Migrated to dzen

dotfiles/dzen/status-clock.sh

@@ -0,0 +1,17 @@
+#!/bin/bash
+
+width=600
+font_pixelsize=16
+line_height=$((font_pixelsize + 4))
+lines=8
+height=$((line_height * (lines + 1)))
+
+bottom_gap=20
+read _ s_width <<< "$(xwininfo -root | egrep Width)"
+read _ s_height <<< "$(xwininfo -root | egrep Height)"
+
+{
+echo '^fg(#a00)Calendar^fg()'
+cal -3s
+echo '^uncollapse()'
+} | dzen2 -x $((s_width - width)) -y $((s_height - height - bottom_gap)) -w $width -l $lines -h $line_height -sa center -fn "Envy Code R:pixelsize=$font_pixelsize" -e 'leaveslave=exit;button3=exit;button4=scrollup;button5=scrolldown;onstart=scrollhome' -p

dotfiles/dzen/status-cpu.sh

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+urxvtc -name 'dzen-status-cpu' -title 'CPU Status' \
+	    -geometry "160x40" +sb \
+	    -e htop --sort-key PERCENT_CPU

dotfiles/dzen/status-fs.sh

@@ -0,0 +1,24 @@
+#!/bin/bash
+
+width=600
+font_pixelsize=16
+line_height=$((font_pixelsize + 4))
+lines=10
+height=$((line_height * (lines + 1)))
+
+bottom_gap=20
+read _ s_width <<< "$(xwininfo -root | egrep Width)"
+read _ s_height <<< "$(xwininfo -root | egrep Height)"
+
+{
+echo '^fg(#a00)Filesystems Status^fg()'
+df -h | while read fs size used avail usep mountp; do
+	if [[ "$fs" == "Filesystem" ]]; then
+		# Header
+		printf "^fg(#00a)%-10s %8s %8s %8s %8s %-10s^fg()\n" "$fs" $size $used $avail $usep "$mountp"
+	else
+		printf "^fg(#aaa)%-10s %8s %8s %8s %8s %-10s^fg()\n" "$fs" $size $used $avail $usep "$mountp"
+	fi
+done
+echo '^uncollapse()'
+} | dzen2 -x $((s_width - width)) -y $((s_height - height - bottom_gap)) -w $width -l $lines -h $line_height -sa center -fn "Envy Code R:pixelsize=$font_pixelsize" -e 'leaveslave=exit;button3=exit;button4=scrollup;button5=scrolldown;onstart=scrollhome' -p

dotfiles/dzen/status-mem.sh

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+urxvtc -name 'dzen-status-mem' -title 'CPU Status' \
+	    -geometry "160x40" +sb \
+	    -e htop --sort-key PERCENT_MEM

dotfiles/dzen/status-mpd.sh

@@ -0,0 +1,36 @@
+#!/bin/bash
+# $1 is the timeout (`dzen2 -p $1` doesn't seem to work in this script)
+
+width=720
+font_pixelsize=16
+line_height=$((font_pixelsize + 4))
+lines=3
+height=$((line_height * (lines + 1) + 5 * 2))
+
+bottom_gap=20
+read _ s_width <<< "$(xwininfo -root | egrep Width)"
+read _ s_height <<< "$(xwininfo -root | egrep Height)"
+
+[[ $1 -gt 0 ]] && end_time=$(($(date +%s%N) + $1 * 1000000000))
+
+while :; do
+# Update last fm play count and cover art
+lf-playcount-image.sh
+playcount=$(cut -f 2 -d \  "/tmp/lf-playcount-image")
+# Preparing cover art
+image_filename="/tmp/lf-images/$(cut -f 4 -d \  "/tmp/lf-playcount-image" | tr -t \/ -)"
+image_filename_xpm="${image_filename%.*}.xpm"
+[[ ! -f "$image_filename_xbm" ]] && convert -scale 80x80 "$image_filename" "$image_filename_xpm"
+
+echo -n '^ib(1)'
+i=0
+mpc -f '%artist% - %title% - %album%' | while read line; do
+	echo -n "^pa(5;$((i*line_height + 5)))$line"
+	((i++))
+done
+i=3
+echo -n "^pa(5;$((i*line_height + 5)))Played $playcount times"
+echo "^pa($((width-80-5));5)^i($image_filename_xpm)"
+sleep 1
+[[ $1 -gt 0 ]] && [[ $(date +%s%N) > "$end_time" ]] && break
+done | dzen2 -x $((s_width - width)) -y $((s_height - height - bottom_gap)) -w $width -h $height -ta left -fn "Envy Code R:pixelsize=$font_pixelsize" -e 'leavetitle=exit;button3=exit;button4=scrollup;button5=scrolldown;onstart=uncollapse'

