Numark Mixtrack Pro Ii
The Numark Mixtrack Pro II is the successor of Numark Mixtrack Pro and features the same hardware with some minor design changes.
The audio interface is recognized in Ubuntu 14.04 out of the box.
There is a pending PR to integrate this mapping into Mixxx 2.1. This mapping is based on this mapping.
Rotate the knob to cycle through folders and tracks.
Press: Same as Back button.
Press one of these buttons while a track is selected to assign it to Deck 1 or 2, respectively, in the software.
Cycles between the file structure and the music library in the software.
Allows multiple control commands to be triggered when pressed and held first along with other buttons.
Starts and suspends playback.
Shift + Play/Pause: Activates soft start effect if paused or
brake effect if playing.
Sends pre-fader audio to the Cue Channel for headphone monitoring.
Behavior depends on the cue
mode
set in the Mixxx preferences.
Shift + Cue: return the play head to the start of the track.
This capacitive, touch-sensitive jog wheel controls the audio when the wheel is touched and moved. When the Scratch button is not active, use the wheel to bend the pitch of the track. When the Scratch button is active, use the wheel to grab and move the audio, "scratching" the track as you would with a vinyl record. You can also grab the non-touch-sensitive outer wheel to bend the pitch of the track.
Controls the behavior of the platters. When not active, the platter will function as Pitch Bend. When active, the platter will have the ability to scratch.
Controls the tempo (speed) of the individual decks.
Press and hold to momentarily reduce the speed of the track.
Press and hold to momentarily increase the speed of the track.
Enables BPM syncing between decks.
Adjusts effect metaknobs.
Shift + Effect Control: Selects effect.
Adjusts the Dry/Wet mix of the deck's EffectUnit.
Shift + Beats: Adjust the deck's QuickEffect.
Function of this button depends on the current Pad Mode.
Shift + Loop In: Sets the current Pad Mode to "Loop Mode".
Loop Mode: Press this pad to set the beginning of a loop.
Sample Mode: Plays the sample assigned to Sampler 1 (left deck) or
Sampler 5 (right deck).
Cue Mode: If Hotcue 1 has not already been set for the loaded track,
this control will set Hotcue 1 at current position in the track. If
Hotcue 1 has already been set, this control will jump to Hotcue 1.
Function of this button depends on the current Pad Mode.
Shift + Loop Out: Sets the current pad mode to “Sample Mode".
Loop Mode: Press this pad to set the end of a loop.
Sample Mode: Plays the sample assigned to Sampler 2 (left deck) or
Sampler 6 (right deck).
Cue Mode: If Hotcue 2 has not already been set for the loaded track,
this control will set Hotcue 2 at current position in the track. If
Hotcue 2 has already been set, this control will jump to Hotcue 2.
Function of this button depends on the current Pad Mode.
Shift + Reloop: Sets the current pad mode to "Cue Mode".
Loop Mode: Press this pad when inside a loop to turn the loop off.
When this button is pressed again outside a loop, this will activate the
loop and start playback from its Loop In point.
Sample Mode: Plays the sample assigned to Sampler 3 (left deck) or
Sampler 7 (right deck).
Cue Mode: If Hotcue 3 has not already been set for the loaded track,
this control will set Hotcue 3 at current position in the track. If
Hotcue 3 has already been set, this control will jump to Hotcue 3.
Function of this button depends on the current Pad Mode.
Loop Mode: Press this pad to cut the length of currently playing
loop to half.
Shift + Loop x1/2 when in Loop Mode: Press this pad to double the
length of the currently playing loop.
Sample Mode: Plays the sample assigned to Sampler 4 (left deck) or
Sampler 8 (right deck).
Cue Mode: Toggles Hotcue Delete Mode. Press this button, and then
press one of the other pads in the row to delete that Hotcue.
Turns FX 1 on and off per deck.
Shift + FX 1: Sets and starts playback of a 1-beat autoloop.
Turns FX 2 on and off per deck.
Shift + FX 2: Sets and starts playback of a 2-beat autoloop.
Turns FX 3 on and off per deck.
Shift + FX 3: Sets and starts playback of a 4-beat autoloop.
Allows manual entry of song's BPM by repeated pressing along the beats
of the track.
Shift + Tap: Sets and starts playback of a 16-beat autoloop.
Note: This button will blink at each detected beat in the track.
Adjusts the volume of the individual channels in the software.
Adjusts the volume of the master mix coming from the software.
Note: This does not affect the microphone volume. Use the Mic Gain
knob to control the microphone volume.
Controls the blend between the two decks.
Controls the treble frequencies for the individual channels.
Controls the mid range frequencies for the individual channels.
Controls the bass frequencies for the individual channels.
Adjusts the volume for headphone cueing in the software.
Adjusts the software’s audio output to the headphones, mixing between the cue output and the master mix output.
Press this button while the music is playing to jump back to the last set cue point, creating a "stutter" effect.
This is the Mixxx Wiki - 
Mixxx is a free and open-source DJ software.
Manual
Hardware Compatibility
Reporting Bugs
Getting Involved
Contribution Guidelines
Coding Guidelines
Using Git
Developer Guide
Creating Skins
Contributing Mappings
Mixxx Controls
MIDI Scripting
Components JS
HID Scripting