Commands

A short and concise overview of commands available with your current installation is available using man yabai or for the current development version as a → rendered document.

This wiki page aims to explain every command available in detail.

Message passing interface

Messages can be passed to a running yabai instance using yabai --message (or yabai -m in short). These messages aim to have a very intuitive format that should be easy to remember.

The format for commands is yabai -m <category> <command>.

You might remember this format from the previous chapter about → configuration options, which used the same message passing interface. The following commands are different in that they can all be issued after yabai has been configured.

The → example skhdrc shows how you can integrate these commands with [→ skhd], a hotkey utility for macOS. This file is an example showing how to control yabai using keyboard shortcuts. Note that it is not a good example for all keyboard layouts and is highly opinionated. It is recommended to build your own skhdrc file from scratch to suit your needs.

Display commands

The arrangement indices for displays can be seen in the Displays > Arrangement preference pane in the System Preferences.

Focus display

# Focus display focused before the current one (so you can alternate)
yabai -m config display --focus last

# Focus previous display by arrangement index
yabai -m config display --focus prev

# Focus next display by arrangement index
yabai -m config display --focus next

# Focus display with arrangement index 2
yabai -m config display --focus 2

Space commands

The mission-control indices for spaces can be seen when mission control is active.

Focus space

# Focus space focused before the current one (so you can alternate)
yabai -m config space --focus last

# Focus previous space by mission-control index
yabai -m config space --focus prev

# Focus next space by mission-control index
yabai -m config space --focus next

# Focus space with mission-control index 2
yabai -m config space --focus 2

Create and destroy spaces

# Create space on the active display
yabai -m config space --create

# Delete focused space and focus first space on display
yabai -m config space --destroy

Move spaces

# Move space left
yabai -m space --move prev

# Move space right
yabai -m space --move next

# Send space to display 2 (by display arrangement index)
yabai -m space --display 2

Modify window tree

In bsp spaces commands can be used to modify the window tree, affecting all windows on the space.

# Balance out all windows both horizontally and vertically 
#   to occupy the same space
yabai -m space --balance

# Flip the tree horizontally
yabai -m space --mirror x-axis

# Flip the tree vertically
yabai -m space --mirror y-axis

# Rotate the window tree clock-wise (options: 90, 180, 270 degree)
yabai -m space --rotate 90

Modify space layout

# Set layout of the space (options: bsp, float)
yabai -m space --layout bsp

Modify padding and gaps

# toggle padding on the current space
yabai -m space --toggle padding

# add 10 to the top padding, subtract 5 from the left and right padding
# format: top:bottom:left:right (rel = relative)
yabai -m space --padding rel:10:0:-5:-5

# set all padding to 20 (abs = absolute)
yabai -m space --padding abs:20:20:20:20

# toggle gap between windows on the current space
yabai -m space --toggle gaps

# add 10 to gap between windows (rel = relative)
yabai -m space --gap rel:10

# set gap between windows to 0 (abs = absolute)
yabai -m space --gap abs:0

Window commands

Window commands are special in that they can either be operated on the focused window or on any visible window if a) the window id is supplied and b) the command makes sense.

If you want to operate on an unfocused, visible window, replace yabai -m window with yabai -m window window-id below. This is mostly for automation. Window identifiers can be obtained through signals and the query system.

Focus window

# focus window in direction of focused window (options: north, east, south, west)
yabai -m window --focus east

# focus window that was previously focused
yabai -m window --focus last

# focus previous or next window in window tree (options: prev, next)
yabai -m window --focus prev

# focus window under cursor
yabai -m window --focus mouse

Move window

Tiled window can be swapped with other windows.

# swap window position and size with window in direction of focused window
#   (options: north, east, south, west)
yabai -m window --swap north

# swap with previously focused window
yabai -m window --swap last

# swap with previous or next window in window tree (options: prev, next)
yabai -m window --swap prev

# swap with window under cursor
yabai -m window --swap mouse

Tiled windows can also be re-inserted ("warped") at other windows.

