Import STM32CubeWB v1.23.0 on 23-Sept-2025.

From https://github.com/STMicroelectronics/STM32CubeWB.git tag v1.23.0

Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>

Author: pi-anl

CMSIS/STM32WBxx/Include/stm32wb10xx.h

@@ -16,13 +16,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019-2021 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -39,7 +38,7 @@
 #define __STM32WBxx_H
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif /* __cplusplus */
 
 /** @addtogroup Library_configuration_section
@@ -58,19 +57,19 @@
   */
 #if !defined  (USE_HAL_DRIVER)
 /**
- * @brief Comment the line below if you will not use the peripherals drivers.
+  * @brief Comment the line below if you will not use the peripherals drivers.
    In this case, these drivers will not be included and the application code will
    be based on direct access to peripherals registers
    */
-  /*#define USE_HAL_DRIVER */
+/*#define USE_HAL_DRIVER */
 #endif /* USE_HAL_DRIVER */
 
 /**
   * @brief CMSIS Device version number
   */
 #define __STM32WBxx_CMSIS_VERSION_MAIN   (0x01U) /*!< [31:24] main version */
-#define __STM32WBxx_CMSIS_VERSION_SUB1   (0x07U) /*!< [23:16] sub1 version */
-#define __STM32WBxx_CMSIS_VERSION_SUB2   (0x00U) /*!< [15:8]  sub2 version */
+#define __STM32WBxx_CMSIS_VERSION_SUB1   (0x0CU) /*!< [23:16] sub1 version */
+#define __STM32WBxx_CMSIS_VERSION_SUB2   (0x03U) /*!< [15:8]  sub2 version */
 #define __STM32WBxx_CMSIS_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */
 #define __STM32WBxx_CMSIS_DEVICE_VERSION        ((__STM32WBxx_CMSIS_VERSION_MAIN << 24)\
                                                 |(__STM32WBxx_CMSIS_VERSION_SUB1 << 16)\
@@ -86,17 +85,23 @@
   */
 
 #if defined(STM32WB55xx)
-  #include "stm32wb55xx.h"
+#include "stm32wb55xx.h"
 #elif defined(STM32WB5Mxx)
-  #include "stm32wb5mxx.h"
+#include "stm32wb5mxx.h"
 #elif defined(STM32WB50xx)
-  #include "stm32wb50xx.h"
+#include "stm32wb50xx.h"
 #elif defined(STM32WB35xx)
-  #include "stm32wb35xx.h"
+#include "stm32wb35xx.h"
 #elif defined(STM32WB30xx)
-  #include "stm32wb30xx.h"
+#include "stm32wb30xx.h"
+#elif defined(STM32WB15xx)
+#include "stm32wb15xx.h"
+#elif defined(STM32WB10xx)
+#include "stm32wb10xx.h"
+#elif defined(STM32WB1Mxx)
+#include "stm32wb1mxx.h"
 #else
- #error "Please select first the target STM32WBxx device used in your application, for instance xxx (in stm32wbxx.h file)"
+#error "Please select first the target STM32WBxx device used in your application, for instance xxx (in stm32wbxx.h file)"
 #endif
 /**
   * @}
@@ -146,13 +151,69 @@ typedef enum
 
 #define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
 
+/* Use of CMSIS compiler intrinsics for register exclusive access */
+/* Atomic 32-bit register access macro to set one or several bits */
+#define ATOMIC_SET_BIT(REG, BIT)                             \
+  do {                                                       \
+    uint32_t val;                                            \
+    do {                                                     \
+      val = __LDREXW((__IO uint32_t *)&(REG)) | (BIT);       \
+    } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
+  } while(0)
+
+/* Atomic 32-bit register access macro to clear one or several bits */
+#define ATOMIC_CLEAR_BIT(REG, BIT)                           \
+  do {                                                       \
+    uint32_t val;                                            \
+    do {                                                     \
+      val = __LDREXW((__IO uint32_t *)&(REG)) & ~(BIT);      \
+    } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
+  } while(0)
+
+/* Atomic 32-bit register access macro to clear and set one or several bits */
+#define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK)                          \
+  do {                                                                     \
+    uint32_t val;                                                          \
+    do {                                                                   \
+      val = (__LDREXW((__IO uint32_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
+    } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U);               \
+  } while(0)
+
+/* Atomic 16-bit register access macro to set one or several bits */
+#define ATOMIC_SETH_BIT(REG, BIT)                            \
+  do {                                                       \
+    uint16_t val;                                            \
+    do {                                                     \
+      val = __LDREXH((__IO uint16_t *)&(REG)) | (BIT);       \
+    } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
+  } while(0)
+
+/* Atomic 16-bit register access macro to clear one or several bits */
+#define ATOMIC_CLEARH_BIT(REG, BIT)                          \
+  do {                                                       \
+    uint16_t val;                                            \
+    do {                                                     \
+      val = __LDREXH((__IO uint16_t *)&(REG)) & ~(BIT);      \
+    } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
+  } while(0)
+
+/* Atomic 16-bit register access macro to clear and set one or several bits */
+#define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK)                         \
+  do {                                                                     \
+    uint16_t val;                                                          \
+    do {                                                                   \
+      val = (__LDREXH((__IO uint16_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
+    } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U);               \
+  } while(0)
+
 #define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL)))
+
 /**
   * @}
   */
 
 #if defined (USE_HAL_DRIVER)
- #include "stm32wbxx_hal.h"
+#include "stm32wbxx_hal.h"
 #endif /* USE_HAL_DRIVER */
 
 #ifdef __cplusplus
@@ -167,8 +228,3 @@ typedef enum
 /**
   * @}
   */
-
-
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

CMSIS/STM32WBxx/Include/stm32wb15xx.h

@@ -6,13 +6,12 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2019-2021 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
@@ -32,7 +31,7 @@
 #define __SYSTEM_STM32WBXX_H
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif
 
 #include <stdint.h>
@@ -49,22 +48,22 @@
 /** @addtogroup STM32WBxx_System_Exported_types
   * @{
   */
-  /* The SystemCoreClock variable is updated in three ways:
-      1) by calling CMSIS function SystemCoreClockUpdate()
-      2) by calling HAL API function HAL_RCC_GetSysClockFreq()
-      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
-         Note: If you use this function to configure the system clock; then there
-               is no need to call the 2 first functions listed above, since SystemCoreClock
-               variable is updated automatically.
-  */
+/* The SystemCoreClock variable is updated in three ways:
+    1) by calling CMSIS function SystemCoreClockUpdate()
+    2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+    3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+       Note: If you use this function to configure the system clock; then there
+             is no need to call the 2 first functions listed above, since SystemCoreClock
+             variable is updated automatically.
+*/
 
 extern uint32_t SystemCoreClock;            /*!< System Clock Frequency */
 
 extern const uint32_t AHBPrescTable[16];    /*!< AHB prescalers table values */
 extern const uint32_t APBPrescTable[8];     /*!< APB prescalers table values */
 extern const uint32_t MSIRangeTable[16];    /*!< MSI ranges table values     */
 
-#if defined(STM32WB55xx) || defined(STM32WB5Mxx) || defined(STM32WB35xx)
+#if defined(STM32WB55xx) || defined(STM32WB5Mxx) || defined(STM32WB35xx) || defined (STM32WB15xx) || defined (STM32WB1Mxx)
 extern const uint32_t SmpsPrescalerTable[4][6];  /*!< SMPS factor ranges table values     */
 #endif
 /**
@@ -110,4 +109,3 @@ extern void SystemCoreClockUpdate(void);
 /**
   * @}
   */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/