-
Notifications
You must be signed in to change notification settings - Fork 2.2k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
No reconnect after a short failure of the wifi Network #1274
Comments
I do not know if you already did something. 16388 : WIFI : Connected! AP: SMC (78:8A:20:D1:9B:D9) Ch: 6 Duration: 3787 ms |
It is strange the reconnect gets an authorize failure. |
I have same issue with sonoff TH10/TH16, but with relaese mega-20180420 it's mitigated. |
@workgroupengineering Is core 2.4.0 already using LWIP2? |
Yes this is changes log. On 2.4.x and > there is more issues related wi-fi. I think maybe it's better to go back to 2.3. |
I think I have same issue after update to mega-20180420 today. Wemos D1 mini. The board is in AP mode with SSID [unit name]_[node number]. I can't connect via WIFI as the password is not standard - I believe I didn't change... |
On my Android phone, I have to tap an extra notification bar on the top of the screen to allow connecting to the ESP, since it is not connected to the internet. |
version mega-20180422 is working now for me on my Wemos D1 mini |
Is this still an issue? If so, please re-open. |
After a short failure of the wifi (about 0.2 seconds) there is no reconnect.
The device wants to start in AP mode.
Hardware Wemos D1
Software ESP_Easy_mega-20180417_test_ESP8266_4096.bin
12584 : INFO : Plugins: 70 [Normal] [Testing] (core 2_4_0)
12584 : EVENT: System#Wake
12629 : WIFI : Connecting SMC attempt #0
12644 : EVENT: System#Boot
12652 : ACT :
12665 : ACT : Publish ESP-201/IP,0.0.0.0
12676 : ACT : timerSet,1,60
12686 : ACT :
12711 : WD : Uptime 0 ConnectFailures 0 FreeMem 15368
12742 : DS : Temperature: 20.62 (28-ff-b8-ea-b4-16-3-ed)
12744 : EVENT: DS18b20#Temperature=20.62
13688 : SW : Switch state 0 Output value 0
13691 : EVENT: Motion#Pir=0.00
13706 : ACT : gpio,14,0
13707 : SW : GPIO 14 Set to 0
13966 : SW : Switch state 0 Output value 0
13969 : EVENT: Led#Led2=0.00
15794 : WIFI : Connected! AP: SMC (78:8A:20:D1:9B:D9) Ch: 6 Duration: 3061 ms
15795 : EVENT: WiFi#ChangedAccesspoint
16463 : WIFI : DHCP IP: 192.168.0.201 (ESP-201-1) GW: 192.168.0.3 SN: 255.255.255.0 duration: 772 ms
16474 : EVENT: WiFi#Connected
16574 : MQTT : Intentional reconnect
16620 : MQTT : Connected to broker with client ID: ESPClient_5C:CF:7F:0B:68:52
16622 : Subscribed to: ESP-201/#
16623 : EVENT: MQTT#Connected
16932 : Current Time Zone: DST time start: 2018-03-25 02:00:00 offset: 120 minSTD time start: 2018-10-28 03:00:00 offset: 60 min
16933 : EVENT: Time#Initialized
16953 : EVENT: Clock#Time=Wed,23:18
42710 : WD : Uptime 1 ConnectFailures 0 FreeMem 14152
49770 : EVENT: Clock#Time=Wed,23:19
50909 : EVENT: WiFi#Disconnected
50925 : WIFI : Disconnected! Reason: 'Unspecified' Connected for 35 s
50925 : WIFI : Connecting SMC attempt #0
50941 : MQTT : Connection lost
50941 : EVENT: MQTT#Disconnected
52714 : EVENT: WiFi#Disconnected
52729 : WIFI : Disconnected! Reason: 'Auth fail' Connected for 1784 ms
52730 : WIFI : Connection Failed
52830 : WIFI : Set WiFi to AP
52835 : WIFI : Error while starting AP Mode with SSID: ESP-201_1 IP: 192.168.4.1
72710 : WD : Uptime 1 ConnectFailures 0 FreeMem 14896
72865 : DS : Temperature: 20.62 (28-ff-b8-ea-b4-16-3-ed)
72866 : EVENT: DS18b20#Temperature=20.62
72986 : EVENT: Rules#Timer=1
72995 : ACT : Publish ESP-201/IP,0.0.0.0
73007 : ACT : Publish ESP-201/MAC,5C:CF:7F:0B:68:52
73018 : ACT : Publish ESP-201/Time,23:19:24
73030 : ACT : Publish ESP-201/Uptime,1
73040 : ACT : Publish ESP-201/RSSI,0
73050 : ACT : Publish ESP-201/SSID,--
73061 : ACT : Publish ESP-201/BSSID,00:00:00:00:00:00
73071 : ACT : Publish ESP-201/CH,0
73082 : ACT : Publish ESP-201/SYSHEAP,14520
73092 : ACT : timerSet,1,60
77008 : SW : Switch state 1 Output value 1
77012 : EVENT: Motion#Pir=1.00
79341 : SW : Switch state 0 Output value 0
79343 : EVENT: Motion#Pir=0.00
79358 : ACT : gpio,14,0
79360 : SW : GPIO 14 Set to 0
The text was updated successfully, but these errors were encountered: