to open:
  Serial.begin(115200);

  while (!Serial && millis() < 5000);

  Serial.println("\nStart WebServer on " + String(BOARD_NAME) + " with " + String(SHIELD_TYPE));

#if USE_ETHERNET_GENERIC
  Serial.println(ETHERNET_GENERIC_VERSION);
#endif

  Serial.println(ETHERNET_WEBSERVER_SSL_STM32_VERSION);

#if !(USE_BUILTIN_ETHERNET)
#if (USING_SPI2)
#if defined(CUR_PIN_MISO)
  ET_LOGWARN(F("Default SPI pinout:"));
  ET_LOGWARN1(F("MOSI:"), CUR_PIN_MOSI);
  ET_LOGWARN1(F("MISO:"), CUR_PIN_MISO);
  ET_LOGWARN1(F("SCK:"),  CUR_PIN_SCK);
  ET_LOGWARN1(F("SS:"),   CUR_PIN_SS);
  ET_LOGWARN(F("========================="));
#endif
#else
  ET_LOGWARN(F("Default SPI pinout:"));
  ET_LOGWARN1(F("MOSI:"), MOSI);
  ET_LOGWARN1(F("MISO:"), MISO);
  ET_LOGWARN1(F("SCK:"),  SCK);
  ET_LOGWARN1(F("SS:"),   SS);
  ET_LOGWARN(F("========================="));
#endif
#endif

#if !(USE_BUILTIN_ETHERNET || USE_UIP_ETHERNET)
  // For other boards, to change if necessary
#if ( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )
  Ethernet.init (USE_THIS_SS_PIN);

#elif USE_CUSTOM_ETHERNET
  // You have to add initialization for your Custom Ethernet here
  // This is just an example to setCSPin to USE_THIS_SS_PIN, and can be not correct and enough
  //Ethernet.init(USE_THIS_SS_PIN);

#endif  //( ( USE_ETHERNET_GENERIC || USE_ETHERNET_ENC )
#endif

  // start the ethernet connection and the server:
  // Use DHCP dynamic IP and random mac
  uint16_t index = millis() % NUMBER_OF_MAC;
  // Use Static IP
  //Ethernet.begin(mac[index], ip);
  Ethernet.begin(mac[index]);

  Serial.print(F("Connected! IP address: "));
  Serial.println(Ethernet.localIP());

  // start the web server on port 80
  server.begin();
}


void loop()
{
  // listen for incoming clients
  EthernetClient client = server.available();

  if (client)
  {
    Serial.println(F("New client"));
    // an http request ends with a blank line
    bool currentLineIsBlank = true;

    while (client.connected())
    {
      if (client.available())
      {
        char c = client.read();
        Serial.write(c);

        // if you've gotten to the end of the line (received a newline
        // character) and the line is blank, the http request has ended,
        // so you can send a reply
        if (c == '\n' && currentLineIsBlank)
        {
          Serial.println(F("Sending response"));

          // send a standard http response header
          // use \r\n instead of many println statements to speedup data send
          client.print(
            "HTTP/1.1 200 OK\r\n"
            "Content-Type: text/html\r\n"
            "Connection: close\r\n"  // the connection will be closed after completion of the response
            "Refresh: 20\r\n"        // refresh the page automatically every 20 sec
            "\r\n");
          client.print("<!DOCTYPE HTML>\r\n");
          client.print("<html>\r\n");
          client.print("<h1>Hello World from ");
          client.print(BOARD_NAME);
          client.print("!</h1>\r\n");
          client.print("Requests received: ");
          client.print(++reqCount);
          client.print("<br>\r\n");
          client.print("Analog input A0: ");
          client.print(analogRead(0));
          client.print("<br>\r\n");
          client.print("</html>\r\n");
          break;
        }

        if (c == '\n')
        {
          // you're starting a new line
          currentLineIsBlank = true;
        }
        else if (c != '\r')
        {
          // you've gotten a character on the current line
          currentLineIsBlank = false;
        }
      }
    }

    // give the web browser time to receive the data
    delay(10);

    // close the connection:
    client.stop();
    Serial.println(F("Client disconnected"));
  }
}