-
Notifications
You must be signed in to change notification settings - Fork 18
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
getting error when flashing with tftp #19
Comments
From @Whocareswhowins on October 25, 2016 18:51 Closing down so no ideas Sent from my iPhone 4s! On 21 Oct 2016, at 09:24, flintec notifications@github.com wrote: i get a error from the arduino when im flashing using the tftp client take a look at this. ˆC¡*¥¹é Ariadne for Arduino Uno, Version 0.5 any ideas? — |
From @flintec on October 21, 2016 8:24
i get a error from the arduino when im flashing using the tftp client take a look at this.
this is the output fom the serial port.
ˆC¡*¥¹é Ariadne for Arduino Uno, Version 0.5
Net: EEPROM settings
Net: Address: 0xC0.0xA8.0x01.0x78
Net: Subnet: 0xFF.0xFF.0xFF.0x00
Net: Gateway: 0xC0.0xA8.0x01.0x01
Net: MAC: 0x12.0x34.0x56.0x78.0x9A.0xBC
Net: Network init done
Tftp: Init socket to port 0x0045
Tftp: TFTP server init done
Tftp: DataPort: 0xB779
Tftp: Processing packet of size 0x001E
Tftp: Set up return address
Tftp: This is block 0x426C with opcode 0x0002 and data length 0x0012
Tftp: Write request
Tftp: Init socket to port 0xB779
Tftp: Changed to port 0xB779
Tftp: Sent ACK
Tftp: Response sent
Tftp: Init socket to port 0x0045
Tftp: TFTP server init done
Tftp: DataPort: 0xB779
Tftp: Processing packet of size 0x001E
Tftp: Set up return address
Tftp: This is block 0x426C with opcode 0x0002 and data length 0x0012
Tftp: Write request
Tftp: Init socket to port 0xB779
Tftp: Changed to port 0xB779
Tftp: Sent ACK
Tftp: Response sent
Tftp: Init socket to port 0x0045
Tftp: TFTP server init done
Tftp: DataPort: 0xB779
Tftp: Processing packet of size 0x001F
Tftp: Set up return address
Tftp: This is block 0x0000 with opcode 0x0005 and data length 0x0013
Tftp: Error
Tftp: Response sent
Tftp: Processing packet of size 0x8613
Tftp: Overflow
Tftp: Set up return address
Tftp: This is block 0x979A with opcode 0x6D2C and data length 0xBCD4
Tftp: Invalid opcode 0x0000
Tftp: Init socket to port 0xB779
Tftp: Response sent
Tftp: Init socket to port 0x0045
Tftp: TFTP server init done
Tftp: DataPort: 0xB779
any ideas?
Copied from original issue: codebndr#35
The text was updated successfully, but these errors were encountered: