LSP.sublime-settings

{
  // To discover more customization and example client configurations, see
  // https://lsp.sublimetext.io

  // Show permanent language server status in the status bar.
  "show_view_status": true,

  // Run the server's formatProvider (if supported) on a file before saving.
  // This option is also supported in syntax-specific settings and/or in the
  // "settings" section of project files.
  "lsp_format_on_save": false,

  // A dictionary of code action identifiers that should be triggered on save.
  //
  // Code action identifiers are not officially standardized so refer to specific
  // server's documentation on what is supported but `source.fixAll` is commonly
  // used to apply fix-on-save code actions.
  //
  // This option is also supported in syntax-specific settings and/or in the
  // "settings" section of project files. Settings from all those places will be
  // merged and more specific (syntax and project) settings will override less
  // specific (from LSP or Sublime settings).
  //
  // Only "source.*" actions are supported.
  "lsp_code_actions_on_save": {
    // "source.fixAll": true,
    // "source.organizeImports": true,
  },

  // The amount of time the save tasks (like code actions on save,
  // formatting or WillSaveWaitUntil) are each allowed to run for.
  "on_save_task_timeout_ms": 2000,

  // Open the diagnostics panel automatically on save when diagnostics level is
  // equal to or less than:
  // none: 0 (never open the panel automatically)
  // error: 1
  // warning: 2
  // info: 3
  // hint: 4
  "show_diagnostics_panel_on_save": 2,

  // Show errors and warnings count in the status bar
  "show_diagnostics_count_in_view_status": false,

  // Show the diagnostics description of the code
  // under the cursor in status bar if available.
  "show_diagnostics_in_view_status": true,

  // Show highlights and gutter markers in the file views for diagnostics
  // with level equal to or less than:
  // none: 0 (never show)
  // error: 1
  // warning: 2
  // info: 3
  // hint: 4
  "show_diagnostics_severity_level": 4,

  // Only show diagnostics in the panel with level equal to or less than:
  // error: 1
  // warning: 2
  // info: 3
  // hint: 4
  "diagnostics_panel_include_severity_level": 4,

  // Delay showing diagnostics by this many milliseconds.
  // The delay will only kick into action when previously there were
  // no diagnostics in the view. If there were previous diagnostics in the view,
  // then the delay setting here is ignored and diagnostics are updated
  // immediately.
  "diagnostics_delay_ms": 0,

  // Add an additional delay when the auto-complete widget is currently visible.
  // Just like the above "diagnostics_delay_ms", the unit is milliseconds.
  // The total amount of delay would be
  //
  //    diagnostics_delay_ms + diagnostics_additional_delay_auto_complete_ms
  //
  // See also: "diagnostics_delay_ms".
  "diagnostics_additional_delay_auto_complete_ms": 0,

  // Highlighting style of "highlights": accentuating nearby text entities that
  // are related to the one under your cursor.
  // Valid values are "fill", "underline", "stippled", or "".
  // When set to the empty string (""), no document highlighting is requested.
  "document_highlight_style": "underline",

  // Highlight style of code diagnostics.
  // Can be a string, or a mapping of string->string for severity-based styling.
  // Valid string values are "box", "underline", "stippled", "squiggly" or "".
  // When set to a valid string value, all severities will use that style.
  // When set to the empty string (""), no diagnostics are drawn.
  // When disabled, gutter markers are still drawn, unless "diagnostics_gutter_marker"
  // is set to "".
  // Diagnostics which span multiple lines are always drawn with the "box" style.
  // See also: "show_multiline_diagnostics_highlights".
  "diagnostics_highlight_style": {
    "error": "squiggly",
    "warning": "squiggly",
    "info": "stippled",
    "hint": "stippled"
  },

  // Gutter marker for code diagnostics.
  // Valid values are "dot", "circle", "bookmark", "sign" or ""
  "diagnostics_gutter_marker": "dot",

  // Show code actions:
  // "annotation" - show an annotation on the right when code actions are available.
  // "bulb" - show a bulb in the gutter when code actions are available.
  // "" - don't show code actions.
  // Note: Due to API limitations, the "bulb" icon can not be clicked so the code actions can only be triggered
  // using a keyboard shortcut or the context menu.
  

  // Enable semantic highlighting:
  
  // Add the following to your color scheme
  //  "rules":
  //  [
  //     {
  //         "scope": "meta.semantic-token.lsp",
  //         "background": "#01010101"
  //     }
  //  ]

  // Note: most color schemes don't utilise many available SublimeText scopes,
  // this will result in subpar semantic highlighting. Follow the example given
  // below to customize your color_scheme.

  // syntax for scopes: meta.semantic.tokenType.modifierType
  // modifierTypes are optional.

  // example rules:
  // {
  //     "scope": "meta.semantic.variable",
  //     "foreground": "var(blue)",
  // },
  // {
  //     "scope": "meta.semantic.method",
  //     "foreground": "var(yellow)",
  // },
  // {
  //     "scope": "meta.semantic.method.static",
  //     "foreground": "var(red)",
  // },
  "enable_semantic_tokens": false,


  "show_code_actions": "annotation",

  // Show code lens:
  // "annotation" - show an annotation on the right when code actions are available
  // "phantom" - show a phantom on the top when code actions are available
  "show_code_lens": "annotation",

  // Show code actions in hover popup if available
  "show_code_actions_in_hover": true,

  // Show diagnostics spanning multiple lines in the view (as outlines).
  // See also: "diagnostics_highlight_style".
  "show_multiline_diagnostics_highlights": true,

  // Show symbol action links in hover popup if available
  "show_symbol_action_links": true,

  // Disable Sublime Text's snippet completions.
  "inhibit_snippet_completions": false,

