$ decode -help
Usage of decode:
-bytes
print message as bytes
-config
print decoded configuration
-diff
print difference from previous
-help
print usage
-irin string
LIRC source (file or device) (default "/dev/lirc-rx")
-log-level string
log level [debug|info|warn|error] (default "debug")
-msg
print message
-rec-clean
receive option: print cleaned up pulse data
-rec-dev
receive option: reading from LIRC device (default true)
-rec-raw
receive option: print raw pulse data
$ paninv_rc -help
Usage of paninv_rc:
-db string
SQLite database (default "/home/mhy/paninv/paninv.db")
-fan string
fan speed (set per mode, overridden if powerful or quiet is enabled) [auto|lowest|low|middle|high|highest]
-help
print usage
-horiz string
vent horizontal position [auto|farleft|left|middle|right|farright]
-irout string
LIRC output device or file (default "/dev/lirc-tx")
-log-level string
log level [debug|info|warn|error] (default "warn")
-mode string
mode [auto|heat|cool|dry]
-power string
power [on|off]
-powerful string
powerful [on|off]
-prio int
The priority, or niceness, of the process (-20..19) (default -10)
-quiet string
quiet [on|off]
-send-dev
send option: writing to a LIRC device (default true)
-send-int int
send option: number of milliseconds between transmissions (default 20)
-send-mode2
send option: output in mode2 format (when writing to file for sending with ir-ctl)
-send-tx int
send option: number of times to send the message (default 1)
-show
show the current configuration
-temp string
temperature (set per mode)
-toff string
timer_off [on|off]
-tofft string
timer_off time, e.g. 21:00
-ton string
timer_on [on|off]
-tont string
timer_on time, e.g. 09:00
-verbose
print verbose output
-vert string
vent vertical position [auto|lowest|low|middle|high|highest]
$ paninv_controller -help
-bytes
print message as bytes
-config
print decoded configuration
-db string
SQLite database (default "/home/mhy/paninv/paninv.db")
-help
print usage
-irin string
LIRC receive device (default "/dev/lirc-rx")
-irout string
LIRC transmit device (default "/dev/lirc-tx")
-load-jobs string
load cronjobs from file
-log-level string
log level [debug|info|warn|error] (default "info")
-msg
print message
-rec-clean
receive option: print cleaned up pulse data
-rec-raw
receive option: print raw pulse data
-send-dev
send option: writing to a LIRC device (default true)
-send-int int
send option: number of milliseconds between transmissions (default 20)
-send-mode2
send option: output in mode2 format (when writing to file for sending with ir-ctl)
-send-tx int
send option: number of times to send the message (default 1)
Using icons from Icons8.