Table of Contents
This document provides an overview of the pillars of telemetry that OpenTelemetry supports and defines important fundamental terms.
Additional term definitions can be found in the glossary.
A distributed trace is a set of events, triggered as a result of a single logical operation, consolidated across various components of an application. A distributed trace contains events that cross process, network and security boundaries. A distributed trace may be initiated when someone presses a button to start an action on a website - in this example, the trace will represent calls made between the downstream services that handled the chain of requests initiated by this button being pressed.
Traces in OpenTelemetry are defined implicitly by their Spans. In particular, a Trace can be thought of as a directed acyclic graph (DAG) of Spans, where the edges between Spans are defined as parent/child relationship.
For example, the following is an example Trace made up of 6 Spans:
Causal relationships between Spans in a single Trace
[Span A] ←←←(the root span)
|
+------+------+
| |
[Span B] [Span C] ←←←(Span C is a `child` of Span A)
| |
[Span D] +---+-------+
| |
[Span E] [Span F]
Sometimes it's easier to visualize Traces with a time axis as in the diagram below:
Temporal relationships between Spans in a single Trace
––|–––––––|–––––––|–––––––|–––––––|–––––––|–––––––|–––––––|–> time
[Span A···················································]
[Span B··············································]
[Span D··········································]
[Span C········································]
[Span E·······] [Span F··]
Each Span encapsulates the following state:
- An operation name
- A start and finish timestamp
- Attributes: A list of key-value pairs.
- A set of zero or more Events, each of which is itself a tuple (timestamp, name, Attributes). The name must be strings.
- Parent's Span identifier.
- Links to zero or more causally-related Spans (via the SpanReference of those related Spans).
- SpanReference information required to reference a Span. See below.
Represents all the information that identifies Span in the Trace and MUST be propagated to child Spans and across process boundaries. A SpanReference contains the tracing identifiers and the options that are propagated from parent to child Spans.
- TraceId is the identifier for a trace. It is worldwide unique with practically sufficient probability by being made as 16 randomly generated bytes. TraceId is used to group all spans for a specific trace together across all processes.
- SpanId is the identifier for a span. It is globally unique with practically sufficient probability by being made as 8 randomly generated bytes. When passed to a child Span this identifier becomes the parent span id for the child Span.
- TraceFlags represents the options for a trace. It is represented as 1
byte (bitmap).
- Sampling bit - Bit to represent whether trace is sampled or not (mask
0x1).
- Sampling bit - Bit to represent whether trace is sampled or not (mask
- Tracestate carries tracing-system specific context in a list of key value pairs. Tracestate allows different vendors propagate additional information and inter-operate with their legacy Id formats. For more details see this.
A Span may be linked to zero or more other Spans (defined by SpanReference) that are causally related. Links can point to Spans inside a single Trace or across different Traces. Links can be used to represent batched operations where a Span was initiated by multiple initiating Spans, each representing a single incoming item being processed in the batch.
Another example of using a Link is to declare the relationship between the originating and following trace. This can be used when a Trace enters trusted boundaries of a service and service policy requires the generation of a new Trace rather than trusting the incoming Trace context. The new linked Trace may also represent a long running asynchronous data processing operation that was initiated by one of many fast incoming requests.
When using the scatter/gather (also called fork/join) pattern, the root operation starts multiple downstream processing operations and all of them are aggregated back in a single Span. This last Span is linked to many operations it aggregates. All of them are the Spans from the same Trace. And similar to the Parent field of a Span. It is recommended, however, to not set parent of the Span in this scenario as semantically the parent field represents a single parent scenario, in many cases the parent Span fully encloses the child Span. This is not the case in scatter/gather and batch scenarios.
OpenTelemetry allows to record raw measurements or metrics with predefined aggregation and set of labels.
Recording raw measurements using OpenTelemetry API allows to defer to end-user the decision on what aggregation algorithm should be applied for this metric as well as defining labels (dimensions). It will be used in client libraries like gRPC to record raw measurements "server_latency" or "received_bytes". So end user will decide what type of aggregated values should be collected out of these raw measurements. It may be simple average or elaborate histogram calculation.
Recording of metrics with the pre-defined aggregation using OpenTelemetry API is not less important. It allows to collect values like cpu and memory usage, or simple metrics like "queue length".
The main classes used to record raw measurements are Measure and
Measurement. List of Measurements alongside the additional context can be
recorded using OpenTelemetry API. So user may define to aggregate those
Measurements and use the context passed alongside to define additional
dimensions of the resulting metric.
Measure describes the type of the individual values recorded by a library. It
defines a contract between the library exposing the measurements and an
application that will aggregate those individual measurements into a Metric.
Measure is identified by name, description and a unit of values.
Measurement describes a single value to be collected for a Measure.
Measurement is an empty interface in API surface. This interface is defined in
SDK.