  // Disable Sublime Text's word completions. When set to `true`, this also disables Sublime Text's internal completion
  // sorting algorithm and instead uses the sorting defined by the relevant language server.
  "inhibit_word_completions": true,

  // Show symbol references in Sublime's quick panel instead of the bottom panel.
  "show_references_in_quick_panel": false,

  // The maximum number of characters (approximately) before wrapping in the popup.
  "popup_max_characters_width": 120,

  // The maximum number of characters (approximately) before a scrollbar appears.
  "popup_max_characters_height": 1000,

  // Show verbose debug messages in the sublime console.
  "log_debug": false,

  // Log communication from and to language servers.
  // Set to an array of values:
  // - "panel" - log to the LSP Language Servers output panel
  // - "remote" - start a local websocket server on port 9981. Can be connected to with
  //              a websocket client to receive the log messages in real time.
  // For backward-compatibility, when set to "true", enables the "panel" logger and when
  // set to "false" disables logging.
  // This output panel can be toggled from the command palette with the
  // command "LSP: Toggle Log Panel".
  "log_server": [
    // "panel",
    // "remote",
  ],

  // When logging to the "panel" (see "log_server"), if the params of the request or
  // response or notification exceed this many characters, then print a <snip> to
  // the panel instead. If you don't want a limit, set this to zero.
  "log_max_size": 8192,

  // User server configurations can be used to:
  // - partially override a configuration in the "default_clients", or
  // - create new configurations.
  //
  // It is **highly recommended** to download the LSP-json helper package. This
  // is a package that auto-installs a JSON language server that will provide
  // auto-completions for all keys in this file, and many others as well.
  // See: https://packagecontrol.io/packages/LSP-json
  //
  // "clients":
  // {
  //   // Each new server configuration must have the following structure.
  //   "CLIENT_NAME": // some human-friendly name
  //   {
  //     # ----------- The following three settings are **required** -----------
  //
  //     // Enable or disable this client configuration.
  //     "enabled": true,
  //
  //     // The command line required to run the server.
  //     "command": ["pyls"],
  //
  //     // This selector filters which views apply to this configuration, in
  //     // the same way that a selector for a build system filters which build
  //     // system applies to which view. To determine the base scope of your
  //     // view, click on Tools > Developer > Show Scope Name. The first line
  //     // in the popup is the base scope.
  //     "selector": "source.python",
  //
  //     # ------ From this point onward, each key-value is **optional** -------
  //
  //     // An optional list of URI schemes which this client configuration
  //     // should attach to. A well-known URI scheme is the `file` scheme. The
  //     // scheme `buffer` is used as in-memory scratch buffer (that is when
  //     // you create a new unsaved tab). Furthermore, the scheme `res` is used
  //     // to denote Sublime Text resource files inside .sublime-package files,
  //     // viewable with the _View Package File_ command from the
  //     // _Command Palette_. Other URI schemes exist, but require different
  //     // considerations for different language servers.  If this setting is
  //     // not specified, then only the `file` scheme is used, meaning that this
  //     // client configuration will only attach to views that are backed by a
  //     // file on disk.
  //     "schemes": ["file", "buffer", "res"],
  //
  //     // When you want to connect to the language server via TCP (on
  //     // localhost), specify the port here. If you put a value of 0 here,
  //     // then LSP will select a free port number on localhost. In that case,
  //     // you can use the string templates $port or ${port} in the "command".
  //     // The syntax "{port}" is also allowed, but deprecated in favor of
  //     // $port and ${port}.
  //     "tcp_port": 1234,
  //
  //     // Sent to server once using workspace/didChangeConfiguration
  //     // notification
  //     "settings": { },
  //
  //     // Sent once to server in initialize request
  //     "initializationOptions": { },
  //
  //     // Disable providers if so desired
  //     "disabled_capabilities": { },
  //
  //     // Extra variables to override/add to language server's environment.
  //     "env": { },
  //   }
  // }
  "clients": {},

  // Default clients configuration
  // DO NOT MODIFY THIS SETTING!
  // Use "clients" to override settings instead!
  "default_clients": {
    "rust-analyzer": {
      "command": [
        "rust-analyzer"
      ],
      "selector": "source.rust",
    },
    "clangd": {
      "command": [
        "clangd"
      ],
      "selector": "source.c | source.c++ | source.objc | source.objc++",
      "auto_complete_selector": "punctuation.accessor | (meta.preprocessor.include string - punctuation.definition.string.end)",
    },
    "erlang-ls": {
      "command": [
        "erlang_ls",
        "--transport",
        "stdio"
      ],
      "selector": "source.erlang",
    },
    "ocaml": {
      "command": [
        "ocaml-language-server",
        "--stdio"
      ],
      "selector": "source.reason | source.ocaml",
    },
    "gopls": {
      "command": [
        "gopls"
      ],
      "selector": "source.go",
    },
    "polymer-ide": {
      "command": [
        "polymer-editor-service"
      ],
      "selector": "text.html.basic | source.html | source.js | source.css | source.json",
      "settings": {
        "polymer-ide.analyzeWholePackage": false,
        "polymer-ide.fixOnSave": false
      }
    },
    "ruby": {
      "command": [
        "solargraph",
        "stdio"
      ],
      "selector": "source.ruby | text.html.ruby",
      "initializationOptions": {
        "diagnostics": false
      },
    },
    "sorbet": {
      "command": [
        "srb",
        "tc",
        "--typed",
        "true",
        "--enable-all-experimental-lsp-features",
        "--lsp",
        "--disable-watchman"
      ],
      "selector": "source.ruby | text.html.ruby",
    },
  }
}