# warp at window in direction of focused window
#   (options: north, east, south, west)
yabai -m window --warp north

# warp at previously focused window
yabai -m window --warp last

# warp at previous or next window in window tree (options: prev, next)
yabai -m window --warp prev

# warp at window under cursor
yabai -m window --warp mouse

Floating windows can be moved and resized to absolute coordinates and sizes.

# move focused window to (100, 200)
yabai -m window --move abs:100:200

# change window size to (500, 800)
yabai -m window --resize abs:500:800

Floating windows can also be moved and resized using relative coordinates and sizes.

# move focused window 100 to the right, 200 up
yabai -m window --move rel:100:-200

# grow window by 100 to the right, shrink by 200 at the bottom
#   (options: top, left, bottom, right, top_left, top_right, bottom_right, bottom_left)
yabai -m window --resize bottom_right:100:-200

# change window size to (500, 800)
yabai -m window --resize abs:500:800

Floating windows can also be moved and resized at the same time by placing them on a grid. The grid format is <rows>:<cols>:<start-x>:<start-y>:<width>:<height>, where rows and cols are how many rows and columns there are in total, start-x and start-y are the start indices for the row and column and width and height are how many rows and columns the window spans.

The grid respects the padding enabled for the space.

# move focused window to occupy the left two thirds of the screen. 
yabai -m window --grid 1:3:0:0:2:1

Move window to another space or display. As with other commands this works using prev, next, last and mission-control index or arrangement index respectively.

# move window to previous space
yabai -m window --space prev

# move window to display focused before the current one
yabai -m window --display last

# move window to space 2
yabai -m window --space 2

Tiled windows may also be zoomed to either occupy the parent nodes space or the full screen, and windows may also be moved into their own space ("native fullscreen").

# options: zoom-parent, zoom-fullscreen, native-fullscreen
yabai -m window --toggle zoom-parent

Whether a window is split vertically or horizontally with its parent node can be toggled as well.

yabai -m window --toggle split

Toggle window properties

You can also toggle some other window properties.

# toggle whether the focused window should be tiled (only on bsp spaces)
yabai -m window --toggle float

# toggle whether the focused window should have a border
yabai -m window --toggle border

# toggle whether the focused window should be shown on all spaces
yabai -m window --toggle sticky

Automation with rules and signals

Rules and signals can be used to automate window management. Rules define how windows that match app name and optionally title with the rule should be managed, and signals are asynchronous external actions that can be triggered on window management events, e.g. when a window is destroyed or the space is changed.

The → rules docs and → signals docs have detailed information on these. If you need help creating such an automation, feel free to search the issue board and, if no result was found, create an issue asking for help.

Here are some example rules and signals.

# float system preferences
yabai -m rule --add app="^System Preferences$" manage=off

# show digital colour meter topmost and on all spaces
yabai -m rule --add app="^Digital Colou?r Meter$" sticky=on

# refresh my Übersicht bar when the space changes
yabai -m signal --add event=space_changed \
    action="osascript -e 'tell application \"Übersicht\" to refresh widget id \"spaces-widget\"'"

Querying information

yabai can also query information about displays, spaces and windows. There are a total of 12 queries available, which can be enhanced easily using → jq to filter the JSON formatted output.

	yabai -m query --displays	yabai -m query --spaces	yabai -m query --windows
	Query all displays	Query all spaces	Query all windows
--display [arrangement index]	Query focused/selected display	Query all spaces on focused/selected display	Query all windows on focused/selected display
--space [mission-control index]	Query display with focused/selected space	Query focused/selected space	Query all windows on focused/selected space
--window [window id]	Query display with focused/selected window	Query space with focused/selected window	Query focused/selected window

For example, to get the window identifiers of all windows on space 2, you could run the following command:

yabai -m query --windows --space 2 | jq '.[].id'