Name		Name	Last commit message	Last commit date
parent directory ..
cut_stone/square		cut_stone/square
dry_cave		dry_cave
dungeon_stone		dungeon_stone
img		img
plain		plain
roof		roof
towne/square		towne/square
README.md		README.md

README.md

OpenVLex 2 Stairs and Risers

About

OpenVLex stairs and risers can be stacked and combined in endless variations.

Instructions for the new OpenVLex Plain Riser Stacking System

See separate OpenVLex Plain Riser Stacking System instructions

Instructions for textured risers and stairs

Height Variations

OpenVLex stairs and risers are available in different heights:

1/3" risers/stairs
1/2" risers/stairs
1" risers/stairs
1½" risers/stairs
platforms to be used as top for risers/stairs
"riser bases" combine a riser and the base for the next level: the compass direction in the file name describes where the locking sides are: NE means side locks north and east

Clipping Variants

For parts without holes on the bottom side (1/3" risers and platforms): print out OpenVLex glue jacks and attach (i.e. glue) them to the bottom.

Hint: Use another part of the same shape as a gluing stencil.
For parts with holes on the bottom side ("openvlex.top_and_bottom"): print out some OpenVLex double jacks ("half strong" variant recommended) and use them to clip parts together without gluing.

Printing Notes for Stairs and Risers

Material: PLA or PETG
Nozzle: 0.4 mm
Layer height: 0.10 mm or 0.15 mm
Fill Density: 10% to 15%