gap_windows.go

package bluetooth

import (
	"fmt"
	"unsafe"

	"github.com/go-ole/go-ole"
	"github.com/saltosystems/winrt-go"
	"github.com/saltosystems/winrt-go/windows/devices/bluetooth"
	"github.com/saltosystems/winrt-go/windows/devices/bluetooth/advertisement"
	"github.com/saltosystems/winrt-go/windows/devices/bluetooth/genericattributeprofile"
	"github.com/saltosystems/winrt-go/windows/foundation"
	"github.com/saltosystems/winrt-go/windows/storage/streams"
)

// Address contains a Bluetooth MAC address.
type Address struct {
	MACAddress
}

// Scan starts a BLE scan. It is stopped by a call to StopScan. A common pattern
// is to cancel the scan when a particular device has been found.
func (a *Adapter) Scan(callback func(*Adapter, ScanResult)) (err error) {
	if a.watcher != nil {
		// Cannot scan more than once: which one should ScanStop()
		// stop?
		return errScanning
	}

	a.watcher, err = advertisement.NewBluetoothLEAdvertisementWatcher()
	if err != nil {
		return
	}
	defer func() {
		_ = a.watcher.Release()
		a.watcher = nil
	}()

	// Set scanning mode to active so we receive scan responses
	// from devices in advertising mode
	err = a.watcher.SetScanningMode(advertisement.BluetoothLEScanningModeActive)
	if err != nil {
		return
	}

	// Listen for incoming BLE advertisement packets.
	// We need a TypedEventHandler<TSender, TResult> to listen to events, but since this is a parameterized delegate
	// its GUID depends on the classes used as sender and result, so we need to compute it:
	// TypedEventHandler<BluetoothLEAdvertisementWatcher, BluetoothLEAdvertisementReceivedEventArgs>
	eventReceivedGuid := winrt.ParameterizedInstanceGUID(
		foundation.GUIDTypedEventHandler,
		advertisement.SignatureBluetoothLEAdvertisementWatcher,
		advertisement.SignatureBluetoothLEAdvertisementReceivedEventArgs,
	)
	handler := foundation.NewTypedEventHandler(ole.NewGUID(eventReceivedGuid), func(instance *foundation.TypedEventHandler, sender, arg unsafe.Pointer) {
		args := (*advertisement.BluetoothLEAdvertisementReceivedEventArgs)(arg)
		result := getScanResultFromArgs(args)
		callback(a, result)
	})
	defer handler.Release()

	token, err := a.watcher.AddReceived(handler)
	if err != nil {
		return
	}
	defer a.watcher.RemoveReceived(token)

	// Wait for when advertisement has stopped by a call to StopScan().
	// Advertisement doesn't seem to stop right away, there is an
	// intermediate Stopping state.
	stoppingChan := make(chan error)
	// TypedEventHandler<BluetoothLEAdvertisementWatcher, BluetoothLEAdvertisementWatcherStoppedEventArgs>
	eventStoppedGuid := winrt.ParameterizedInstanceGUID(
		foundation.GUIDTypedEventHandler,
		advertisement.SignatureBluetoothLEAdvertisementWatcher,
		advertisement.SignatureBluetoothLEAdvertisementWatcherStoppedEventArgs,
	)
	stoppedHandler := foundation.NewTypedEventHandler(ole.NewGUID(eventStoppedGuid), func(_ *foundation.TypedEventHandler, _, arg unsafe.Pointer) {
		args := (*advertisement.BluetoothLEAdvertisementWatcherStoppedEventArgs)(arg)
		errCode, err := args.GetError()
		if err != nil {
			// Got an error while getting the error value, that shouldn't
			// happen.
			stoppingChan <- fmt.Errorf("failed to get stopping error value: %w", err)
		} else if errCode != bluetooth.BluetoothErrorSuccess {
			// Could not stop the scan? I'm not sure when this would actually
			// happen.
			stoppingChan <- fmt.Errorf("failed to stop scanning (error code %d)", errCode)
		}
		close(stoppingChan)
	})
	defer stoppedHandler.Release()

	token, err = a.watcher.AddStopped(stoppedHandler)
	if err != nil {
		return
	}
	defer a.watcher.RemoveStopped(token)

	err = a.watcher.Start()
	if err != nil {
		return err
	}

	// Wait until advertisement has stopped, and finish.
	return <-stoppingChan
}

func getScanResultFromArgs(args *advertisement.BluetoothLEAdvertisementReceivedEventArgs) ScanResult {
	// parse bluetooth address
	addr, _ := args.GetBluetoothAddress()
	adr := Address{}
	for i := range adr.MAC {
		adr.MAC[i] = byte(addr)
		addr >>= 8
	}
	sigStrength, _ := args.GetRawSignalStrengthInDBm()
	result := ScanResult{
		RSSI:    sigStrength,
		Address: adr,
	}

	var manufacturerData []ManufacturerDataElement
	if winAdv, err := args.GetAdvertisement(); err == nil && winAdv != nil {
		vector, _ := winAdv.GetManufacturerData()
		size, _ := vector.GetSize()
		for i := uint32(0); i < size; i++ {
			element, _ := vector.GetAt(i)
			manData := (*advertisement.BluetoothLEManufacturerData)(element)
			companyID, _ := manData.GetCompanyId()
			buffer, _ := manData.GetData()
			manufacturerData = append(manufacturerData, ManufacturerDataElement{
				CompanyID: companyID,
				Data:      bufferToSlice(buffer),
			})
		}
	}

