无法启动minikube

[ertu426]

重现问题所需的命令：
minikube start --image-mirror-country='cn'

失败的命令的完整输出：

😄 Debian 10.10 上的 minikube v1.25.2
✨ 根据现有的配置文件使用 docker 驱动程序
👍 Starting control plane node minikube in cluster minikube
🚜 Pulling base image ...
🏃 Updating the running docker "minikube" container ...
❗ This container is having trouble accessing https://registry.cn-hangzhou.aliyuncs.com/google_containers
💡 To pull new external images, you may need to configure a proxy: https://minikube.sigs.k8s.io/docs/reference/networking/proxy/
🐳 正在 Docker 20.10.12 中准备 Kubernetes v1.23.3…
▪ kubelet.housekeeping-interval=5m
💢 initialization failed, will try again: wait: /bin/bash -c "sudo env PATH="/var/lib/minikube/binaries/v1.23.3:$PATH" kubeadm init --config /var/tmp/minikube/kubeadm.yaml --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests,DirAvailable--var-lib-minikube,DirAvailable--var-lib-minikube-etcd,FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml,FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml,FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml,FileAvailable--etc-kubernetes-manifests-etcd.yaml,Port-10250,Swap,Mem,SystemVerification,FileContent--proc-sys-net-bridge-bridge-nf-call-iptables": Process exited with status 1
stdout:
[init] Using Kubernetes version: v1.23.3
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'

stderr:
[WARNING Swap]: swap is enabled; production deployments should disable swap unless testing the NodeSwap feature gate of the kubelet
[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'
error execution phase preflight: [preflight] Some fatal errors occurred:
[ERROR ImagePull]: failed to pull image registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:v1.8.6: output: Error response from daemon: Get "https://registry.cn-hangzhou.aliyuncs.com/v2/": dial tcp: lookup registry.cn-hangzhou.aliyuncs.com on 192.168.49.1:53: read udp 192.168.49.2:56082->192.168.49.1:53: i/o timeout
, error: exit status 1
[preflight] If you know what you are doing, you can make a check non-fatal with --ignore-preflight-errors=...
To see the stack trace of this error execute with --v=5 or higher

💣 开启 cluster 时出错: wait: /bin/bash -c "sudo env PATH="/var/lib/minikube/binaries/v1.23.3:$PATH" kubeadm init --config /var/tmp/minikube/kubeadm.yaml --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests,DirAvailable--var-lib-minikube,DirAvailable--var-lib-minikube-etcd,FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml,FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml,FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml,FileAvailable--etc-kubernetes-manifests-etcd.yaml,Port-10250,Swap,Mem,SystemVerification,FileContent--proc-sys-net-bridge-bridge-nf-call-iptables": Process exited with status 1
stdout:
[init] Using Kubernetes version: v1.23.3
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'

stderr:
[WARNING Swap]: swap is enabled; production deployments should disable swap unless testing the NodeSwap feature gate of the kubelet
[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'
error execution phase preflight: [preflight] Some fatal errors occurred:
[ERROR ImagePull]: failed to pull image registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:v1.8.6: output: Error response from daemon: Get "https://registry.cn-hangzhou.aliyuncs.com/v2/": dial tcp: lookup registry.cn-hangzhou.aliyuncs.com on 192.168.49.1:53: read udp 192.168.49.2:60385->192.168.49.1:53: i/o timeout
, error: exit status 1
[preflight] If you know what you are doing, you can make a check non-fatal with --ignore-preflight-errors=...
To see the stack trace of this error execute with --v=5 or higher

╭───────────────────────────────────────────────────────────────────────────────────────────╮
│ │
│ 😿 If the above advice does not help, please let us know: │
│ 👉 https://github.com/kubernetes/minikube/issues/new/choose │
│ │
│ Please run minikube logs --file=logs.txt and attach logs.txt to the GitHub issue. │
│ │
╰───────────────────────────────────────────────────────────────────────────────────────────╯

❌ Exiting due to GUEST_START: wait: /bin/bash -c "sudo env PATH="/var/lib/minikube/binaries/v1.23.3:$PATH" kubeadm init --config /var/tmp/minikube/kubeadm.yaml --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests,DirAvailable--var-lib-minikube,DirAvailable--var-lib-minikube-etcd,FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml,FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml,FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml,FileAvailable--etc-kubernetes-manifests-etcd.yaml,Port-10250,Swap,Mem,SystemVerification,FileContent--proc-sys-net-bridge-bridge-nf-call-iptables": Process exited with status 1
stdout:
[init] Using Kubernetes version: v1.23.3
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'

stderr:
[WARNING Swap]: swap is enabled; production deployments should disable swap unless testing the NodeSwap feature gate of the kubelet
[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'
error execution phase preflight: [preflight] Some fatal errors occurred:
[ERROR ImagePull]: failed to pull image registry.cn-hangzhou.aliyuncs.com/google_containers/coredns:v1.8.6: output: Error response from daemon: Get "https://registry.cn-hangzhou.aliyuncs.com/v2/": dial tcp: lookup registry.cn-hangzhou.aliyuncs.com on 192.168.49.1:53: read udp 192.168.49.2:60385->192.168.49.1:53: i/o timeout
, error: exit status 1
[preflight] If you know what you are doing, you can make a check non-fatal with --ignore-preflight-errors=...
To see the stack trace of this error execute with --v=5 or higher

╭───────────────────────────────────────────────────────────────────────────────────────────╮
│ │
│ 😿 If the above advice does not help, please let us know: │
│ 👉 https://github.com/kubernetes/minikube/issues/new/choose │
│ │
│ Please run minikube logs --file=logs.txt and attach logs.txt to the GitHub issue. │
│ │
╰───────────────────────────────────────────────────────────────────────────────────────────╯

minikube logs命令的输出：

E0408 00:53:29.838173 36262 logs.go:192] command /bin/bash -c "sudo /var/lib/minikube/binaries/v1.23.3/kubectl describe nodes --kubeconfig=/var/lib/minikube/kubeconfig" failed with error: /bin/bash -c "sudo /var/lib/minikube/binaries/v1.23.3/kubectl describe nodes --kubeconfig=/var/lib/minikube/kubeconfig": Process exited with status 1
stdout:

stderr:
The connection to the server localhost:8443 was refused - did you specify the right host or port?
output: "\n** stderr ** \nThe connection to the server localhost:8443 was refused - did you specify the right host or port?\n\n** /stderr **"

❗ unable to fetch logs for: describe nodes

使用的操作系统版本：
UOS 家庭版 21.2

»»»» uname -a
Linux admin 5.10.0-amd64-desktop #20.00.42.09-cbg SMP Fri Mar 11 16:15:29 CST 2022 x86_64 GNU/Linux

»»»» lsb_release -a
No LSB modules are available.
Distributor ID: Uos
Description: UnionTech OS Desktop 20 Home
Release: 20
Codename: eagle