nzbToSickBeard.py

#!/usr/bin/env python
#
##############################################################################
### NZBGET POST-PROCESSING SCRIPT                                          ###

# Post-Process to SickBeard.
#
# This script sends the download to your automated media management servers.
#
# NOTE: This script requires Python to be installed on your system.

##############################################################################
### OPTIONS                                                                ###

## SickBeard

# SickBeard script category.
#
# category that gets called for post-processing with SickBeard.
#sbCategory=tv

# SickBeard host.
#sbhost=localhost

# SickBeard port.
#sbport=8081

# SickBeard username.
#sbusername= 

# SickBeard password.
#sbpassword=

# SickBeard uses ssl (0, 1).
#
# Set to 1 if using ssl, else set to 0.
#sbssl=0

# SickBeard web_root
#
# set this if using a reverse proxy.
#sbweb_root=

# SickBeard delay
#
# Set the number of seconds to wait before calling post-process in SickBeard.
#sbdelay=0

# SickBeard wait_for
#
# Set the number of minutes to wait before timing out. If transfering files across drives or network, increase this to longer than the time it takes to copy an episode.
#sbwait_for=5

# SickBeard watch directory.
#
# set this if SickBeard and nzbGet are on different systems.
#sbwatch_dir=

# SickBeard fork.
#
# set to default or TPB or failed if using the custom "TPB" or "failed fork".
#sbfork=default

# SickBeard Delete Failed Downloads (0, 1).
#
# set to 1 to delete failed, or 0 to leave files in place.
#sbdelete_failed=0

## Extensions

# Media Extensions
#
# This is a list of media extensions that may be transcoded if transcoder is enabled below.
#mediaExtensions=.mkv,.avi,.divx,.xvid,.mov,.wmv,.mp4,.mpg,.mpeg,.vob,.iso

## Transcoder

# Transcode (0, 1).
#
# set to 1 to transcode, otherwise set to 0.
#transcode=0

# create a duplicate, or replace the original (0, 1).
#
# set to 1 to cretae a new file or 0 to replace the original
#duplicate=1

# ignore extensions
#
# list of extensions that won't be transcoded. 
#ignoreExtensions=.avi,.mkv

# ffmpeg output settings.
#outputVideoExtension=.mp4
#outputVideoCodec=libx264
#outputVideoPreset=medium
#outputVideoFramerate=24
#outputVideoBitrate=800k
#outputAudioCodec=libmp3lame
#outputAudioBitrate=128k
#outputSubtitleCodec=

## WakeOnLan

# use WOL (0, 1).
#
# set to 1 to send WOL broadcast to the mac and test the server (e.g. xbmc) on the host and port specified.
#wolwake=0

# WOL MAC
#
# enter the mac address of the system to be woken.
#wolmac=00:01:2e:2D:64:e1

# Set the Host and Port of a server to verify system has woken.
#wolhost=192.168.1.37
#wolport=80

### NZBGET POST-PROCESSING SCRIPT                                          ###
##############################################################################

import os
import sys
import logging

import autoProcess.migratecfg as migratecfg
import autoProcess.autoProcessTV as autoProcessTV
from autoProcess.nzbToMediaEnv import *
from autoProcess.nzbToMediaUtil import *

#check to migrate old cfg before trying to load.
if os.path.isfile(os.path.join(os.path.dirname(sys.argv[0]), "autoProcessMedia.cfg.sample")):
    migratecfg.migrate()
# check to write settings from nzbGet UI to autoProcessMedia.cfg.
if os.environ.has_key('NZBOP_SCRIPTDIR'):
    migratecfg.addnzbget()

nzbtomedia_configure_logging(os.path.dirname(sys.argv[0]))
Logger = logging.getLogger(__name__)

Logger.info("====================") # Seperate old from new log
Logger.info("nzbToSickBeard %s", VERSION)

WakeUp()

# NZBGet V11+
# Check if the script is called from nzbget 11.0 or later
if os.environ.has_key('NZBOP_SCRIPTDIR') and not os.environ['NZBOP_VERSION'][0:5] < '11.0':
    Logger.info("MAIN: Script triggered from NZBGet (11.0 or later).")

