frugal-iot.ino

/* 
 *  This is a test harness for the Frugal IoT project
 */

#include "_settings.h"  // Settings for what to include etc

#include "_base.h" // Base for new class version
#include "sensor.h" // Base class for sensors

#ifdef SYSTEM_WIFI_WANT
#include "system_wifi.h"
#endif
#ifdef SYSTEM_MQTT_WANT
#include "system_mqtt.h"
#endif
//TO_ADD_ACTUATOR - follow the pattern below and add any variables and search for other places tagged TO_ADD_ACTUATOR
#ifdef ACTUATOR_LEDBUILTIN_WANT
#include "actuator_ledbuiltin.h"
#endif
#ifdef ACTUATOR_RELAY_WANT
#include "actuator_relay.h"
#endif

// Follow the pattern below and add any variables and search for other places tagged TO_ADD_SENSOR
#ifdef SENSOR_ANALOG_EXAMPLE_WANT
#include "sensor_analog_example.h"
#endif
#ifdef SENSOR_SOIL_WANT
#include "sensor_soil.h"
#endif
#ifdef SENSOR_BATTERY_WANT
#include "sensor_battery.h"
#endif
#ifdef SENSOR_SHT_WANT
#include "sensor_sht.h"
#endif
#ifdef SENSOR_DHT_WANT
#include "sensor_dht.h"
#endif
#ifdef CONTROL_BLINKEN_WANT
#include "control_blinken.h"
#endif
#ifdef CONTROL_DEMO_MQTT_WANT
#include "control_demo_mqtt.h"
#endif
#ifdef SYSTEM_DISCOVERY_WANT
#include "system_discovery.h"
#endif

void setup() {
#ifdef ANY_DEBUG
  Serial.begin(SERIAL_BAUD);
  while (!Serial) { 
    ; // wait for serial port to connect. Needed for Arduino Leonardo only
  }
  delay(SERIAL_DELAY); // If dont do this on D1 Mini and Arduino IDE then miss next debugging
  //Serial.setDebugOutput(true);  // Enable debug from wifi, also needed to enable output from printf
  Serial.println(F("FrugalIoT Starting"));
#endif // ANY_DEBUG
// put setup code here, to run once:
xWifi::setup();
Mqtt = new MqttManager();
xDiscovery::setup(); // Must be after system mqtt and before ACTUATOR* or SENSOR* or CONTROL* that setup topics

//TO_ADD_ACTUATOR - follow the pattern below and add any variables and search for other places tagged TO_ADD_ACTUATOR
#ifdef ACTUATOR_LEDBUILTIN_WANT
Actuator_Ledbuiltin* a1 = new Actuator_Ledbuiltin(ACTUATOR_LEDBUILTIN_PIN, "ledbuiltin");
#endif
#ifdef ACTUATOR_RELAY_WANT
Actuator_Digital* a2 = new Actuator_Digital(ACTUATOR_RELAY_PIN, "relay");
#endif

// TODO_C++_EXPERT weird I have to assign to a vaiable even though constructor sticks in the "sensors" vector, else compiler complains, 
// but if I assign then it complaisn the variable isn't used.  And the pragma's seem to get ignored in the .ino file 
//TODO-25 try adding these to a Sensor* Vector here instead of in constructor
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-parameter"
#ifdef SENSOR_ANALOG_EXAMPLE_WANT
  Sensor_Analog* s3 = new Sensor_Analog(SENSOR_ANALOG_EXAMPLE_PIN, SENSOR_ANALOG_EXAMPLE_SMOOTH, SENSOR_ANALOG_EXAMPLE_TOPIC, SENSOR_ANALOG_EXAMPLE_MS);
#endif
#ifdef SENSOR_BATTERY_WANT
  Sensor_Battery* s4 = new Sensor_Battery(SENSOR_BATTERY_PIN);  // TODO-57 will rarely be as simple as this
#endif
#ifdef SENSOR_SHT_WANT
  Sensor_SHT* s1 = new Sensor_SHT(SENSOR_SHT_ADDRESS, &Wire, "temperature", "humidity", SENSOR_SHT_MS);
#endif
#ifdef SENSOR_DHT_WANT
  Sensor_DHT* s2 = new Sensor_DHT(SENSOR_DHT_PIN, "temperature", "humidity", SENSOR_DHT_MS);
#endif
#ifdef SENSOR_SOIL_WANT
  Sensor_Soil* s5 = new Sensor_Soil(SENSOR_SOIL_0, SENSOR_SOIL_100, SENSOR_SOIL_PIN, 0, SENSOR_SOIL_TOPIC, SENSOR_SOIL_MS);
#endif
#pragma GCC diagnostic pop

Frugal_Base::setupAll(); // Will replace all setups as developed - currently doing sensors and actuators

#ifdef CONTROL_BLINKEN_WANT
  cBlinken::setup();
#endif
#ifdef CONTROL_DEMO_MQTT_WANT
  cDemoMqtt::setup(); // Must be after system_mqtt
#endif

#ifdef ANY_DEBUG
  Serial.println(F("FrugalIoT Starting Loop"));
#endif // ANY_DEBUG

}

void loop() {
  Mqtt->loop();
  Frugal_Base::loopAll(); // Will replace all loops as developed - but starting with sensors, so positioned here.


  #ifdef CONTROL_BLINKEN_WANT
    cBlinken::loop();
  #endif
  #ifdef SYSTEM_DISCOVERY_WANT
    xDiscovery::loop();
  #endif
}