The base class for all types of pre-aggregated metrics is called Metric. It
defines basic metric properties like a name and labels. Classes inheriting from
the Metric define their aggregation type as well as a structure of individual
measurements or Points. API defines the following types of pre-aggregated
metrics:
- Counter metric to report instantaneous measurement. Counter values can go
up or stay the same, but can never go down. Counter values cannot be
negative. There are two types of counter metric values -
doubleandlong. - Gauge metric to report instantaneous measurement of a numeric value. Gauges can
go both up and down. The gauges values can be negative. There are two types of
gauge metric values -
doubleandlong.
API allows to construct the Metric of a chosen type. SDK defines the way to
query the current value of a Metric to be exported.
Every type of a Metric has it's API to record values to be aggregated. API
supports both - push and pull model of setting the Metric value.
Metrics data model is defined in SDK and is based on metrics.proto. This data model is used by all the OpenTelemetry exporters as an input. Different exporters have different capabilities (e.g. which data types are supported) and different constraints (e.g. which characters are allowed in label keys). Metrics is intended to be a superset of what's possible, not a lowest common denominator that's supported everywhere. All exporters consume data from Metrics Data Model via a Metric Producer interface defined in OpenTelemetry SDK.
Because of this, Metrics puts minimal constraints on the data (e.g. which characters are allowed in keys), and code dealing with Metrics should avoid validation and sanitization of the Metrics data. Instead, pass the data to the backend, rely on the backend to perform validation, and pass back any errors from the backend.
Log Data Model defines how logs and events are understood by OpenTelemetry.
In addition to trace propagation, OpenTelemetry provides a simple mechanism for propagating
name/value pairs, called Baggage. Baggage is intended for
indexing observability events in one service with attributes provided by a prior service in
the same transaction. This helps to establish a causal relationship between these events.
While Baggage can be used to prototype other cross-cutting concerns, this mechanism is primarily intended
to convey values for the OpenTelemetry observability systems.
These values can be consumed from Baggage and used as additional dimensions for metrics,
or additional context for logs and traces. Some examples:
- a web service can benefit from including context around what service has sent the request
- a SaaS provider can include context about the API user or token that is responsible for that request
- determining that a particular browser version is associated with a failure in an image processing service
For backward compatibility with OpenTracing, Baggage is propagated as Baggage when
using the OpenTracing bridge. New concerns with different criteria should consider creating a new
cross-cutting concern to cover their use-case; they may benefit from the W3C encoding format but
use a new HTTP header to convey data throughout a distributed trace.
Resource captures information about the entity for which telemetry is
recorded. For example, metrics exposed by a Kubernetes container can be linked
to a resource that specifies the cluster, namespace, pod, and container name.
Resource may capture an entire hierarchy of entity identification. It may
describe the host in the cloud and specific container or an application running
in the process.
Note, that some of the process identification information can be associated with telemetry automatically by OpenTelemetry SDK or specific exporter. See OpenTelemetry proto for an example.
All of OpenTelemetry cross-cutting concerns, such as traces and metrics,
share an underlying Context mechanism for storing state and
accessing data across the lifespan of a distributed transaction.
See the Context
OpenTelemetry uses Propagators to serialize and deserialize cross-cutting concern values
such as Spans (usually only the SpanReference portion) and Baggage. Different Propagator types define the restrictions
imposed by a specific transport and bound to a data type.
The Propagators API currently defines one Propagator type:
TextMapPropagatorinjects values into and extracts values from carriers as text.
The OpenTelemetry collector is a set of components that can collect traces, metrics and eventually other telemetry data (e.g. logs) from processes instrumented by OpenTelementry or other monitoring/tracing libraries (Jaeger, Prometheus, etc.), do aggregation and smart sampling, and export traces and metrics to one or more monitoring/tracing backends. The collector will allow to enrich and transform collected telemetry (e.g. add additional attributes or scrub personal information).
The OpenTelemetry collector has two primary modes of operation: Agent (a daemon running locally with the application) and Collector (a standalone running service).
Read more at OpenTelemetry Service Long-term Vision.
The inspiration of the project is to make every library and application observable out of the box by having them call OpenTelemetry API directly. However, many libraries will not have such integration, and as such there is a need for a separate library which would inject such calls, using mechanisms such as wrapping interfaces, subscribing to library-specific callbacks, or translating existing telemetry into the OpenTelemetry model.
A library that enables OpenTelemetry observability for another library is called an Instrumentation Library.
An instrumentation library should be named to follow any naming conventions of the instrumented library (e.g. 'middleware' for a web framework).
If there is no established name, the recommendation is to prefix packages with "opentelemetry-instrumentation", followed by the instrumented library name itself. Examples include:
- opentelemetry-instrumentation-flask (Python)
- @opentelemetry/instrumentation-grpc (Javascript)
OpenTelemetry defines standard names and values of Resource attributes and Span attributes.
The type of the attribute SHOULD be specified in the semantic convention for that attribute. See more details about Attributes.