Replies: 3 comments 2 replies
-
|
It seems something is going on with the pins I choose. I switched them around and I will get a firmware corrupt as well when using different pins and moving the sx1280 connections. When disconnecting the miso/mosi or css pin then it goes back to radio not found. I am not sure if it helps but I am using one of the lora1280 modules that look similar to the rfm95w modules. I have a feeling I am very close as the rnode boots up it looks like and when I run an rnodeconf --info I show validated locally. |
Beta Was this translation helpful? Give feedback.
-
|
Disregard, something was up with my build environment. Spent hours debugging when I simply needed a clean start ... live and learn I guess :) |
Beta Was this translation helpful? Give feedback.
-
|
Great to hear you got it up and running! Feel free to post a picture or two of your build if you feel like it! Would be very cool to see :) |
Beta Was this translation helpful? Give feedback.
-
|
Thanks! Currently I have moved it to a soldered prototype breadboard from a solderless breadboard. Now that I have confirmed functionality I have started working on the PCB design as well and will be moving away from just using a development board and module and plan to build this from the ground up. So far I have most of the code added and have made a board definition as well |
Beta Was this translation helpful? Give feedback.
-
|
Awesome, that is looking great! Thanks for sharing it! Really looking forward to seeing what you come up with for the final design! |
Beta Was this translation helpful? Give feedback.
-
Well I am so close and I think I have done everything correctly so far??
I have compiled a custom board, set the product, model, etc and it compiles fine. Zero issues there. I have compiled it with the SX1280 modem and for the life of me cant figure this out. My OLED display works, TX LED is blinking and all. I am getting radio not found and can't get past this issue. I have double checked my pins, although the only thing I am not 100% on is DIO pin, I know on the 1276 for example this goes to DIO0 but the sx1280 does not have a DIO0 and has DIO1-3. I assumed DIO1 is the correct pin based off what I have read but I am not 100% sure. Any help would be appreciated.
Thanks!
Beta Was this translation helpful? Give feedback.
All reactions