    # NZBGet argv: all passed as environment variables.
    # Exit codes used by NZBGet
    POSTPROCESS_PARCHECK=92
    POSTPROCESS_SUCCESS=93
    POSTPROCESS_ERROR=94
    POSTPROCESS_NONE=95

    # Check nzbget.conf options
    status = 0

    if os.environ['NZBOP_UNPACK'] != 'yes':
        Logger.error("MAIN: Please enable option \"Unpack\" in nzbget configuration file, exiting")
        sys.exit(POSTPROCESS_ERROR)

    # Check par status
    if os.environ['NZBPP_PARSTATUS'] == '3':
        Logger.warning("MAIN: Par-check successful, but Par-repair disabled, exiting")
        Logger.info("MAIN: Please check your Par-repair settings for future downloads.")
        sys.exit(POSTPROCESS_NONE)

    if os.environ['NZBPP_PARSTATUS'] == '1' or os.environ['NZBPP_PARSTATUS'] == '4':
        Logger.warning("MAIN: Par-repair failed, setting status \"failed\"")
        status = 1

    # Check unpack status
    if os.environ['NZBPP_UNPACKSTATUS'] == '1':
        Logger.warning("MAIN: Unpack failed, setting status \"failed\"")
        status = 1

    if os.environ['NZBPP_UNPACKSTATUS'] == '0' and os.environ['NZBPP_PARSTATUS'] == '0':
        # Unpack was skipped due to nzb-file properties or due to errors during par-check

        if os.environ['NZBPP_HEALTH'] < 1000:
            Logger.warning("MAIN: Download health is compromised and Par-check/repair disabled or no .par2 files found. Setting status \"failed\"")
            Logger.info("MAIN: Please check your Par-check/repair settings for future downloads.")
            status = 1

        else:
            Logger.info("MAIN: Par-check/repair disabled or no .par2 files found, and Unpack not required. Health is ok so handle as though download successful")
            Logger.info("MAIN: Please check your Par-check/repair settings for future downloads.")

    # Check if destination directory exists (important for reprocessing of history items)
    if not os.path.isdir(os.environ['NZBPP_DIRECTORY']):
        Logger.error("MAIN: Nothing to post-process: destination directory %s doesn't exist. Setting status \"failed\"", os.environ['NZBPP_DIRECTORY'])
        status = 1

    # All checks done, now launching the script.
    Logger.info("MAIN: Script triggered from NZBGet, starting autoProcessTV...")
    clientAgent = "nzbget"
    result = autoProcessTV.processEpisode(os.environ['NZBPP_DIRECTORY'], os.environ['NZBPP_NZBFILENAME'], status, clientAgent, os.environ['NZBPP_CATEGORY'])
# SABnzbd Pre 0.7.17
elif len(sys.argv) == SABNZB_NO_OF_ARGUMENTS:
    # SABnzbd argv:
    # 1 The final directory of the job (full path)
    # 2 The original name of the NZB file
    # 3 Clean version of the job name (no path info and ".nzb" removed)
    # 4 Indexer's report number (if supported)
    # 5 User-defined category
    # 6 Group that the NZB was posted in e.g. alt.binaries.x
    # 7 Status of post processing. 0 = OK, 1=failed verification, 2=failed unpack, 3=1+2
    Logger.info("MAIN: Script triggered from SABnzbd, starting autoProcessTV...")
    clientAgent = "sabnzbd"
    result = autoProcessTV.processEpisode(sys.argv[1], sys.argv[2], sys.argv[7], clientAgent, sys.argv[5])
# SABnzbd 0.7.17+
elif len(sys.argv) >= SABNZB_0717_NO_OF_ARGUMENTS:
    # SABnzbd argv:
    # 1 The final directory of the job (full path)
    # 2 The original name of the NZB file
    # 3 Clean version of the job name (no path info and ".nzb" removed)
    # 4 Indexer's report number (if supported)
    # 5 User-defined category
    # 6 Group that the NZB was posted in e.g. alt.binaries.x
    # 7 Status of post processing. 0 = OK, 1=failed verification, 2=failed unpack, 3=1+2
    # 8 Failure URL
    Logger.info("MAIN: Script triggered from SABnzbd 0.7.17+, starting autoProcessTV...")
    clientAgent = "sabnzbd"
    result = autoProcessTV.processEpisode(sys.argv[1], sys.argv[2], sys.argv[7], clientAgent, sys.argv[5])
else:
    Logger.debug("MAIN: Invalid number of arguments received from client.")
    Logger.info("MAIN: Running autoProcessTV as a manual run...")
    result = autoProcessTV.processEpisode('Manual Run', 'Manual Run', 0)

if result == 0:
    Logger.info("MAIN: The autoProcessTV script completed successfully.")
    if os.environ.has_key('NZBOP_SCRIPTDIR'): # return code for nzbget v11
        sys.exit(POSTPROCESS_SUCCESS)
else:
    Logger.info("MAIN: A problem was reported in the autoProcessTV script.")
    if os.environ.has_key('NZBOP_SCRIPTDIR'): # return code for nzbget v11
        sys.exit(POSTPROCESS_ERROR)