dotfiles/dzen/status.sh

@@ -0,0 +1,189 @@
+#!/bin/bash
+# Copyright 2010 Yu-Jie Lin
+# BSD License
+# 
+#  * update_cpu() is a partially ported version of gcpubar.c from dzen source
+#    code, which is licensed under the MIT/X Consortium License,
+#    copyright Robert Manea.
+
+# Configuration
+###############
+
+BG='#303030'
+FG='#aaa'
+FONT='Envy Code R-9'
+
+# UI = update interval, PAD is for padding nano seconds
+PAD="000000000"
+ui_cpu="1$PAD"
+ui_mem="10$PAD"
+ui_fs="60$PAD"
+ui_thm="10$PAD"
+ui_sound="200000000"
+ui_clock="1$PAD"
+ui_mpd="1$PAD"
+# Controlling final refresh rate, the following is 0.2 seconds
+ui_output="200000000"
+
+# Interval of each iteration of main loop, should be equal to or smaller than $ui_output
+SLEEP=0.2
+
+# Should not be changed
+ui_network="1$PAD"
+unset PAD
+
+# Components update functions
+#############################
+
+update_cpu () {
+	# Ported from gcpubar.c
+	local ncpu cpu_val cpu_maxval
+	# 0 1:user 2:unice 3:sys 4:idle 5:iowait
+	ncpu=($(grep 'cpu ' /proc/stat))
+
+	ncpu[1]=$((ncpu[1]+ncpu[2]))
+	cpu_val=$((ncpu[1]-ocpu[1] + ncpu[3]-ocpu[3] + ncpu[5]-ocpu[5]))
+	cpu_maxval=$((cpu_val + ncpu[4]-ocpu[4]))
+
+	cpu_percentage=$((100 * cpu_val / cpu_maxval))
+
+	ocpu=("${ncpu[@]}")
+
+	printf -v cpu_dzen "^ca(1,./status-cpu.sh)^i(icons/cpu.xbm)^ca() %3s%%" $cpu_percentage
+	update_next_ts cpu
+	}
+
+update_mem () {
+	read _ _ mem_used mem_free <<< "$(free -b | grep -)"
+
+	mem_total=$((mem_used + mem_free))
+	mem_used_MB=$((mem_used / 1024 / 1024))
+	mem_used_percentage=$((100 * mem_used / mem_total))
+
+	printf -v mem_dzen "^ca(1,./status-mem.sh)^i(icons/mem.xbm)^ca() %sMB %s%%" ${mem_used_MB} ${mem_used_percentage}
+
+	update_next_ts mem
+	}
+
+update_fs () {
+	# 0:dev 1:size 2:used 3:free 4:percentage 5:mount point
+	read _ _ fs_root_used _ fs_root_percentage _ <<< "$(df -h / | tail -1)"
+
+	fs_dzen="^ca(1,./status-fs.sh)^i(icons/diskette.xbm)^ca() ${fs_root_used}B $fs_root_percentage"
+
+	update_next_ts fs
+	}
+
+update_thm () {
+	read _ thm _ </proc/acpi/thermal_zone/THM/temperature
+	thm_dzen="^i(icons/temp.xbm) ${thm}°C"
+
+	update_next_ts thm
+	}
+
+update_clock () {
+	clock_dzen="^ca(1,./status-clock.sh)^i(icons/clock.xbm)^ca() $(date +'%A, %B %d, %Y %H:%M:%S')"
+
+	update_next_ts clock
+	}
+
+update_sound () {
+	read _ _ _ _ volume _ sound_enabled <<< "$(amixer get Master | grep 'Front Left:')"
+
+	volume=${volume#[}
+	volume=${volume%]}
+	sound_enabled=${sound_enabled#[}
+	sound_enabled=${sound_enabled%]}
+
+	sound_dzen="^ca(1,urxvtc -name 'dzen-status-sound' -title 'Sound Mixer' -geometry 160x40 -e alsamixer)^i(icons/spkr_01.xbm)^ca() "
+	[[ "$sound_enabled" == "on" ]] && sound_dzen="$sound_dzen^fg(#0a0)" || sound_dzen="$sound_dzen^fg(#a00)"
+	sound_dzen="$sound_dzen$volume^fg()"
+
+	update_next_ts sound
+	}
+
+update_network () {
+	local ifx=ppp0 n_rxb n_txb
+	read n_rxb < /sys/class/net/$ifx/statistics/rx_bytes
+	read n_txb < /sys/class/net/$ifx/statistics/tx_bytes
+	rx_rate=$(((n_rxb - rxb) / 1024))
+	tx_rate=$(((n_txb - txb) / 1024))
+	rxb=$n_rxb
+	txb=$n_txb
+
+	printf -v network_dzen "^i(icons/net_wired.xbm) %3s/%3s KB/s" $tx_rate $rx_rate
+	update_next_ts network
+	}
+
+update_mpd () {
+	local mpd_text
+	pgrep mpd &>/dev/null && {
+		mpd_text="$(mpc -f '[%title% [- %artist%]]' | head -1)"
+		printf -v mpd_dzen "^ca(1,./status-mpd.sh)^i(icons/note.xbm) ^fg(#aa0)%-32s^fg()^ca()" "${mpd_text::32}"
+		if [[ "$mpd_text" != "$old_mpd_text" ]]; then
+			# New song, popup info box!
+			killall status-mpd.sh &>/dev/null
+			./status-mpd.sh 10 &
+			old_mpd_text="$mpd_text"
+		fi
+	} || {
+		mpd_dzen="^ca(1,mpd;mpdscribble)^fg(#888)^i(icons/note.xbm)^fg()^ca()"
+	}
+	update_next_ts mpd
+	}
+
+# Controlling timestamp functions
+#################################
+
+update_ts_current () {
+	ts_current=$(date +%s%N)
+	}
+
+update_next_ts () {
+	# $1 is the variable name
+	eval "next_$1=\$((ts_current+ui_$1))"
+	}
+
+# Initialization
+################
+
+cd ~/.dzen
+
+update_ts_current
+update_cpu
+update_mem
+update_fs
+update_network
+update_thm
+update_clock
+update_sound
+update_mpd
+
+# Main loop
+###########
+
+read _ s_width <<< "$(xwininfo -root | egrep Width)"
+
+while :; do
+	update_ts_current
+	# Time to output?
+	if [[ "$next_output" < "$ts_current" ]]; then
+		# Update each component
+		[[ "$next_cpu" < "$ts_current" ]] && update_cpu
+		[[ "$next_mem" < "$ts_current" ]] && update_mem
+		[[ "$next_fs" < "$ts_current" ]] && update_fs
+		[[ "$next_network" < "$ts_current" ]] && update_network
+		[[ "$next_thm" < "$ts_current" ]] && update_thm
+		[[ "$next_sound" < "$ts_current" ]] && update_sound
+		[[ "$next_clock" < "$ts_current" ]] && update_clock
+		[[ "$next_mpd" < "$ts_current" ]] && update_mpd
+
+		# Composing a new output
+		output="$cpu_dzen $mem_dzen $fs_dzen $network_dzen $thm_dzen $mpd_dzen $sound_dzen $clock_dzen "
+		[[ "$last_output" != "$output" ]] && echo "$output" && last_output=output
+		update_next_ts output
+	fi
+	# Using built-in `read` with timeout instead of external `sleep $SLEEP`
+	#read -t $SLEEP
+	sleep $SLEEP
+done | dzen2 -bg "$BG" -fg "$FG" -fn "$FONT" -w $((s_width / 2)) -x $((s_width / 2)) -y -1 -ta right -e 'button3='

dotfiles/fluxbox/apps

@@ -34,3 +34,9 @@
 	[app] (title=.*Minefield)
 	[app] (title=.*Vimperator)
 [end]
+
+# dzen
+[app] (name=dzen-status-.*)
+	[Position] (CENTER) {0 0}
+	[Layer] {2}
+[end]

dotfiles/fluxbox/init

@@ -16,9 +16,9 @@ session.screen0.clientMenu.usePixmap:	true
 session.screen0.titlebar.left:	
 session.screen0.titlebar.right:	Minimize Maximize Close 
 session.screen0.menu.alpha:	216
-session.screen0.toolbar.widthPercent:	100
+session.screen0.toolbar.widthPercent:	50
 session.screen0.toolbar.autoHide:	false
-session.screen0.toolbar.tools:	clock, iconbar, systemtray
+session.screen0.toolbar.tools:	systemtray, iconbar
 session.screen0.toolbar.onhead:	1
 session.screen0.toolbar.layer:	Dock
 session.screen0.toolbar.height:	0

dotfiles/fluxbox/startup

@@ -30,7 +30,8 @@ sleep 1
 	#nm-applet &
 	#gkrellm -w &
     #mpd
-	conky -q &
+#	conky -q &
+	dzen-status.sh &
 #	urxvtc -e screen &
 	#start-pulseaudio-x11
 	[[ $(lsusb -v | grep -i mouse) ]] && synclient TouchpadOff=1 

dotfiles/fluxbox/styles/3am

@@ -78,8 +78,8 @@ menu.hilite.color:				#404040
 
 ################################################################### TOOLBAR ###
 
-toolbar.bevelWidth:				1
-toolbar.borderWidth:			1
+toolbar.bevelWidth:				0
+toolbar.borderWidth:			0
 
 toolbar.button.picColor:		#c0c0c0
 toolbar.button.pressed.picColor:#000000