Skip to content

Latest commit

 

History

History
37 lines (37 loc) · 3.92 KB

changelog.md

File metadata and controls

37 lines (37 loc) · 3.92 KB
Raw
  • 11.07.2020: Added support for reversed Neopixel addressing.
  • 09.10.2020: mqttUser / mqttPassword can now be configured via webgui.
  • 16.10.2020: Added English as supported lanuage.
  • 01.11.2020: Added directive SD_NOT_MANDATORY_ENABLE: for debugging puposes SD can be bypassed at boot.
  • 17.11.2020: Introduced a distinct volume for headphone for optional headphone-PCB.
  • 20.11.2020: Added directive MEASURE_BATTERY_VOLTAGE: monitoring battery's voltage is now supported.
  • 25.11.2020: WiFi can now be enabled/disabled instantly by pressing two buttons.
  • 28.11.2020: Battery's voltage can now be visualized by Neopixel by short-press of rotary encoder's button.
  • 28.11.2020: Added directive PLAY_LAST_RFID_AFTER_REBOOT: ESPuino will recall the last RFID played after reboot.
  • 05.12.2020: Added filebrowser to webgui (thanks @mariolukas for contribution!)
  • 05.12.2020: Moved all user-relevant settings to src/settings.h
  • 06.12.2020: Added PCB for Wemos Lolin32
  • 08.12.2020: Reworked MQTT-timeout-Management
  • 09.12.2020: mDNS-feature added. If ESPuino's name is "ESPuino", you can use ESPuino.local instead it's of IP-address.
  • 11.12.2020: Revised GUI-design (thanks @mariolukas for contribution!) + (untested) PCB added for Wemos Lolin D32 + gerberfiles for headphone-PCB
  • 18.12.2020: Added SD-MMC 1 Bit-mode (SD_MMC_1BIT_MODE). This mode needs one GPIO less and provides almost doubled speed (compared to SPI) for FTP-transfers (thanks @tueddy for contribution!)
  • 18.12.2020: Added support for RFID-reader PN5180 (RFID_READER_TYPE_PN5180). PN5180 has better RFID-range/sensitivity and can read ISO-15693 / iCode SLIX2-tags aka 'Tonies' (thanks @tueddy for contribution!)
  • 20.12.2020: Due to memory-issues with webstreams, FTP needs to be activated by pressing pause+next-button now
    More to come...
  • 23.12.2020: User-config is now split into general part (settings.h) and develboard-specific part (e.g. settings-lolin32.h)
  • 13.01.2021: Added fileexlorer to webgui (thanks @grch87 for contribution!). Now files and directories can be renamed, uploaded and deleted via webgui.
  • 17.01.2021: Added directive STATIC_IP_ENABLE: (optional) static IPv4-configuration
  • 18.01.2021: Added directive PN5180_ENABLE_LPCD: awake from deepsleep with PN5180 is now possible (but needs another GPIO)
  • 25.01.2021: Added directive USE_LAST_VOLUME_AFTER_REBOOT: Remembers volume used at last shutdown after reboot. This overwrites initial volume from GUI.
  • 28.01.2021: Removed cached RFID-filebrowser and replaced by realtime-browser
  • 01.02.2021: Introducing PCB: Lolin32 with SD_MMC + PN5180
  • 06.02.2021: German umlauts now supported. When uploading via FTP make sure to change charset to CP437.
  • 09.02.2021: Added support for bluetooth-sink (a2dp). Thanks @grch87 & @elmar-ops for providing this feature!
  • 25.02.2021: Added support for dynamic button-layout. Rotary-encoder is now optional and up to five buttons can be used.
  • 25.02.2021: Actions can be freely assigned to buttons (multi-button, single-button (short), single-button (long))
  • 25.02.2021: Added support for webcontrol: basic control (volume, play/pause, next, previous, first, last track) can now be controlled via webgui.
  • 25.02.2021: Added support for .m4a and .wav-files.
  • 26.02.2021: Shutdown via webgui is now available.
  • 05.03.2021: Added support for remote control via infrared. Make sure to enable IR_CONTROL_ENABLE to use this feature and don't forget to assign corresponding rc-commands of your remote control to actions.
  • 19.03.2021: Added support for port-expander PCA9555. Can be used for everything, that is "button-like": buttons, headphone-detect, PN5180.IRQ.
  • 28.03.2021: Added support for fileseek. With commands CMD_SEEK_FORWARDS and CMD_SEEK_BACKWARDS it's possible to jump a number of seconds defined in jumpOffset.
  • 30.03.2021: Added support for stereo/mono via PLAY_MONO_SPEAKER. If active, mono is used while headphones remain stereo (if HEADPHONE_ADJUST_ENABLE is active).