-
Notifications
You must be signed in to change notification settings - Fork 80
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Dual Extrusion Temp Issue #28
Comments
FWIW I believe this is a Cura 3.2 bug, still present in 3.4 (the latest version I've tried). Here's why I believe so: If you post some gcode which ONLY uses tool 1, it uses a line such as "M109 S235" with no "T" number to set the temperature of extruder 1 to 235°C, so clearly they believe that reprap gcode will apply a prior T number to a M109 line which does not specify T. I discovered this while trying to use post-processing to replace "M109 S" and "M104 S" with "M10X T0", but this was not a viable solution in general. |
When the print is switching extruder the wrong temperature is set.
Ex.
T1
M109 S220
M104 T0 S175
...
M104 S230
At the end this set T1 to 220 and T0 to 230
Expected results
T1 should be set to 230 and T0 set to 175.
The code below work on my machine
T1
M109 S220
M104 T0 S175
...
M104 T1 S230
FYI. The Gcode is generating on Cura 3.2. I posted the issue there too. I'm not sure if the issue is with GPX or CuraEngine
Ultimaker/Cura#3243
The text was updated successfully, but these errors were encountered: