[Bug]: T-Deck: Can not stop the alert message sound

[tomhanax]

Category

Other

Hardware

T-Deck

Firmware Version

2.5.10.8462d65f

Description

I use Ext Notif module to hear alert message, with these settings:

• Alert Message Buzzer
• Use I²S Pin as Buzzer
• Nag Timeout = 60

It used to work OK with previous firmware (some 2.3.x). Now it works only partially - it starts the sound but I can not stop it, I have to wait for the timeout (60 seconds). Also, sometimes, whole device freeze or restarts (maybe related to #5150).

If it is any help, I am able to try some code changes and upload, so if anybody has an idea what to try, feel free to navigate me.

Relevant log output

No response

[zpatten]

Same issue here on 2.5.8.6485f03. Can't cancel the notify buzzer. Also, it locks up often if wifi is enabled. With wifi off it will only lock up when a message is received; it seems to lock up as soon as the buzzer is done playing.

[caveman99]

This is a known issue because the trackball re-uses some GPIOs on the t-deck. We're looking into several solutions.

[zpatten]

Just to add a note and possible workaround for others that find this; as long as wifi is off and the buzzer (ext notif) is disabled I don't seem to be having random lockups or lockups after receiving messages.

[gjelsoe]

Perhaps #5375 fixes this issue ?

[tomhanax]

Perhaps #5375 fixes this issue ?
Yes, it seems so. Now I can cancel the sound by clicking the trackball. Thanks!