	// Note: the IsRandom bit is never set.
	advertisement, _ := args.GetAdvertisement()
	localName, _ := advertisement.GetLocalName()
	result.AdvertisementPayload = &advertisementFields{
		AdvertisementFields{
			LocalName:        localName,
			ManufacturerData: manufacturerData,
		},
	}

	return result
}

func bufferToSlice(buffer *streams.IBuffer) []byte {
	dataReader, _ := streams.DataReaderFromBuffer(buffer)
	defer dataReader.Release()
	bufferSize, _ := buffer.GetLength()
	if bufferSize == 0 {
		return nil
	}
	data, _ := dataReader.ReadBytes(bufferSize)
	return data
}

// StopScan stops any in-progress scan. It can be called from within a Scan
// callback to stop the current scan. If no scan is in progress, an error will
// be returned.
func (a *Adapter) StopScan() error {
	if a.watcher == nil {
		return errNotScanning
	}
	return a.watcher.Stop()
}

// Device is a connection to a remote peripheral.
type Device struct {
	device  *bluetooth.BluetoothLEDevice
	session *genericattributeprofile.GattSession
}

// Connect starts a connection attempt to the given peripheral device address.
//
// On Linux and Windows, the IsRandom part of the address is ignored.
func (a *Adapter) Connect(address Address, params ConnectionParams) (Device, error) {
	var winAddr uint64
	for i := range address.MAC {
		winAddr += uint64(address.MAC[i]) << (8 * i)
	}

	// IAsyncOperation<BluetoothLEDevice>
	bleDeviceOp, err := bluetooth.BluetoothLEDeviceFromBluetoothAddressAsync(winAddr)
	if err != nil {
		return Device{}, err
	}

	// We need to pass the signature of the parameter returned by the async operation:
	// IAsyncOperation<BluetoothLEDevice>
	if err := awaitAsyncOperation(bleDeviceOp, bluetooth.SignatureBluetoothLEDevice); err != nil {
		return Device{}, fmt.Errorf("error connecting to device: %w", err)
	}

	res, err := bleDeviceOp.GetResults()
	if err != nil {
		return Device{}, err
	}

	// The returned BluetoothLEDevice is set to null if FromBluetoothAddressAsync can't find the device identified by bluetoothAddress
	if uintptr(res) == 0x0 {
		return Device{}, fmt.Errorf("device with the given address was not found")
	}

	bleDevice := (*bluetooth.BluetoothLEDevice)(res)

	// Creating a BluetoothLEDevice object by calling this method alone doesn't (necessarily) initiate a connection.
	// To initiate a connection, we need to set GattSession.MaintainConnection to true.
	dID, err := bleDevice.GetBluetoothDeviceId()
	if err != nil {
		return Device{}, err
	}

	// Windows does not support explicitly connecting to a device.
	// Instead it has the concept of a GATT session that is owned
	// by the calling program.
	gattSessionOp, err := genericattributeprofile.GattSessionFromDeviceIdAsync(dID) // IAsyncOperation<GattSession>
	if err != nil {
		return Device{}, err
	}

	if err := awaitAsyncOperation(gattSessionOp, genericattributeprofile.SignatureGattSession); err != nil {
		return Device{}, fmt.Errorf("error getting gatt session: %w", err)
	}

	gattRes, err := gattSessionOp.GetResults()
	if err != nil {
		return Device{}, err
	}
	newSession := (*genericattributeprofile.GattSession)(gattRes)
	// This keeps the device connected until we set maintain_connection = False.
	if err := newSession.SetMaintainConnection(true); err != nil {
		return Device{}, err
	}

	return Device{bleDevice, newSession}, nil
}

// Disconnect from the BLE device. This method is non-blocking and does not
// wait until the connection is fully gone.
func (d Device) Disconnect() error {
	defer d.device.Release()
	defer d.session.Release()

	if err := d.session.Close(); err != nil {
		return err
	}
	if err := d.device.Close(); err != nil {
		return err
	}

	return nil
}

// RequestConnectionParams requests a different connection latency and timeout
// of the given device connection. Fields that are unset will be left alone.
// Whether or not the device will actually honor this, depends on the device and
// on the specific parameters.
//
// On Windows, this call doesn't do anything.
func (d Device) RequestConnectionParams(params ConnectionParams) error {
	// TODO: implement this using
	// BluetoothLEDevice.RequestPreferredConnectionParameters.
	return nil
}