When adding datasets to root dir #30
Comments
|
I'm using the QUME V7 |
|
I figured it out. I just copied all the subfolders of tz_datasets to the root dir. It does work. |
|
Hi, |
|
Hi..Im getting this error when Im running (qemu) c Freeing initrd memory: 655076K |
Hi Mofan,
I met a strange issue when adding the datasets to root dir.
I followed your instruction and the darknetz and datasets to the corresponding folder. It shows the following errors.
When I removed the datasets from the root folder. It works but only prompts "cannot find datasets".
Thanks for your time.
========
Starting kernel ...
Booting Linux on physical CPU 0x0
Linux version 5.14.0 (daisylab3@daisylab3-Precision-7920-Tower) (arm-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) 10.2.1 20201103, GNU ld (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) 2.35.1.20201028) #1 SMP Mon Oct 4 16:01:45 EDT 2021
CPU: ARMv7 Processor [412fc0f1] revision 1 (ARMv7), cr=10c5387d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
OF: fdt: Machine model: linux,dummy-virt
OF: fdt: Ignoring memory block 0xe000000 - 0xf000000
Memory policy: Data cache writealloc
cma: Reserved 16 MiB at 0x81000000
Zone ranges:
Normal [mem 0x0000000040000000-0x00000000820fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000040000000-0x000000007fdfffff]
node 0: [mem 0x000000007fe00000-0x000000007fffffff]
node 0: [mem 0x0000000080000000-0x00000000820fffff]
Initmem setup node 0 [mem 0x0000000040000000-0x00000000820fffff]
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: SMC Calling Convention v1.0
percpu: Embedded 19 pages/cpu s46476 r8192 d23156 u77824
Built 1 zonelists, mobility grouping on. Total pages: 268478
Kernel command line: console=ttyAMA0,115200 earlyprintk=serial,ttyAMA0,115200
Unknown command line parameters: earlyprintk=serial,ttyAMA0,115200
Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes, linear)
Inode-cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 710748K/1082368K available (8192K kernel code, 593K rwdata, 1760K rodata, 1024K init, 151K bss, 355236K reserved, 16384K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
trace event string verifier disabled
rcu: Hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
random: get_random_bytes called from start_kernel+0x518/0x6c0 with crng_init=0
arch_timer: cp15 timer(s) running at 62.50MHz (virt).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns
Switching to timer-based delay loop, resolution 16ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
Mountpoint-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
CPU: Testing write buffer coherency: ok
CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
/cpus/cpu@0 missing clock-frequency property
/cpus/cpu@1 missing clock-frequency property
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x40100000 - 0x40100060
rcu: Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
smp: Brought up 1 node, 2 CPUs
SMP: Total of 2 processors activated (250.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 512 (order: 3, 32768 bytes, linear)
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor ladder
hw-breakpoint: CPU 0 debug is powered down!
Serial: AMBA PL011 UART driver
9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 62, base_baud = 0) is a PL011 rev1
printk: console [ttyAMA0] enabled
wait_for_initramfs() called before rootfs_initcalls
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arch_sys_counter
NET: Registered PF_INET protocol family
IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 1024 (order: 1, 12288 bytes, linear)
TCP established hash table entries: 16384 (order: 4, 65536 bytes, linear)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes, linear)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
workingset: timestamp_bits=30 max_order=18 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
9p: Installing v9fs 9p2000 file system support
io scheduler mq-deadline registered
io scheduler kyber registered
physmap-flash 4000000.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff]
4000000.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
Initramfs unpacking failed: write error
Freeing initrd memory: 330896K
libphy: Fixed MDIO Bus: probed
usbcore: registered new interface driver usb-storage
rtc-pl031 9010000.pl031: registered as rtc0
rtc-pl031 9010000.pl031: setting system clock to 2021-10-05T14:37:04 UTC (1633444624)
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
optee: probing for conduit method.
optee: revision 3.14 (0ef6b144)
optee: dynamic shared memory is enabled
optee: initialized driver
NET: Registered PF_PACKET protocol family
9pnet: Installing 9P2000 support
Registering SWP/SWPB emulation handler
ALSA device list:
No soundcards found.
Freeing unused kernel image (initmem) memory: 1024K
Run /init as init process
/init: exec: line 15: /sbin/init: not found
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00
CPU: 1 PID: 1 Comm: init Not tainted 5.14.0 #1
Hardware name: Generic DT based system
[<8010f3a4>] (unwind_backtrace) from [<8010b14c>] (show_stack+0x10/0x14)
[<8010b14c>] (show_stack) from [<80839a48>] (dump_stack_lvl+0x40/0x4c)
[<80839a48>] (dump_stack_lvl) from [<80835a94>] (panic+0x104/0x304)
[<80835a94>] (panic) from [<80124edc>] (do_exit+0x954/0x9d0)
[<80124edc>] (do_exit) from [<80125f9c>] (do_group_exit+0x3c/0xb8)
[<80125f9c>] (do_group_exit) from [<80126028>] (__wake_up_parent+0x0/0x18)
CPU0: stopping
CPU: 0 PID: 10 Comm: rcu_sched Not tainted 5.14.0 #1
Hardware name: Generic DT based system
[<8010f3a4>] (unwind_backtrace) from [<8010b14c>] (show_stack+0x10/0x14)
[<8010b14c>] (show_stack) from [<80839a48>] (dump_stack_lvl+0x40/0x4c)
[<80839a48>] (dump_stack_lvl) from [<8010d924>] (do_handle_IPI+0x2d4/0x308)
[<8010d924>] (do_handle_IPI) from [<8010d970>] (ipi_handler+0x18/0x20)
[<8010d970>] (ipi_handler) from [<80179b6c>] (handle_percpu_devid_irq+0x8c/0x21c)
[<80179b6c>] (handle_percpu_devid_irq) from [<80173aec>] (handle_domain_irq+0x5c/0x78)
[<80173aec>] (handle_domain_irq) from [<804d40b8>] (gic_handle_irq+0x7c/0x90)
[<804d40b8>] (gic_handle_irq) from [<80100b4c>] (__irq_svc+0x6c/0x90)
Exception stack(0x81115e08 to 0x81115e50)
5e00: 80c07c00 00000000 80ca1e30 00000882 c20cdac0 00000000
5e20: 80b5dac0 00000000 80c07c00 41570000 00000000 81115e94 80c00044 81115e58
5e40: 80840384 8014df54 60000113 ffffffff
[<80100b4c>] (__irq_svc) from [<8014df54>] (finish_task_switch+0xd8/0x254)
[<8014df54>] (finish_task_switch) from [<80840384>] (__schedule+0x278/0x6d0)
[<80840384>] (__schedule) from [<8084083c>] (schedule+0x60/0xdc)
[<8084083c>] (schedule) from [<808459c4>] (schedule_timeout+0x9c/0x178)
[<808459c4>] (schedule_timeout) from [<8018b22c>] (rcu_gp_kthread+0x614/0xba8)
[<8018b22c>] (rcu_gp_kthread) from [<80144d4c>] (kthread+0x148/0x164)
[<80144d4c>] (kthread) from [<80100150>] (ret_from_fork+0x14/0x24)
Exception stack(0x81115fb0 to 0x81115ff8)
5fa0: 00000000 00000000 00000000 00000000
5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00 ]---
The text was updated successfully, but these errors were encountered: