BoardConfig.mk

#
# Copyright (C) 2013 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

TARGET_CPU_ABI := armeabi-v7a
TARGET_CPU_ABI2 := armeabi
TARGET_CPU_SMP := true
TARGET_ARCH := arm
TARGET_ARCH_VARIANT := armv7-a-neon
TARGET_CPU_VARIANT := krait

# Krait optimizations
TARGET_USE_KRAIT_BIONIC_OPTIMIZATION := true
TARGET_USE_KRAIT_PLD_SET := true
TARGET_KRAIT_BIONIC_PLDOFFS := 10
TARGET_KRAIT_BIONIC_PLDTHRESH := 10
TARGET_KRAIT_BIONIC_BBTHRESH := 64
TARGET_KRAIT_BIONIC_PLDSIZE := 64

TARGET_NO_BOOTLOADER := true

BOARD_KERNEL_IMAGE_NAME := zImage-dtb
BOARD_KERNEL_BASE := 0x00000000
BOARD_KERNEL_PAGESIZE := 2048

BOARD_KERNEL_CMDLINE := console=ttyHSL0,115200,n8 androidboot.hardware=hammerhead user_debug=31 maxcpus=2 msm_watchdog_v2.enable=1 androidboot.selinux=permissive
BOARD_MKBOOTIMG_ARGS := --ramdisk_offset 0x02900000 --tags_offset 0x02700000

# Shader cache config options
# Maximum size of the  GLES Shaders that can be cached for reuse.
# Increase the size if shaders of size greater than 12KB are used.
MAX_EGL_CACHE_KEY_SIZE := 12*1024

# Maximum GLES shader cache size for each app to store the compiled shader
# binaries. Decrease the size if RAM or Flash Storage size is a limitation
# of the device.
MAX_EGL_CACHE_SIZE := 2048*1024

BOARD_USES_ALSA_AUDIO := true

BOARD_HAVE_BLUETOOTH := true
BOARD_HAVE_BLUETOOTH_BCM := true

ifeq ($(TARGET_PRODUCT),car_hammerhead)
BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/lge/hammerhead/bluetooth_car
else
BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/lge/hammerhead/bluetooth
endif

# Wifi related defines
WPA_SUPPLICANT_VERSION      := VER_0_8_X
BOARD_WLAN_DEVICE           := bcmdhd
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
BOARD_HOSTAPD_DRIVER        := NL80211
BOARD_HOSTAPD_PRIVATE_LIB   := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
WIFI_DRIVER_FW_PATH_PARAM   := "/sys/module/bcmdhd/parameters/firmware_path"
WIFI_DRIVER_FW_PATH_AP      := "/vendor/firmware/fw_bcmdhd_apsta.bin"
WIFI_DRIVER_FW_PATH_STA     := "/vendor/firmware/fw_bcmdhd.bin"

BOARD_USES_SECURE_SERVICES := true

TARGET_NO_RADIOIMAGE := true
TARGET_BOARD_PLATFORM := msm8974
TARGET_BOOTLOADER_BOARD_NAME := hammerhead
TARGET_BOARD_INFO_FILE := device/lge/hammerhead/board-info.txt
BOARD_VENDOR_QCOM_GPS_LOC_API_HARDWARE := $(TARGET_BOARD_PLATFORM)
TARGET_NO_RPC := true

BOARD_EGL_CFG := device/lge/hammerhead/egl.cfg

USE_OPENGL_RENDERER := true
VSYNC_EVENT_PHASE_OFFSET_NS := 7500000
SF_VSYNC_EVENT_PHASE_OFFSET_NS := 5000000
TARGET_USES_ION := true

# Enable dex-preoptimization to speed up first boot sequence
ifeq ($(HOST_OS),linux)
  ifeq ($(TARGET_BUILD_VARIANT),user)
    ifeq ($(WITH_DEXPREOPT),)
      WITH_DEXPREOPT := true
    endif
  endif
endif
DONT_DEXPREOPT_PREBUILTS := true

TARGET_USERIMAGES_USE_EXT4 := true
BOARD_BOOTIMAGE_PARTITION_SIZE := 23068672
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 23068672
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1073741824
BOARD_USERDATAIMAGE_PARTITION_SIZE := 13725837312
BOARD_CACHEIMAGE_PARTITION_SIZE := 734003200
BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_FLASH_BLOCK_SIZE := 131072

BOARD_CHARGER_ENABLE_SUSPEND := true

TARGET_RECOVERY_FSTAB = device/lge/hammerhead/fstab.hammerhead

TARGET_RELEASETOOLS_EXTENSIONS := device/lge/hammerhead

BOARD_HAL_STATIC_LIBRARIES := libdumpstate.hammerhead

BOARD_SEPOLICY_DIRS += \
       device/lge/hammerhead/sepolicy

# The list below is order dependent
BOARD_SEPOLICY_UNION += \
       app.te \
       bluetooth_loader.te \
       bridge.te \
       camera.te \
       device.te \
       domain.te \
       file.te \
       hostapd.te \
       irsc_util.te \
       mediaserver.te \
       mpdecision.te \
       netmgrd.te \
       platform_app.te \
       qmux.te \
       radio.te \
       rild.te \
       rmt.te \
       sensors.te \
       ssr.te \
       surfaceflinger.te \
       system_server.te \
       tee.te \
       thermald.te \
       time.te \
       ueventd.te \
       vss.te \
       wpa.te \
       file_contexts \
       genfs_contexts \
       te_macros

HAVE_ADRENO_SOURCE:= false

OVERRIDE_RS_DRIVER:= libRSDriver_adreno.so
TARGET_FORCE_HWC_FOR_VIRTUAL_DISPLAYS := true

TARGET_TOUCHBOOST_FREQUENCY:= 1200

USE_DEVICE_SPECIFIC_QCOM_PROPRIETARY:= true
USE_DEVICE_SPECIFIC_CAMERA:= true

-include vendor/lge/hammerhead/BoardConfigVendor.mk

# Enable Minikin text layout engine (will be the default soon)
USE_MINIKIN := true

# Include an expanded selection of fonts
EXTENDED_FONT_FOOTPRINT := true

#TWRP
TW_THEME := portrait_hdpi
TW_THEME_LANDSCAPE := landscape_hdpi
BOARD_HAS_NO_REAL_SDCARD := true
RECOVERY_SDCARD_ON_DATA := true
TW_NO_USB_STORAGE := false
#TW_INCLUDE_JB_CRYPTO := true
RECOVERY_GRAPHICS_USE_LINELENGTH := true
#TARGET_RECOVERY_PIXEL_FORMAT := "RGB_565"
TARGET_RECOVERY_PIXEL_FORMAT := "RGBX_8888"
# The real path for this is /sys/devices/mdp.0/qcom,cmdss_fb_primary.160/leds/lcd-backlight/brightness but the comma doesn't compile correctly
TW_BRIGHTNESS_PATH := "/sys/devices/mdp.0/qcom\x2cmdss_fb_primary.160/leds/lcd-backlight/brightness"
TW_MAX_BRIGHTNESS := 255
#TW_NO_SCREEN_TIMEOUT := true
BOARD_USE_CUSTOM_RECOVERY_FONT := \"roboto_23x41.h\"
# Enable workaround for slow rom flash
BOARD_SUPPRESS_SECURE_ERASE := true
TW_INCLUDE_CRYPTO := true

#MultiROM config. MultiROM also uses parts of TWRP config
MR_INPUT_TYPE := type_b
MR_INIT_DEVICES := device/lge/hammerhead/multirom/mr_init_devices.c
MR_DPI := xhdpi
MR_DPI_FONT := 340
MR_FSTAB := device/lge/hammerhead/twrp.fstab
MR_KEXEC_MEM_MIN := 0x20000000
MR_KEXEC_DTB := true
MR_INFOS := device/lge/hammerhead/multirom/infos
MR_DEVICE_HOOKS := device/lge/hammerhead/multirom/mr_hooks.c
MR_DEVICE_HOOKS_VER := 3
MR_DEVICE_RECOVERY_HOOKS := device/lge/hammerhead/multirom/mr_hooks_recovery.c
MR_DEVICE_RECOVERY_HOOKS_VER := 1
MR_CONTINUOUS_FB_UPDATE := true
MR_PIXEL_FORMAT := "RGB_565"
MR_ENCRYPTION := true
MR_ENCRYPTION_SETUP_SCRIPT := device/lge/hammerhead/multirom/mr_cp_crypto.sh

DEVICE_RESOLUTION := 1080x1920
TARGET_RECOVERY_IS_MULTIROM := true
MR_NO_KEXEC := true
MR_DEVICE_SPECIFIC_VERSION := a

include device/common/version-info/MR_REC_VERSION.mk

ifeq ($(MR_REC_VERSION),)
MR_REC_VERSION := $(shell date -u +%Y%m%d)-01
endif

BOARD_MKBOOTIMG_ARGS += --board mrom$(MR_REC_VERSION)